First of all please forgive my bad English.Google Translate is used for the parts that can not be expressed
As you can see,The light under the word “3080ti” won't light up
Then I found that if I change the light effect controlled by Px1 software as shown in the picture：
In fact, the lighting effect in the position as shown in the figure is changed, and there is no lighting effect in the original position.
=============================================================================
What did I do before the error occurred:
1.flashed the vbios in
WITHOUT TURN OFF "FAST BOOT" IN MY MOTHERBOARD BIOS.2.Run Time spy in 3Dmark
I didn’t notice the error the first time it happened, it was already like this when I realized it.
=============================================================================
What have I done to solve the problem so far：
1.Reflashed the vbios
WITH TURN OFF "FAST BOOT" IN MY MOTHERBOARD BIOS.
2.Set as default settings in PX1 software.
3.Reboot, of corse.
I suspect that there is a problem with the addressing of the light effect due to some reasons.
For some reasons, RMA will be very troublesome, I hope I can solve the problem by myself.
SOLVED:I flashed a different bios ,after restart,px1 shows that firmare needs to be update，then everything returned!
Now I know, I wrongly flashed the bios of hybrid :-[
post edited by lionheart2133 - 2021/10/04 23:43:29