mohsh86
New Member
- Total Posts : 59
- Reward points : 0
- Joined: 2009/10/08 00:03:15
- Location: Kuwait
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/08/05 21:45:37
(permalink)
Version:
11.5.0.1207
Important Note: This version of the Intel® Rapid Storage Technology (RAID) has been temporarily removed from our website. Please use version 11.2.0.1006. Please contact Intel® Customer Support for additional information.
i doubt why they did it ? and will there be any issue for the modded bios ?
anyone was able to figure out if trim is going on Raid 0 with this driver/modded BIOS ? or the SSD toolbox optimization tool is working ?
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/08/05 22:18:02
(permalink)
Intel removed the official 11.5.0.1207 due to a memory leak in the service that gets installed with the software. The driver itself works just fine.
|
mohsh86
New Member
- Total Posts : 59
- Reward points : 0
- Joined: 2009/10/08 00:03:15
- Location: Kuwait
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/08/05 22:40:29
(permalink)
is trim supported ? does the SSD toolbox do optimization ?
|
mohsh86
New Member
- Total Posts : 59
- Reward points : 0
- Joined: 2009/10/08 00:03:15
- Location: Kuwait
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/08/06 02:40:44
(permalink)
another n00bies quiestion, anyway to flash the rom without usb ?
am lazy formatting my 16 GB flash drive, and sometimes formatting such large usb flash won't work, is there any .iso of this ?
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/08/06 08:56:56
(permalink)
Sorry, no ISO. I guess I could do it if there is a demand, but you could also just use something like 7-Zip to replace the BIN file inside the original EVGA ISO with the modded one.
|
mohsh86
New Member
- Total Posts : 59
- Reward points : 0
- Joined: 2009/10/08 00:03:15
- Location: Kuwait
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/08/06 09:43:37
(permalink)
I tried both 7-zip and magic iso already, but i couldt replace th bin file as the original bin was not visible..
Anyway i tree he ssd trim in raid 0 supported? And any guide to flash through usb?
|
mohsh86
New Member
- Total Posts : 59
- Reward points : 0
- Joined: 2009/10/08 00:03:15
- Location: Kuwait
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/08/06 15:11:56
(permalink)
i've updated the bios with the new irst rom and installed the new drivers, the crappy windows performance experince index for storage went from 7.8 to 7.9, performance increase confirmed i've also note a slightly fast booting / windows startup, consider the bloated task bar i have still ssd tool box won't run optimization on raid.. wonder if trim is going beneath it by windows it self.. thanks guys ! you rock ! 
|
wackel134
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2009/06/08 23:48:00
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/08/25 14:12:33
(permalink)
I´m gonna upgrade my X58 SLI 3 with some SSD´s soon and because this ,i am very interested in your modded BIOS... sadly those links don´t seem to work for me :-( could you please check them and eventually reup them if possible ?  thx EDIT: HAD TO JOIN GOOGLE DRIVE TO DOWNLOAD DOWNLOAD WORKED FINE 
post edited by wackel134 - 2012/08/25 14:19:57
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 9599
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re:New RAID ROM
2012/08/26 23:01:38
(permalink)
Anyone tried the modded bios for the E758? I'm currently having some issues with my Raid 0 and wants to test to see if a update is what is needed.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/08/28 09:04:53
(permalink)
wackel134
I´m gonna upgrade my X58 SLI 3 with some SSD´s soon and because this ,i am very interested in your modded BIOS... sadly those links don´t seem to work for me :-( could you please check them and eventually reup them if possible ? thx
EDIT: HAD TO JOIN GOOGLE DRIVE TO DOWNLOAD DOWNLOAD WORKED FINE
Glad it worked for you, but you should not have to join Google Drive. It should just let you download without having to be logged in.
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/08/28 09:11:31
(permalink)
z3r0t0l0rence
Anyone tried the modded bios for the E758? I'm currently having some issues with my Raid 0 and wants to test to see if a update is what is needed.
I've been using the modded E757 BIOS without any issues. The rest should be the same. What kind of issues are you having and with which RAID controller? EDIT: Nevermind, I read your other post. I'd say try the updated ROM and see if you get better speeds with your Raptors.
post edited by henryvits - 2012/08/28 09:24:46
|
X-MAN
New Member
- Total Posts : 88
- Reward points : 0
- Joined: 2007/05/29 17:04:03
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/09/01 10:55:33
(permalink)
Has anyone noticed 770 is posted as having JMicron ROM when, in fact, it has Marvell Controller?
Is this just error or really has the wrong Option ROM?
Concerned , but not ungrateful...thanks so much for this...anxious to try!
|
sedril
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2007/04/28 13:46:59
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/09/01 12:33:55
(permalink)
I had the same concern a while back about the 768 for the same reason, and I was told the Jmicron is the actual IDE controller...
Not sure if that's accurate or not, but that is what I was told, and for the record, I've been using these modded OROM bios's for a while now and everything is flawless for me... (knocks on wood)...
I use my onboard RAID heavily on this board with 4 1tb western digital drives in raid 0 for storage, and 2 vertex 3 drives for the system... Works like a charm...
Asus Maximus ROG XI Apex I9 9900k 5.1Ghz 16GB G.skill DDR4 4133 Samsung 970 Pro 512GB EVGA GTX 2080 Super FTW3 HydroCopper 8GB Watercooled CPU & GPU two separate loops with triple radiators
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/09/02 11:06:34
(permalink)
For some reason, EVGA decided to include the JMicron RAID ROM with every X58 BIOS, whether the board has the controller or not. It is not being loaded if the board doesn't actually have it.
As far as the Marvell RAID ROMs, they have to be flashed externally, and not as part of the BIOS. I'm sure you guys are already aware of this.
|
Arctucas
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2007/05/20 15:35:18
- Status: offline
Re:New RAID ROM
2012/10/08 14:00:13
(permalink)
MB: eVGA Z170 Classified K CPU: i7-6700K RAM: G.Skill F4-3600C16D-16GTZ GPU: eVGA GTX970SSC HDD: 4xSamsung 830 RAID 0 PSU: Corsair AX1200 Cooling: D5, PA140.3, XSPC dual bay res, HK 3.0
|
dmoheban
FTW Member
- Total Posts : 1506
- Reward points : 0
- Joined: 2003/07/08 15:35:10
- Status: offline
- Ribbons : 3
Re:New RAID ROM
2012/10/08 14:02:05
(permalink)
FYI folks this is a beta rom and no trim support. Some have reported better performance though. I would wait til the 1724s come out..
Associate Code: K8XL098LGS5O4WZ
|
dmoheban
FTW Member
- Total Posts : 1506
- Reward points : 0
- Joined: 2003/07/08 15:35:10
- Status: offline
- Ribbons : 3
Re:New RAID ROM
2012/10/08 14:41:20
(permalink)
@henryvits, I was wondering when you mod the bios file your using cbrom.exe and was wondering do you first release the old pci rom raid file and then add the new one with the same 8086-2822_ prefix infront of the rom version? Does what order the module is matter? Thanks. Edit: I tried my hand at it and first just added the file 8086_2822_v11601624.bin but the position in the bios dump had changed down one slot. So I started over and released the rtegpxe and then released the 8086-2822_v115XXXXX.bin then added the new 8086-2822_v116XXXXX.bin file followed by the rtegpxe file such that the order listed is the same as before. Did I do that right? Thanks
post edited by dmoheban - 2012/10/08 14:55:18
Associate Code: K8XL098LGS5O4WZ
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/10/08 17:18:17
(permalink)
Hey guys, I will upload modded BIOSes with the new RAID ROM as well as a new Realtek PXE ROM tomorrow morning when I'm at work. I've already modded my LE board, and it works fine. @dmoheban No need to release existing modules first. I simply replace the existing modules with "cbrom [BIOS name] /pci [module name]". The order of the modules shown with "cbrom /d" is irrelevant. The last one you update will always be at the bottom of the list, but what's important is that the letters A, B, and C still correspond to the correct modules. CBROM does that automatically. Also, the name of the module does not matter at all. It does not have to be the same as the previous one.
post edited by henryvits - 2012/10/08 17:21:02
|
dmoheban
FTW Member
- Total Posts : 1506
- Reward points : 0
- Joined: 2003/07/08 15:35:10
- Status: offline
- Ribbons : 3
Re:New RAID ROM
2012/10/08 17:24:11
(permalink)
henryvits
Hey guys,
I will upload modded BIOSes with the new RAID ROM as well as a new Realtek PXE ROM tomorrow morning when I'm at work. I've already modded my LE board, and it works fine.
@dmoheban
I simply replace the existing modules with "cbrom [BIOS name] /pci [module name]". The order of the modules shown with "cbrom /d" is irrelevant. The last one you update will always be at the bottom of the list, but what's important is that the letters A, B, and C still correspond to the correct modules. CBROM does that automatically.
Oh I see. Ok but you still have to rename the raid rom file? About the PCI list order I guess my OCD was acting up. Still I'm too chicken sht to try flashing my own mod. Will wait for 11.6.0.1724 with trim support first before I take the risk.. Thanks!
Associate Code: K8XL098LGS5O4WZ
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/10/08 17:56:10
(permalink)
See my edited post in regards to the renaming. Don't get your hopes up for TRIM support in anything older than 7-series chipsets. Intel doesn't seem to care much about us "legacy" users 
|
dmoheban
FTW Member
- Total Posts : 1506
- Reward points : 0
- Joined: 2003/07/08 15:35:10
- Status: offline
- Ribbons : 3
Re:New RAID ROM
2012/10/08 17:59:39
(permalink)
henryvits
See my edited post in regards to the renaming. Don't get your hopes up for TRIM support in anything older than 7-series chipsets. Intel doesn't seem to care much about us "legacy" users
Thanks for the bios modding tips. About the Trim support I've read on Overclock.net that its coming to older chipsets soon maybe. Its a big Maybe. Rumor is that the 11.6.1.XXXX roms will bring it. I don't have my hopes up though it would be awesome if it did!
Associate Code: K8XL098LGS5O4WZ
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/10/09 09:16:48
(permalink)
|
Arctucas
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2007/05/20 15:35:18
- Status: offline
Re:New RAID ROM
2012/10/09 13:42:28
(permalink)
henryvits
Updated original post (http://forums.evga.com/fb.ashx?m=1605686) with links to modded BIOSes containing latest Intel RAID ROM 11.6.0.1624 as well as latest Realtek PXE ROM 2.50.
Thank you. Your work, as always, is greatly appreciated.
MB: eVGA Z170 Classified K CPU: i7-6700K RAM: G.Skill F4-3600C16D-16GTZ GPU: eVGA GTX970SSC HDD: 4xSamsung 830 RAID 0 PSU: Corsair AX1200 Cooling: D5, PA140.3, XSPC dual bay res, HK 3.0
|
mitymaus
New Member
- Total Posts : 49
- Reward points : 0
- Joined: 2008/11/02 23:29:22
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/10/11 02:25:24
(permalink)
EVGA 141-BL-E759 * I7-970@ 4.3ghz * Mushkin Redline Ridgeback 999000-6x4gb@ 1650mhz * 3x240gb OCZ Vertex 2-raid 0 * 2tb Hitachi DeskStar * 1x EVGA 580GTX * HP ZR30w * Silverstone 1500 * HP Blackbird 002-slightly modified. 
|
henryvits
Superclocked Member
- Total Posts : 141
- Reward points : 0
- Joined: 2008/03/21 13:25:46
- Location: Long Beach, CA
- Status: offline
- Ribbons : 1
Re:New RAID ROM
2012/10/15 10:54:17
(permalink)
|
Scorpion-X
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2005/12/04 12:40:36
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/10/15 11:45:58
(permalink)
Seriously henryvits you rock!!! Thanks a million!!! Going to try it on all 3 of my X58 boards the E759 E760 and E770 and post back if any problems!!! Thanks again!!!
Processor: Intel i7-5930k @ 4500Mhz on Water Mobo: ASUS Rampage V Extreme BIOS 3504 Memory: Kingston HyperX Predator 16GB 3000MHz 4x4GB 14-15-15-37-1T Video: 2x in SLI EVGA GeForce GTX 1080 Ti FTW3 @ 2000/12000 On Air Audio: Onboard SupremeFX SSD: (OS): Samsung 960 EVO NVMe 500GB - SSD (Games): Samsung 850 Pro 1TB PSU: Corsair AX1200i Case: Coorsair Obsidian 750D Keyboard: Logitech G19s - Mouse: Logitech G502 Operating System: Windows 10 Pro x64-bit Monitor: Acer Predator XB271HU 27" 144/165Hz G-Sync IPS 1 of many many custom built systems... System Builder/Engineer/IT Professional
|
dmoheban
FTW Member
- Total Posts : 1506
- Reward points : 0
- Joined: 2003/07/08 15:35:10
- Status: offline
- Ribbons : 3
Re:New RAID ROM
2012/10/15 16:06:54
(permalink)
Can some one test for Trim support?
I would but don't know how..
Thanks Henry!
Associate Code: K8XL098LGS5O4WZ
|
Arctucas
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2007/05/20 15:35:18
- Status: offline
Re:New RAID ROM
2012/10/16 13:32:53
(permalink)
MB: eVGA Z170 Classified K CPU: i7-6700K RAM: G.Skill F4-3600C16D-16GTZ GPU: eVGA GTX970SSC HDD: 4xSamsung 830 RAID 0 PSU: Corsair AX1200 Cooling: D5, PA140.3, XSPC dual bay res, HK 3.0
|
dmoheban
FTW Member
- Total Posts : 1506
- Reward points : 0
- Joined: 2003/07/08 15:35:10
- Status: offline
- Ribbons : 3
Re:New RAID ROM
2012/10/17 10:33:11
(permalink)
Someone already tested for Trim on Z68 and that was negative.. so guess I'll pass on this orom upgrade until 11.6.1.XXXX is released..
Thanks.
Associate Code: K8XL098LGS5O4WZ
|
wrigleyvillain
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2006/07/20 07:38:22
- Status: offline
- Ribbons : 0
Re:New RAID ROM
2012/10/18 12:50:01
(permalink)
Any chance this could be done for P55 FTW (E657)? Some guy wanted to do so in the thread below but could not open the bios file in MMTOOL?
Thanks
(Oh can't post links yet it's m=1530297)
|