ilukeberry
I see almost 100% non-EVGA motherboards! **** guys!

I am a stereo typical example of brand loyal.  I have used ASUS motherboards for 20 years, used Corsair ram going back to DDR2, and EVGA video cards back to the 660ti.  if I don't have any problems with it, then the next thing I buy will be from the same brand.  

Got mine a few days ago. So far so good.



MB : MSI X570 TOMAHAWK
CPU : Amd Ryzen 7 3700X - PBO enabled (Enhanced Mode 3)
CPU Cooler : Noctua NH-D15
GPU : EVGA RTX 3080 FTW3
PSU : Seasonic Focus 850W Plat
RAM : 16Gox2 3200Mhz

Port Royal best score : (+200 Clock / +500 Mem)

Dabadger84
Current iteration of fan arrangement (it's changed a lot the last week):
 

I can practically hear the fans through the picture. Your system temps must be amazing wow.

LinS123
I can practically hear the fans through the picture. Your system temps must be amazing wow.

Funny that even I would think that, but if I set the fans properly (50%), it's actually not noticeably loud at all, and still runs decently cool.  At the fan profile I normally use, it's "noticeable" but not obnoxious.  Most of the fans set to 70% in that case.  I have 2 fans that are for some odd reason louder than the rest, on the front of the case, going to remount those (the top two, oddly, they're the same kind of fan but 2 different sizes) & see if I can fix that because there's no reason for them to be making more noise than the rest at the same fan speed settings.
I'm going to be swapping the two intake fans for the Vardar 120s that are currently under the GPU, putting one of the 140s currently on the top as intake back as the rear exhaust (it just works better & makes less noise, weird but true), I have 1 more Vardar 120 I'll put down there as the expansion slot exhaust, then I'll have a 140 that's not in the system anymore... unless I decide to stick it on the RAM & pull the one currently on the RAM...
I should try a Vardar on the RAM just for the heck of it.  If you've never used EK Vardars I highly recommend them, they are pretty much dead silent at ~50% and still move a good bit air than the other 120s I have at that speed, which is why I'm moving two of them to VRM/RAM intake duty.
Once I get my Hybrid card & the fan setup is more permanent, I plan on doing rubber fan screw replacements on as many fans as I can, to further reduce vibration noise...
As for temps, current idles with 71F ambient:
 

 
The "maximum temps" were while gaming for about 2 hours earlier in the morning, RAM fan was only at 50% so the RAM got a bit warmer than I expected... and the Sabrent M.2 (second drive listed) was getting intermitently warm because I'm currently preloading Watch Dogs Legion on to it, and it's also the drive with the game I was playing on it... as well as it being in the "exhaust path" of the 3080 as much as the main M.2 drive is.  Can't wait to get a Hybrid card again so that will no longer be an issue.
 

rain2_usa
 
My eyes hurts looking at this. It looks like one of those carnival mirror rooms with RGB. lol.  That case makes the 3080 look small too. Beautiful still and like others have said, you must have some great temps.

 
It is a large case, I'm planning to go full open loop at some point, which is what it's designed for:
 

Attached is a picture of my 3080 FTW3 Ultra.  I realize it may look like many others' 3000 series, but it still looks pretty sweet, doesn't it?

Here's my 3090s:

ex90ranger

 
https://pcpartpicker.com/b/J4CLrH
 

What am I looking at here... are you running TWO motherboards in a single case?  Dude if so, that's wack and dope as hell all at the same time :)  Nicely done.

Unfortunately not an EVGA card, I just randomly went to the Nvidia store (UK) to see the MSRP and I saw it was in stock, I just got insanely lucky to find a card at that time. Was insanely power limited at 400w though even with 0 clock offsets, and the 3090 Kingpin looks way too tempting so I sold it onto a friend for the same price I bought it, was fun while it lasted, now I've gone back to my ol' reliable 980ti Kingpin until I can get my hands on the 3090 KP :D It's just a matter of being patient now, the FTW3's look really tempting to me especially with the new beta bios to raise the power limit and then if I watercool it I'd be pretty near a Kingpin I'd think. Here's to hoping I can wait!

2 EVGA GeForce RTX 3090 FTW3 ULTRA in SLI​

mike211

2 EVGA GeForce RTX 3090 FTW3 ULTRA in SLI​

Nice, not fair, but nice