GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: ***Show us your 3000 Series GPU***
2020/11/10 16:04:07
(permalink)
Emparus
3D printed open build.
+1 on that 3D printed Case.  Amazing looking build folks, keep em coming. 
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
mistermister
CLASSIFIED ULTRA Member
- Total Posts : 5804
- Reward points : 0
- Joined: 2008/03/29 02:38:09
- Location: San Diego
- Status: offline
- Ribbons : 13
Re: ***Show us your 3000 Series GPU***
2020/11/11 12:35:05
(permalink)
AMD 3700x / X-570 Aorus Ultra / RTX-3090 FTW3
|
hartsocks
Superclocked Member
- Total Posts : 125
- Reward points : 0
- Joined: 2010/02/20 22:06:20
- Location: Central MN
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/11 13:05:52
(permalink)
These systems are looking amazing. Making me ever more excited to get a card and get mine up and running!
Computer: Antec DF-85 Intel i7-3930K Intel 520 120GB SSD Intel DX79SI Mobo Corsair Vengence 16GB 1600MHz Mem Corsair H100 Push/Pull Corsair AX1200w PSU WD Black 3TB HDD EVGA GTX 680 HydroCopper Classified SLI Both @ 1280Boost | 3305Mem | 1.175v HWlabs GTX Gen 2 Black Ice 360mm Push/Pull 5 GT AP-15s Koolance RP-1005 Pump/res combo Primochill UV Red 3/8" Tubing Bitspower Barbs/Fittings
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: ***Show us your 3000 Series GPU***
2020/11/12 00:00:27
(permalink)
mistermister
Digital_Fuzion
Are those support brackets exclusively only for EVGA 3090's? Or are the universal for any 3090 series card?
Its a universal support bracket. Should work with any modern GPU.
https://www.v1tech.com/pr.../gpu-support-brackets/
They sure do make some nice accessory pieces for the GPU. Jmmods also makes some amazing pieces as well like their infinity backplate and GPU backet which can be controlled by a remote or even Corsair iCue.   RGB bonanza!
post edited by GTXJackBauer - 2020/11/12 00:03:02
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Digital_Fuzion
SSC Member
- Total Posts : 630
- Reward points : 0
- Joined: 2015/05/13 16:30:58
- Status: offline
- Ribbons : 1
Re: ***Show us your 3000 Series GPU***
2020/11/12 00:05:39
(permalink)
I wish it had fans built on it besides the LED - RGB light show. Up stream cool air to cool the massive 3090.
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: ***Show us your 3000 Series GPU***
2020/11/12 00:41:41
(permalink)
Lian Li Dynamic XL
post edited by KingEngineRevUp - 2020/11/12 00:47:53
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: ***Show us your 3000 Series GPU***
2020/11/12 00:47:17
(permalink)
KingEngineRevUp
Lian Li Dynamic XL
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: ***Show us your 3000 Series GPU***
2020/11/12 18:37:34
(permalink)
hartsocks
These systems are looking amazing. Making me ever more excited to get a card and get mine up and running!
They sure are.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: ***Show us your 3000 Series GPU***
2020/11/17 09:58:53
(permalink)
KingEngineRevUp
Lian Li Dynamic XL
KingEngineRevUp
KingEngineRevUp
Lian Li Dynamic XL
Your image didn't show up. Use imgur to host your image. Than right click copy the image and than paste it on here.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: ***Show us your 3000 Series GPU***
2020/11/17 10:20:04
(permalink)
GTXJackBauer
KingEngineRevUp
Lian Li Dynamic XL
KingEngineRevUp
KingEngineRevUp
Lian Li Dynamic XL
Your image didn't show up.
Use imgur to host your image. Than right click copy the image and than paste it on here.
 If you're interested in seeing the Strimer Plus cables running. I used a 24 pin on the GPU also. https://imgur.com/a/rlwWp3L This was before the 5900X and Strimer Plus cables came in   The clown lips kind of clash with it...   but that's okay, you can change the lights so the card wont' be sad. 
post edited by KingEngineRevUp - 2020/11/17 10:36:08
|
Sixtus23
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2018/09/10 17:56:22
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/17 11:10:35
(permalink)
My version of a vertical / high air flow / low noise build. 
post edited by Sixtus23 - 2020/11/17 13:50:26
|
monokitty
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2016/03/01 12:04:04
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/17 12:18:09
(permalink)
Excuse some of the mess. XC3 Ultra.
Attached Image(s)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102300
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: ***Show us your 3000 Series GPU***
2020/11/17 12:45:20
(permalink)
This is mine: 
|
buttabean
Superclocked Member
- Total Posts : 230
- Reward points : 0
- Joined: 2018/01/29 15:32:46
- Status: offline
- Ribbons : 2
Re: ***Show us your 3000 Series GPU***
2020/11/17 12:51:17
(permalink)
work in progress. I plan to rework everything once the gpu is under water.
post edited by buttabean - 2020/11/17 12:55:54
Attached Image(s)
Associate Discount Code: KQ9JGG4415FXHVQ
|
mizzer
iCX Member
- Total Posts : 309
- Reward points : 0
- Joined: 2010/02/06 12:52:24
- Status: offline
- Ribbons : 1
Re: ***Show us your 3000 Series GPU***
2020/11/17 18:02:00
(permalink)
Awesome pics! Y’all making me want to water-cool my 3900x.
Gigabyte Aorus Master x570 * AMD 5900X * 32GB G.SKILL Trident 3600 * Arctic Liquid Freezer II 420 * GeForce 4090 FE * Corsair RM1000x PSU * 1TB Samsung 970 EVO NVMe * 2x 2TB Samsung 870 QVO SSDs * LG OLED48CXPUB * Fractal Design Meshify 2 XL
|
djofonunez
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2012/09/14 19:24:58
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/18 09:55:12
(permalink)
Hi. I have the same case!
Did you use the Phanteks Vertical GPU Bracket? Did the 3080 fit without any problems in there? How ware your thermals on the vertical GPU?
Thanks,
|
djofonunez
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2012/09/14 19:24:58
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/18 09:57:00
(permalink)
Hi. I have the same case! Did you use the Phanteks Vertical GPU Bracket? Did the 3080 fit without any problems in there? How ware your thermals on the vertical GPU? Thanks, ex90ranger
|
Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
Re: ***Show us your 3000 Series GPU***
2020/11/18 18:13:50
(permalink)
KingEngineRevUp
The clown lips kind of clash with it...
but that's okay, you can change the lights so the card wont' be sad.
Awwww yiss.
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
pmclean
Superclocked Member
- Total Posts : 154
- Reward points : 0
- Joined: 2011/06/10 18:26:21
- Location: Canada
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/18 18:50:07
(permalink)
   I really love how the FTW3 looks. I didn't have much lighting in my case before this card. I think it looks awesome with the EVGA Audio card underneath it. It doesn't look so big in a full tower though. It's a Corsair Obsidian 800D. The card really brings my computer into the RGB age lol. I really like how there are several parts that light up, the EVGA on the top of the card and it's not shown in these photos but the EVGA on the end of the card as well. The air blowing through the GPU helped lower the temp of my PCH of my motherboard. Previous card didn't allow air to pass through so the fan from the bottom of the case couldn't cool that part of the motherboard very well. The average temp of the PCH dropped by a full 10°C after installing this card. I have 7 case fans and 3 fans on the CPU cooler so helping the air pass through the case properly helped a decent amount. My previous card was a Gigabyte RTX 2070 Super Gaming OC 3X White. It was very well performing 2070 Super but gaming at close to 4K the 3090 have close to doubled the frame rates I used to have. I am very happy with my 3090. Thank EVGA for addressing the failed Nvidia launch. I had preordered(paid in full) a card from memory express here in canada, I had waited over 6 weeks and they refused to give any info about position in queue or the total number of preorders. They also gave no updates about when you might receive your card so when I got a purchase link email from EVGA I jumped on it instantly and cancelled my preorder from memory express and got a full refund.
post edited by pmclean - 2020/11/18 18:54:39
Current Build Direct die 10900KF w/Grizzly LM w/Optimus V2 Sig Block on an ASUS Maximus XII Apex, 32 GB 4000MT/s Cl 15 G.Skill Trident Z Royal RAM, EVGA RTX 3090 KingPin w/Optimus Waterblock, EVGA RTX 3090 FTW3 Ultra w/Optimus Absolute Waterblock, EVGA 1600W G+ PSU, 2 x Corsair MP510 960GB M.2 RAID0, 2 x WD Blue 1 TB SSD RAID0, 2 x 6TB WD Red Pro 7200RPM HDD RAID0, EVGA Nu Audio Card, Lian Li Strimer Plus 3x8 Pin & 24 Pin, Corsair 7000D White Case, 7 x Lian Li SL140 Fans, Corsair XD7 Distro Plate w/Xylem D5 Pump, Samsung 55" QN90A, Samsung c49RG9 Ultrawide Monitor, HyperX Cloud Orbit Headphones, Sony AV Reciever STR-DN 1080, KEF Q Series 5.1 Speakers, Glorious Model D Gaming Mouse, SteelSeries Apex Pro KB, Corsair MM300 XL & MM350 XL Gaming Mouse Pad, Vartan Gaming Chair, APC Back UPS PRO BR 1350VA, MO-RA3 420 w/ 2 x WCP D5-Vario Pumps w/HeatKiller D5-TOP, PrimoChill RevolverSX UV Pink Rigid Fittings.
|
ex90ranger
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2014/11/14 12:39:01
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/18 18:56:27
(permalink)
djofonunez
Hi. I have the same case!
Did you use the Phanteks Vertical GPU Bracket? Did the 3080 fit without any problems in there? How ware your thermals on the vertical GPU?
Thanks,
ex90ranger
yup yup, used the Phanteks vertical mount kit. and didn't need to modify anything to make it fit. where it screws to the back of the case, it is a little fiddly and it is easy to nearly cross thread the screws. but if they give you any resistance screwing in just wiggle the bracket a little bit and they should drop in place. here is a pic of the bracket mounted. ignore the fact I have the cable plugged into the wrong PCI slot on the motherboard. LOL. it's in slot 1 like it should be. https://cdna.pcpartpicker.com/static/forever/images/userbuild/297747.40a3fd2630472d73f4f718d3c0f05dfc.1600.jpg and it is slightly bent vertically because I have one of the included foam pads under it. once I got the card installed I took the pad out.
Main system Intel 6850k / Asus Rampage Extreme V Edition 10 / 32g 3200 Corsair Dominator RGB / EVGA RTX 3080 FTW3 Ultra / Samsung 950 pro NVME 500g / Samsung 850 Evo 1t / Samsung 850 Evo 1t https://pcpartpicker.com/b/J4CLrH Media system AMD 3400g / Asus Strix B450-i / 16g 3600 Corsair Dominator RGB / Samsung 970 Evo 500g / Samsung 850 Evo 500g https://pcpartpicker.com/b/vyf9TW Both systems installed in Phantex Enthoo 719 Dual system case powered by Phantex Revolt X 1200 dual system PSU
|
buttabean
Superclocked Member
- Total Posts : 230
- Reward points : 0
- Joined: 2018/01/29 15:32:46
- Status: offline
- Ribbons : 2
Re: ***Show us your 3000 Series GPU***
2020/11/18 20:11:20
(permalink)
djofonunez
Hi. I have the same case!
Did you use the Phanteks Vertical GPU Bracket? Did the 3080 fit without any problems in there? How ware your thermals on the vertical GPU?
Thanks,
ex90ranger
How are your m2 ssd drive temps with the vertical mount? I noticed my primary drive is running pretty hot with the 3090 ftw3 horizontally mounted. I have two identical drives. The one by the video card is running 13C higher. 72C vs 59C. Can't wait to get this gpu a waterblock!
Associate Discount Code: KQ9JGG4415FXHVQ
|
ex90ranger
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2014/11/14 12:39:01
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/18 21:27:21
(permalink)
buttabean
djofonunez
Hi. I have the same case!
Did you use the Phanteks Vertical GPU Bracket? Did the 3080 fit without any problems in there? How ware your thermals on the vertical GPU?
Thanks,
ex90ranger
How are your m2 ssd drive temps with the vertical mount? I noticed my primary drive is running pretty hot with the 3090 ftw3 horizontally mounted. I have two identical drives. The one by the video card is running 13C higher. 72C vs 59C. Can't wait to get this gpu a waterblock!
on this motherboard the NVME is mounted next to the ram on the edge of the board. and honestly vertically mounting the card was a good move because fan 3 being a blow through design blows air right on the NVME. I flipped the BIOS switch over to the OC on my card so the fans are locked on so there is always air moving over it. right now, as I type this my drive is 46 degrees according to the samsung software. without the 3080 fan blowing air over it, it is around 58. and I have also noticed that case fan 1 and fan 2 are cycling off from time to time. those are set for my chipset temps. so I know that has been running a little cooler as well. and even when gaming having hot air blow on stuff doesn't seem to be raising the temps more than about 4 or 5 degrees. moving hot air is still better than no air.
Main system Intel 6850k / Asus Rampage Extreme V Edition 10 / 32g 3200 Corsair Dominator RGB / EVGA RTX 3080 FTW3 Ultra / Samsung 950 pro NVME 500g / Samsung 850 Evo 1t / Samsung 850 Evo 1t https://pcpartpicker.com/b/J4CLrH Media system AMD 3400g / Asus Strix B450-i / 16g 3600 Corsair Dominator RGB / Samsung 970 Evo 500g / Samsung 850 Evo 500g https://pcpartpicker.com/b/vyf9TW Both systems installed in Phantex Enthoo 719 Dual system case powered by Phantex Revolt X 1200 dual system PSU
|
Ajax0z
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2015/04/11 05:59:24
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/19 00:09:39
(permalink)
nomnom :)
Attached Image(s)
|
gravedigger78
SSC Member
- Total Posts : 964
- Reward points : 0
- Joined: 2010/05/21 13:26:03
- Location: Michigan
- Status: offline
- Ribbons : 2
Re: ***Show us your 3000 Series GPU***
2020/11/19 11:50:49
(permalink)
All my pictures are too big and I don't feel like fixing them right now. I have a Fractal Design Define 7 with the vertical mount and stuff super nice. I imagined my build to be like KingEngineRevUp's but it came out like a potato. I will try and get some pictures soon. I have a 3090 FTW3 Ultra
|
gravedigger78
SSC Member
- Total Posts : 964
- Reward points : 0
- Joined: 2010/05/21 13:26:03
- Location: Michigan
- Status: offline
- Ribbons : 2
Re: ***Show us your 3000 Series GPU***
2020/11/19 11:57:56
(permalink)
I think this will work
Attached Image(s)
|
gonsa
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2007/12/15 09:04:11
- Location: Lisbon
- Status: offline
- Ribbons : 1
Re: ***Show us your 3000 Series GPU***
2020/11/20 03:00:37
(permalink)
Greetings ;) 
post edited by gonsa - 2020/11/22 12:50:15
Case: Lian Li OD 11 | Mobo: MSI MAG X570 Tomahawk Wifi | CPU: AMD 3700X | Memory: G.Skill Trident Z Neo 32 GB DDR4-3600 CL16 | Graphics Card: EVGA 3080 FTW3 Ultra | SSD: Samsung 970 Evo 1 TB M.2-2280 NVME | Samsung 860 Evo 500 GB | PSU: SuperNOVA G2 1000W | Sound Speakers: Creative Inspire T3100 | Mouse: Logitech G903 | Monitor: LG 34GN850-B 34.0" 3440x1440 144 Hz
|
Pennywise359
New Member
- Total Posts : 49
- Reward points : 0
- Joined: 2016/07/14 23:08:23
- Status: offline
- Ribbons : 0
|
R3L3NTL3SS
SSC Member
- Total Posts : 575
- Reward points : 0
- Joined: 2020/09/07 16:38:12
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/20 04:43:06
(permalink)
Too lazy to remove side panel for a more clear shot lol. 
|
danilaplee
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2020/11/06 06:32:28
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2020/11/20 05:09:36
(permalink)
can anybody suggest how to get more than 15500 on timespy? and I'am constantly crashing to desktop when overclocking past 2ghz, the temps are quite low about 80-82c on 2130mhz the case is nzxt h210i modded with extra case fans on both sided of the aio radiator and the cpu is 10600k with asus z490i motheboard very stable on 5.1ghz 
post edited by danilaplee - 2020/11/20 05:23:56
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: ***Show us your 3000 Series GPU***
2020/11/20 05:12:32
(permalink)
danilaplee
can anybody suggest how to get more than 15500 on timespy? and I'am constantly crashing when overclocking past 2ghz, the temps are quite low about 80-82c on 2130mhz
the case is nzxt h210i modded with extra case fans on both sided of the aio
and the cpu is 10600k with asus z490i
If you want it to boost more for better scores your gonna have to keep the temps lower then that or it's not gonna happen.
|