EVGA

Hot!*OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin

Page: << < ..678910.. > >> Showing page 7 of 59
Author
wwxww
iCX Member
  • Total Posts : 460
  • Reward points : 0
  • Joined: 2019/01/13 09:30:51
  • Location: New Orleans
  • Status: offline
  • Ribbons : 1
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/09 08:46:46 (permalink)
QueueCumber
The good news is I found someone locally to sell me an Asus 3090 Strix OC at close enough to cost to not bother me. So, I will text how that card works on my 10900k and 5950x setups in comparison.
 
BTW, between the two setups, I seem to always fall 400 lower on my msi godlike and 5950x setup. Odd, considering it should be a gpu test only...




Did you ever figure out why your AMD setup was falling behind the Intel setup and does that statement still ring true today? What about Firestrike and Timespy graphics Scores? Same thing?
DarkClownX1X
Superclocked Member
  • Total Posts : 181
  • Reward points : 0
  • Joined: 2020/11/08 08:42:08
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/09 23:42:02 (permalink)
wwxww
QueueCumber
The good news is I found someone locally to sell me an Asus 3090 Strix OC at close enough to cost to not bother me. So, I will text how that card works on my 10900k and 5950x setups in comparison.
 
BTW, between the two setups, I seem to always fall 400 lower on my msi godlike and 5950x setup. Odd, considering it should be a gpu test only...




Did you ever figure out why your AMD setup was falling behind the Intel setup and does that statement still ring true today? What about Firestrike and Timespy graphics Scores? Same thing?




I wonder if this is what I'm running into on my 5900X I seem to be falling short of others KP numbers.

 
CPU: Ryzen 5900X
MB:  Aorus Master x570
GPU: RTX 3090 Kingpin Hybrid->HC 
 
 
redarman
Superclocked Member
  • Total Posts : 215
  • Reward points : 0
  • Joined: 2020/01/30 05:45:42
  • Status: offline
  • Ribbons : 1
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 09:57:45 (permalink)
Are we going to get a guide for the card? What do the dip switches on the back do?
jayrwar
Superclocked Member
  • Total Posts : 113
  • Reward points : 0
  • Joined: 2020/05/27 06:42:57
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 11:23:20 (permalink)
Can't wait to get this
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10159
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 17:06:26 (permalink)
redarman
Are we going to get a guide for the card? What do the dip switches on the back do?



It's to switch between different BIOS.

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
doorules
CLASSIFIED Member
  • Total Posts : 4510
  • Reward points : 0
  • Joined: 2007/12/18 02:08:14
  • Location: Newfoundland
  • Status: offline
  • Ribbons : 21
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 17:23:25 (permalink)
GTXJackBauer
redarman
Are we going to get a guide for the card? What do the dip switches on the back do?



It's to switch between different BIOS.


There is a separate switch for going from one bios to another. 
The dipswitches add a set amt of voltage to different components of the gpu. you can add to the core V, mem load line and gpu load line
 
Scroll down on this guide for the 2080ti KP for a better description
https://xdevs.com/guide/2080ti_kpe/
mylittlepwny2
New Member
  • Total Posts : 78
  • Reward points : 0
  • Joined: 2020/03/25 04:14:13
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 18:02:15 (permalink)
Can anyone link me to some Kingpin 3090 Port Royal runs? I wish I knew if my card was good or not... where is everyone seeing others results?
doorules
CLASSIFIED Member
  • Total Posts : 4510
  • Reward points : 0
  • Joined: 2007/12/18 02:08:14
  • Location: Newfoundland
  • Status: offline
  • Ribbons : 21
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 18:04:56 (permalink)
my latest, using cold air
 
http://www.3dmark.com/pr/637981
creekthagray
New Member
  • Total Posts : 92
  • Reward points : 0
  • Joined: 2009/07/06 11:28:31
  • Status: offline
  • Ribbons : 3
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 18:43:13 (permalink)
Stock cooling in Lian Li case
https://www.3dmark.com/pr/637379
cold air ac assist
https://www.3dmark.com/pr/567385
 

3090 Kingpin Hybrid --> sold to a friend after que for Hydro copper opened (  que never Moved)
15039 3DMark Port Royal Hall of Fame #54 on 11/29/2020
 
3090 FTW3 Hybrid  --> current till KP Hydro copper que moves
15053 3DMark Port Royal 9/17/2021
15351 3DMark Port Royal 1/22/2022
 
Gigabyte X570 Aorus Master
AMD Ryzen 7 5800x 
G.SKILL Trident Z Neo 32GB (4 x 8GB) DDR4 3600
creekthagray
New Member
  • Total Posts : 92
  • Reward points : 0
  • Joined: 2009/07/06 11:28:31
  • Status: offline
  • Ribbons : 3
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 18:45:36 (permalink)
doorules
GTXJackBauer
redarman
Are we going to get a guide for the card? What do the dip switches on the back do?



It's to switch between different BIOS.


There is a separate switch for going from one bios to another. 
The dipswitches add a set amt of voltage to different components of the gpu. you can add to the core V, mem load line and gpu load line
 
Scroll down on this guide for the 2080ti KP for a better description
https://xdevs.com/guide/2080ti_kpe/


videos
overview
https://www.youtube.com/watch?v=AuNTUvO6dl0
2nd has dip switch info. and voltages at boost lock
https://www.youtube.com/watch?v=KV6OB5wxtNw
 

3090 Kingpin Hybrid --> sold to a friend after que for Hydro copper opened (  que never Moved)
15039 3DMark Port Royal Hall of Fame #54 on 11/29/2020
 
3090 FTW3 Hybrid  --> current till KP Hydro copper que moves
15053 3DMark Port Royal 9/17/2021
15351 3DMark Port Royal 1/22/2022
 
Gigabyte X570 Aorus Master
AMD Ryzen 7 5800x 
G.SKILL Trident Z Neo 32GB (4 x 8GB) DDR4 3600
cakesg
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2020/11/06 20:46:30
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 20:26:28 (permalink)
Is the hybrid kingpin cooler good? I want a hydrocopper but I might just get the hybrid if it cools well enough for me to run it without temperature throttling
jayrwar
Superclocked Member
  • Total Posts : 113
  • Reward points : 0
  • Joined: 2020/05/27 06:42:57
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/13 23:21:30 (permalink)
Seems to run cool.
fox_steeda
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2020/09/17 23:43:55
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/14 19:43:06 (permalink)
Has anyone tried using Liquid Metal on any Kingpin cards?
fragility_V1
SSC Member
  • Total Posts : 918
  • Reward points : 0
  • Joined: 2015/07/16 10:02:01
  • Location: Southern California
  • Status: offline
  • Ribbons : 3
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/14 21:03:25 (permalink)
fox_steeda
Has anyone tried using Liquid Metal on any Kingpin cards?

For a shunt mod?  or replacing the stock TIM?
fox_steeda
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2020/09/17 23:43:55
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/14 21:30:44 (permalink)
fragility_V1
fox_steeda
Has anyone tried using Liquid Metal on any Kingpin cards?

For a shunt mod?  or replacing the stock TIM?


Just to replace stock TIM to shed a few Cs on air. I’ve done it on my 2080 ti Strix OC and it shaved around 3Cs avg. Just curious if anyone has tried it on a Kingpin Hybrid before and if there were any measureable differences.
gian1983
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2020/09/18 05:31:56
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/14 21:48:12 (permalink)
Cant wait for the kingpin
 
QingFengX
Superclocked Member
  • Total Posts : 107
  • Reward points : 0
  • Joined: 2020/12/05 10:10:51
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/15 04:04:00 (permalink)
I want 3090 kingpin
Stickboy46
Superclocked Member
  • Total Posts : 157
  • Reward points : 0
  • Joined: 2019/07/17 08:16:22
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/15 05:02:22 (permalink)
They should probably remove the 100 post option for elite. It just causes a bunch of junk posts in the forums lol

i7-10700kf @ 5.1
Corsair H150i Elite Capellix
MSI Z490 ACE
8gbx4 G.Skill TridentZ DDR 4000CL15
EVGA 3090 Kingpin
Corsair AX1200i
Lian Li O11 XL Dynamic
sunshineX
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2020/12/15 22:39:54
  • Status: offline
  • Ribbons : 0
Flagged as Spam (4)
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/16 04:10:28 (permalink)
great job
foxrun
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2008/12/02 16:49:38
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/16 18:54:31 (permalink)
Are you guys only having two fans show up in X1?  I cant seem to get it to display all 3.
Stickboy46
Superclocked Member
  • Total Posts : 157
  • Reward points : 0
  • Joined: 2019/07/17 08:16:22
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/16 20:10:19 (permalink)
foxrun
Are you guys only having two fans show up in X1?  I cant seem to get it to display all 3.


I believe it's 2 fan headers. One is the on board fan and the other 3 are linked as one. I don't believe you can control the 3 radiator fans independent

i7-10700kf @ 5.1
Corsair H150i Elite Capellix
MSI Z490 ACE
8gbx4 G.Skill TridentZ DDR 4000CL15
EVGA 3090 Kingpin
Corsair AX1200i
Lian Li O11 XL Dynamic
Stickboy46
Superclocked Member
  • Total Posts : 157
  • Reward points : 0
  • Joined: 2019/07/17 08:16:22
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/16 20:20:29 (permalink)
Just to toss my tidbit of info. My setup is in sig.  Best I could do in my 3090 ftw3 ultra was right at 14000 in PR.  With just about 30 minutes of messing with the kingpin my best PR is right at 15000. This is on the LN2 bios but nothing else besides just playing around in X1.  Maxed power target, 140 core, 1100 memory OC. It holds a solid 2140-2160 boost clock and stays in the 45-48 degree range without any special cooling (no pumping in cold air or anything). I did set it up in a push/pull setup though. 
 
Overall I'm happy with the performance jump from the ftw3 ultra. 

i7-10700kf @ 5.1
Corsair H150i Elite Capellix
MSI Z490 ACE
8gbx4 G.Skill TridentZ DDR 4000CL15
EVGA 3090 Kingpin
Corsair AX1200i
Lian Li O11 XL Dynamic
Cadillac94pimpin
Superclocked Member
  • Total Posts : 182
  • Reward points : 0
  • Joined: 2019/03/26 23:51:35
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/16 22:00:22 (permalink)
Stickboy46
Just to toss my tidbit of info. My setup is in sig.  Best I could do in my 3090 ftw3 ultra was right at 14000 in PR.  With just about 30 minutes of messing with the kingpin my best PR is right at 15000. This is on the LN2 bios but nothing else besides just playing around in X1.  Maxed power target, 140 core, 1100 memory OC. It holds a solid 2140-2160 boost clock and stays in the 45-48 degree range without any special cooling (no pumping in cold air or anything). I did set it up in a push/pull setup though. 
 
Overall I'm happy with the performance jump from the ftw3 ultra. 




Wow that's a solid number for just 30 mins of tinkering, sounds like you got some good silicon! I think I'm going to need a better memory kit if I'm going to put out any kind of decent numbers. I have 3200 CL16. 

i9-9900K
EVGA 3090 KPE (PUSH PULL)
MSI Z390 MEG ACE
32 GB 3200 MHZ
CORSAIR H150i Pro
WD BLACK SN750
SEASONIC 850W Focus Gold+
Lian Li O11D XL + 10x LL120s+3xML 120s
kris1111
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2018/09/07 19:43:42
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/17 09:48:58 (permalink)
doorules
my latest, using cold air
 
http://www.3dmark.com/pr/637981


Could you share your Classified Tool settings?
thegreattonge
New Member
  • Total Posts : 39
  • Reward points : 0
  • Joined: 2019/09/23 15:30:36
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/17 09:51:44 (permalink)
Stickboy46
foxrun
Are you guys only having two fans show up in X1?  I cant seem to get it to display all 3.


I believe it's 2 fan headers. One is the on board fan and the other 3 are linked as one. I don't believe you can control the 3 radiator fans independent



When I connected a second set of fans (3 in daisy) to the cards fan header not only the X1 not show the correct RPMs...it wasn't powering all 6 cards (only 4). Ideally I'd like to not to have to setup a fan curve on the mobo to control fans connected to the GPU AIO
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10159
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/17 13:33:44 (permalink)
Stickboy46
Just to toss my tidbit of info. My setup is in sig.  Best I could do in my 3090 ftw3 ultra was right at 14000 in PR.  With just about 30 minutes of messing with the kingpin my best PR is right at 15000. This is on the LN2 bios but nothing else besides just playing around in X1.  Maxed power target, 140 core, 1100 memory OC. It holds a solid 2140-2160 boost clock and stays in the 45-48 degree range without any special cooling (no pumping in cold air or anything). I did set it up in a push/pull setup though. 
 
Overall I'm happy with the performance jump from the ftw3 ultra. 




+1  Great info

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
GraythaCreek
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2020/12/07 06:35:36
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/17 13:35:40 (permalink)
What's the max core voltage you see in Precision X1 for the Kingpin stock voltage setting when gaming?
foxrun
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2008/12/02 16:49:38
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/17 13:42:09 (permalink)
Where can we download the classified tool?
 
Talon2020
Superclocked Member
  • Total Posts : 229
  • Reward points : 0
  • Joined: 2016/05/26 12:17:13
  • Status: offline
  • Ribbons : 1
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/17 13:42:25 (permalink)
https://www.3dmark.com/3dm/55038954
 
Stock vBIOS. +150 Core, +1400 Mem
 
Haven't mess around with OC, LN2 vBIOS or Classy tools. So far looks like a good chip. 

Associate Code Up to 10% Off Your EVGA Purchase
 
2HQPSRUF10B6HVR
 
i9 12900K | Asus Z690 Hero | EVGA RTX 3090 Ti FTW3 Ultra | 32gb DDR5 6400 CL32 | Samsung 980 Pro | EVGA T2 1600w | LG 27GN950-B 4K 160Hz G-Sync | Alienware AW2721D 1440p 240Hz G-Sync 

doorules
CLASSIFIED Member
  • Total Posts : 4510
  • Reward points : 0
  • Joined: 2007/12/18 02:08:14
  • Location: Newfoundland
  • Status: offline
  • Ribbons : 21
Re: Sightings of the EVGA RTX 3090 Kingpin 2020/12/17 13:46:49 (permalink)
kris1111
doorules
my latest, using cold air
 
http://www.3dmark.com/pr/637981


Could you share your Classified Tool settings?




NVVDC  1.125
FBVDC   1.4
MSVDD  1.2 
changed nothing else for that run
Page: << < ..678910.. > >> Showing page 7 of 59
Jump to:
  • Back to Mobile