kooptroop14
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/08/05 13:40:30
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/05 14:16:57
(permalink)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10333
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: ***Show us your 3000 Series GPU***
2021/08/09 01:40:15
(permalink)
KingEngineRevUp
I can't seem to make up my damn mind. I posted before the QL120s were horrible radiator fans but they look really nice. Well I went back to my ML120 Capellix... The edges are a little dull, so I added a RGB strip around them. It's like a disco in my build now.
Before left, After right. Temps are a 5C difference on the GPU...
Nice build! The QL120s are decent fans but more so for aesthetics than compared to rad fans. ML120s are better equipped between the two since they were designed more towards rads as you displayed.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
stelladaurmond
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2021/08/06 16:41:35
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/10 13:56:11
(permalink)
some beautiful systems! I can't wait to get mine built
|
Explixit
New Member
- Total Posts : 70
- Reward points : 0
- Joined: 2021/03/26 12:01:51
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/11 14:06:03
(permalink)
kpdunphy
Temp battle station until new home is ready. It will do just fine with my new 3080 ti!
Nice theme, can't help but stare :)
|
GodzReaper_89
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2021/06/30 06:34:28
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/11 14:49:22
(permalink)
My very first PC build, took some time and to gather all the components I wanted to build.. But the end result was well worth the wait! Ryzen 7 5800x EVGA FTW3 3070ti Corsair 32GB 3200mhz ram Asus B550-A Asus Tuf GT501 white case
post edited by GodzReaper_89 - 2021/08/11 14:50:46
Attached Image(s)
Ryzen 7 5800x | FTW3 3070ti | Asus Rog B550-A | 980pro 2tb m.2 | 870 QVO 2tb SSD |WD 500GB m.2 | Corsair 32GB 3200mhz  
|
Explixit
New Member
- Total Posts : 70
- Reward points : 0
- Joined: 2021/03/26 12:01:51
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/11 16:30:58
(permalink)
GodzReaper_89
My very first PC build, took some time and to gather all the components I wanted to build.. But the end result was well worth the wait!
Ryzen 7 5800x
EVGA FTW3 3070ti
Corsair 32GB 3200mhz ram
Asus B550-A
Asus Tuf GT501 white case
Nice, I regret not getting a Ryzen 5000 series... Have you done some of the 3DMark benchmarks for your build yet?
|
outrage
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2009/03/27 10:25:39
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/11 16:51:24
(permalink)
nothing too fancy around here, need to up my OCD game. 
post edited by outrage - 2021/08/11 16:54:22
Attached Image(s)
|
redteamgo
SSC Member
- Total Posts : 802
- Reward points : 0
- Joined: 2013/11/16 13:20:08
- Status: offline
- Ribbons : 3
Re: ***Show us your 3000 Series GPU***
2021/08/12 10:02:06
(permalink)
CPU: Intel 12900K EK 1700 Quantum Mag AcetelGPU: EVGA 3090 KPHCMB: EVGA Z690 DarkPSU: EVGA SuperNOVA 1600 P+Memory: G.SKILL Z5 6600mhz XMP3NVME: Samsung 980 Pro Gen 4 1TB, Gen 3 970 1TBCooling: MO-RA3 420 P/P 8x200mm Noctua HS PWM, Dual D5Case: Fractal Design Define 7 MOD Rigs!!!
|
stevenon1003
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/04/23 09:35:31
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/12 17:47:54
(permalink)
I am hoping I can see any PC without RGB :-)
|
fuzzdad
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2007/12/19 21:13:08
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/12 18:48:25
(permalink)
 In-process build. 3080 FTW3 Ultra w/EKWB Vector FTW3 GPU block, 1000W Seasonic, 480 and 360 EKWB rad (thin), Bitspower, EK and other fittings, Intel 10700K CPU, Asus TUF Z590, a couple of Samsung M2's for storage, a 4.0 riser card, and I accidentally purchased the same speed RAM....but different sizes so it's 48GB (2x16, 2x8). Still have custom cables on the way and thinking of going back to bending hardline....this was an excercise in straight-line/90 degree hardline. Case, fans, rads, pump/res fittings all hand-me-downs from last build. Did the JayzTwoCents mini-monitor deal using ADA64 on a 7" raspberry monitor to see stats. Idles at 31C CPU, 27C GPU. CPU rarely gets over 60C in stress tests. And cell photo sucks...apologies.
post edited by fuzzdad - 2021/08/12 18:52:13
Attached Image(s)
|
rottentreats
Superclocked Member
- Total Posts : 242
- Reward points : 0
- Joined: 2011/10/07 23:54:35
- Status: offline
- Ribbons : 6
Re: ***Show us your 3000 Series GPU***
2021/08/12 19:25:42
(permalink)
stevenon1003
I am hoping I can see any PC without RGB :-)
It's all personal preference but I am with you my dude. I often run my system no lights (to really dive into a game) or limited to green only because I like the contrast. Nice builds everyone keep them pics coming!
post edited by rottentreats - 2021/08/15 15:27:53
Attached Image(s)
GPU: EVGA GeForce RTX 3080 Ti FTW3 ULTRA HYBRID
|
Lordred
SSC Member
- Total Posts : 674
- Reward points : 0
- Joined: 2010/03/21 19:44:16
- Status: offline
- Ribbons : 5
Re: ***Show us your 3000 Series GPU***
2021/08/12 22:33:32
(permalink)
I scored a 3090 FTW3 Ultra today, just need to wait for it to arrive, wasn't even looking for the 3090, just kind of happened. I'll be sure to follow up with pictures, just very happy to get it.
|
tnecniv4815
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2021/06/17 01:00:52
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/14 01:49:50
(permalink)
I want to be 30 series family...
|
Explixit
New Member
- Total Posts : 70
- Reward points : 0
- Joined: 2021/03/26 12:01:51
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/15 14:16:27
(permalink)
Lordred
I scored a 3090 FTW3 Ultra today, just need to wait for it to arrive, wasn't even looking for the 3090, just kind of happened. I'll be sure to follow up with pictures, just very happy to get it.
Nice, is that going in your Sparkplug build?
|
Lordred
SSC Member
- Total Posts : 674
- Reward points : 0
- Joined: 2010/03/21 19:44:16
- Status: offline
- Ribbons : 5
Re: ***Show us your 3000 Series GPU***
2021/08/15 16:40:07
(permalink)
Explixit
Nice, is that going in your Sparkplug build?
Yep it was part of the full system update, I've been dial in my undervolt setting on both system and gpu total package swings in under 420w from the wall with incredible performance. I am most happy with this 3090/5950x
|
Matis78
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2021/08/08 19:07:56
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/16 09:41:15
(permalink)
Lots of nice builds. Cant wait to get my GPU to complete mine.
|
GTXMan
Superclocked Member
- Total Posts : 228
- Reward points : 0
- Joined: 2007/11/08 14:03:18
- Status: offline
- Ribbons : 3
Re: ***Show us your 3000 Series GPU***
2021/08/16 13:44:55
(permalink)
Stage 1 of the new build complete while I wait for Optimus block.   There was a lot of anxiety-inducing measuring and drilling to create the cable management ports and I was able to fabricate mounts for the LCD and DualSense and position them perfectly so I could use a few headers at the bottom of the mobo. This build tested my patience and at one point seemed like it wasn't going to be anything like I imagined but it all came together with perseverance and my renowned L-bracket engineering skills, lol Once the Optimus block is on I'll probably throw my old NZXT RGB strips inside the case, add my other two NVMes, do all the cable management and close it up, throw on that Galax 1000W BIOS and crank the card. Solid chip based on my testing on air so optimistic for results on water.
 Current rig: DCS4VR 3.0Thermaltake Core P5 || 7700k + Aquacomputer Kuplex Cryos NEXT w/ VISION || EVGA XC Gaming 2080Ti + EK Vector block/backplate || G-Skill Trident Z 32GBs DDR4-4000 || ASUS Maximus IX Code || LG 38GL950G-B|| Logitech G900 || Sony WH1000-XM4 || VIVE Pro
|
Explixit
New Member
- Total Posts : 70
- Reward points : 0
- Joined: 2021/03/26 12:01:51
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/16 13:51:12
(permalink)
GTXMan
Stage 1 of the new build complete while I wait for Optimus block.
There was a lot of anxiety-inducing measuring and drilling to create the cable management ports and I was able to fabricate mounts for the LCD and DualSense and position them perfectly so I could use a few headers at the bottom of the mobo. This build tested my patience and at one point seemed like it wasn't going to be anything like I imagined but it all came together with perseverance and my renowned L-bracket engineering skills, lol
Once the Optimus block is on I'll probably throw my old NZXT RGB strips inside the case, add my other two NVMes, do all the cable management and close it up, throw on that Galax 1000W BIOS and crank the card. Solid chip based on my testing on air so optimistic for results on water.
Woah! what a sick build, and only just starting. Can't wait to see what's next! Where does the water travel through after the CPU?
post edited by Explixit - 2021/08/16 13:53:49
|
GTXMan
Superclocked Member
- Total Posts : 228
- Reward points : 0
- Joined: 2007/11/08 14:03:18
- Status: offline
- Ribbons : 3
Re: ***Show us your 3000 Series GPU***
2021/08/16 14:09:40
(permalink)
Explixit
GTXMan
Stage 1 of the new build complete while I wait for Optimus block.
There was a lot of anxiety-inducing measuring and drilling to create the cable management ports and I was able to fabricate mounts for the LCD and DualSense and position them perfectly so I could use a few headers at the bottom of the mobo. This build tested my patience and at one point seemed like it wasn't going to be anything like I imagined but it all came together with perseverance and my renowned L-bracket engineering skills, lol
Once the Optimus block is on I'll probably throw my old NZXT RGB strips inside the case, add my other two NVMes, do all the cable management and close it up, throw on that Galax 1000W BIOS and crank the card. Solid chip based on my testing on air so optimistic for results on water.
Woah! what a sick build, and only just starting. Can't wait to see what's next!
Where does the water travel through after the CPU?
VRM block. The "Formula" model of ROG Maximus boards have it standard.
Current rig: DCS4VR 3.0Thermaltake Core P5 || 7700k + Aquacomputer Kuplex Cryos NEXT w/ VISION || EVGA XC Gaming 2080Ti + EK Vector block/backplate || G-Skill Trident Z 32GBs DDR4-4000 || ASUS Maximus IX Code || LG 38GL950G-B|| Logitech G900 || Sony WH1000-XM4 || VIVE Pro
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: ***Show us your 3000 Series GPU***
2021/08/16 17:17:44
(permalink)
GTXMan,
Nice work so far while you wait for new water block. Just wanted to point out as sick as his build is now, it's going to be be better when he gets his water block in and can do your hard tubing like the rest of your build. Very nice overall with the status screen and controller mount. Love the choice of case, it really displays your components well.
I finished my rebuild last week, new AL120 unifans and changed over the CPUs. It took a bit longer for me, but in the end it came out good.
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
Lordred
SSC Member
- Total Posts : 674
- Reward points : 0
- Joined: 2010/03/21 19:44:16
- Status: offline
- Ribbons : 5
Re: ***Show us your 3000 Series GPU***
2021/08/16 17:42:33
(permalink)
Anything to show off for the moment! I'm loving the 3090 so far. 
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: ***Show us your 3000 Series GPU***
2021/08/19 23:01:25
(permalink)
|
Nereus
Captain Goodvibes
- Total Posts : 18163
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: ***Show us your 3000 Series GPU***
2021/08/19 23:31:30
(permalink)
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: ***Show us your 3000 Series GPU***
2021/08/20 00:08:54
(permalink)
Nereus
^ nice build!
Thanks. I had a lot of anxiety putting it together.
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: ***Show us your 3000 Series GPU***
2021/08/20 00:13:04
(permalink)
Here's mines after the change out for the 5950 and new AL120 unifans.  Here is my sensor panel that I modified from the Aida 64 boards for my pc. 
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
Nereus
Captain Goodvibes
- Total Posts : 18163
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: ***Show us your 3000 Series GPU***
2021/08/20 08:10:10
(permalink)
Gotspeed_2000
Here's mines after the change out for the 5950 and new AL120 unifans.
*snip*
Here is my sensor panel that I modified from the Aida 64 boards for my pc.
*snip*
Nice! I really like the AIDA64 sensor panel, I'm trying to get it to read all the data from the G.Skill memory - can't seem to pick up voltage, which was never a problem with my previous Corsair memory. Sadly it won't pick up my water temp sensor from iCue / Corsair Commander either, but that's because Corsair haven't put hooks in to allow it.
|
Networx2002
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2021/07/13 19:53:27
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/20 11:28:45
(permalink)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10333
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: ***Show us your 3000 Series GPU***
2021/08/24 06:06:53
(permalink)
GodzReaper_89
My very first PC build, took some time and to gather all the components I wanted to build.. But the end result was well worth the wait!
Ryzen 7 5800x
EVGA FTW3 3070ti
Corsair 32GB 3200mhz ram
Asus B550-A
Asus Tuf GT501 white case
.jpg)
Congrats on your first build. Well done!
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Networx2002
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2021/07/13 19:53:27
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/24 10:51:38
(permalink)
|
Networx2002
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2021/07/13 19:53:27
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/08/24 10:53:57
(permalink)
How many panels did you us of the AIDA64 sensor panel
|