So EVGA time to lower the price of these now don't you think? No reason to pay the premium over the 4gb FTW for a couple reasons off the top of my head
 
1) The card now looks terrible where the plug should be
2) no voltage controls 

 
 
Hell sell the plug separately and make it a plug n play or simple solder. 

Well I wouldn't doubt his heat issues ... I would expect any 4-way air cooled setup to have major heating issues sans Classifieds with an unlocked fan speed.

ok well i can see this sucking for the classy owners and I do agree that not having unlocked voltages to begin with sucks. But... For me I really dont think its that huge of a deal... I mean i can still have the enjoyment with fiddling with overclocking via prescison, and i really dont think i could go any higher with more volts anyway because my cards would be running to warm. I run about 1250 on my 670's to me thats great. I have never had cards that have o/c this well. Heck i had a asus 5870v2 that was built like a tank and it litterally couldnt get over 20mhz even with volts. so ya... to each there own.

em2jeff

the classies do not have the top binned gpus, this is what i was getting at

i have 3 of them buddy, not one of them hitting 1300mhz or even 1270.. you call that top bin? you don't know kepler. and believe me i'm not the only one with disappointing results.

heat issues on the FTW? ya if you're running 4, duh?

the classified is completely POINTLESS now, out of the box clocks only matter to the brain dead

what really matters is how far you can push the chip on these locked voltages, and until EVGA actually does some binning and put's the better chips in the classies, then they will continue to be POINTLESS.

 
Duh? 4-way SLI is a supported setup for any GTX 680. So why should the GTX 680 FTW be any different? My Classifieds in 4-way run a solid 10-15C cooler. I also did not have any issues with 4-way reference GTX 680s with heat. So why should I have heat issues with the FTW? Because they're sub-optimal.
 
Yes, they're top binned. That's an EVGA fact. I'm sorry that the cards that you purchased have not met your overclocking expectations - but, as you probably know (as an experienced overclocker) - your results may vary.
 
I don't know Kepler? LOL. I have 7 GTX 680s here in the house and a GTX 690 just showed up today. I think I have some significant experience. :) I've been running 4-way Kepler since launch. Reference -> FTW 4GB (for a couple weeks) -> Classified.
 
I don't understand why you're trolling so hard here. The Classifieds are $30 more than the FTW 4GB. If you don't find that to be worth it without EVBot - fine. I'm just pointing out that in my opinion it is worth $30 more for the better cooler and better OC results (that I have experienced).

i told this 06/30/2012!!!!!!!!!!!!!!!!!!!! but no one listen ... :) NVIDIA strictly prohibited voltage control! period!
 
http://hwbot.org/forum/showpost.php?p=183379&postcount=16

This is terribly disappointing on NVidia's end. As ManiacVVV said, this is unadulterated greed at play here.
 
I bet a properly OC'd Classified (1300+mhz) will rival NVidia's next GPU and that is why they are paranoid about this in addition to the ridiculous "noise" limit. I bet that is so that they can claim the next GPU model will have "better" cooling.
 
For those with Classifieds that do not have the EVBot plug, I highly suggest flashing the BIOS that unlocks the fan and increases the voltage limit to a modest 1.212V.
 
I am able to hit 1300Mhz across all four Classified GPUs without any effort (software only, no EVBot) and it is rock solid. I get 70 - 95 FPS in BF3 @ 4800x2560 with all settings on Ultra except for MSAA (using InjectFXAA instead of MSAA).
 
On that note, when are the new series of GPUs coming out? Next March or sooner?

Tombi

What will be happen on RMA with an "EVGA GTX 680 CLASSIFIED" with (!) EVBot-Connector ?

I assume they will have to give you one with a connector since when you bought it that is how it was advertised. I'm sure they have a stock of them for RMA still but just don't ship them. 

I guess I would be quite disappointed in the GK110 cards if they have to hamper the GK104's to keep separation between them. Maybe this 104 chip is just that beastly. Time will tell us.
 
A pretty low blow on nVidia's part for sure. They must think we consumers are quite a bunch of idiots and can't see their greedy ways. I agree the noise limit is stupid as well. That bothers me as much as seat belt laws. I should be allowed to determine how loud my PC is just like I should be allowed to determine whether or not I wear something that affects only me.
 
As far as when the 700's will be out it's probably pretty hard to say. When is AMD going to put any pressure on them? nVidia is only going to go slower and slower and be more and more controlling until AMD lands a haymaker with a future generation. I'm crossing my fingers big time that this happens with the 8000 series AMD cards. nVidia is getting too comfortable and greedy.

BioHazardSperm

Cloudz00x

Durzel

Don't understand why people would level blame at EVGA at this.  Ultimately it will only hurt sales, it wouldn't ever help so it's counter-intuitive to assume they had any culpability in the decision.

No it's not Evga's fault nor do I blame them... but since the port was offered and fabricated by EVGA, it is in-turn there product and with the recent change leaves there customers up in the air. Again questions need to be answered on Evga's part.

1. For individuals who purchased Legacy Classifieds GTX 680 with the Evbot, will technical and Customer Support still be available?

2. For individuals who purchased Legacy Classifieds GTX 680 and send the card in the future for an RMA, will they get the exact card back or will there be the probability of getting one of these new cards.

3. For individuals who purchased Extended Warranties for Legacy Classifieds GTX 680 will it be covered? Basically same question as #2. If not, a refund is in order, since the warranty is unique to that particular card not the new ones with the ports removed.

4. If overclocking the voltage since that is still applicable to the Legacy Classified GTX 680, will it void the warranty or no?

These things need to be answered, so that way the community who did purchase this card can have some information, plan accordingly and/or have a peace of mind. Paying that much money just to be told, there's no more support/technical help, rma, or warranty on these cards would be horrible to hear. Hope Evga does the right thing.

Sorry but that's a bit over dramatized holy cow
1. Yes
2. Performance is the RMA key word ,since they can not make more chances are high you would get a non-port Classy that performs as well as the Specs advertised (overclocking ability  is not or has it ever been a factor in RMA)
3. Warranties just dont go away of course its covered,and the warranty is NO different then any other card not sure wth your talking about .
4.Jacob already covered this ,yes the card warranty is covered same as #3 you just asked

Yes it sucks but guess what EVGA has to do what Nvidia wants in this particular case .

 
For question number 3, in-regards to extended warranty. Individuals purchase the extended warranty to cover the exact card. Since Evga makes us purchase extended warranties for each card, that makes the card unique. I purchased the extended warranty for that exact purpose, to be able to get a replacement/RMA for my exact card with the evbot port.
If your saying since they wont be in production and HIGH chance we will get a non-port classy. I'd like to speak to some sort of rep to either get a refund on my extended warranty purchase. Since this clearly was a change after I purchased it. Regardless of all the other ncie features, the EvBot port was the deal sealer since Classifieds were sold and meant to be OverClocked in all aspects.

mike211
I love my Super air cooled 4-Way SLI 680 Classifieds.
Thanks evga

Hey - nice rig. :)
 

http://1pcent.com/?p=123

I can't speak for Matt but EVGA rises to the occasion more than any other NVIDIA partner when it comes to your RMA. You're in very good hands.

BioHazardSperm

Cloudz00x

BioHazardSperm

Cloudz00x

Durzel

Don't understand why people would level blame at EVGA at this.  Ultimately it will only hurt sales, it wouldn't ever help so it's counter-intuitive to assume they had any culpability in the decision.

No it's not Evga's fault nor do I blame them... but since the port was offered and fabricated by EVGA, it is in-turn there product and with the recent change leaves there customers up in the air. Again questions need to be answered on Evga's part.

1. For individuals who purchased Legacy Classifieds GTX 680 with the Evbot, will technical and Customer Support still be available?

2. For individuals who purchased Legacy Classifieds GTX 680 and send the card in the future for an RMA, will they get the exact card back or will there be the probability of getting one of these new cards.

3. For individuals who purchased Extended Warranties for Legacy Classifieds GTX 680 will it be covered? Basically same question as #2. If not, a refund is in order, since the warranty is unique to that particular card not the new ones with the ports removed.

4. If overclocking the voltage since that is still applicable to the Legacy Classified GTX 680, will it void the warranty or no?

These things need to be answered, so that way the community who did purchase this card can have some information, plan accordingly and/or have a peace of mind. Paying that much money just to be told, there's no more support/technical help, rma, or warranty on these cards would be horrible to hear. Hope Evga does the right thing.

Sorry but that's a bit over dramatized holy cow
1. Yes
2. Performance is the RMA key word ,since they can not make more chances are high you would get a non-port Classy that performs as well as the Specs advertised (overclocking ability  is not or has it ever been a factor in RMA)
3. Warranties just dont go away of course its covered,and the warranty is NO different then any other card not sure wth your talking about .
4.Jacob already covered this ,yes the card warranty is covered same as #3 you just asked

Yes it sucks but guess what EVGA has to do what Nvidia wants in this particular case .

For question number 3, in-regards to extended warranty. Individuals purchase the extended warranty to cover the exact card. Since Evga makes us purchase extended warranties for each card, that makes the card unique. I purchased the extended warranty for that exact purpose, to be able to get a replacement/RMA for my exact card with the evbot port.
If your saying since they wont be in production and HIGH chance we will get a non-port classy. I'd like to speak to some sort of rep to either get a refund on my extended warranty purchase. Since this clearly was a change after I purchased it. Regardless of all the other ncie features, the EvBot port was the deal sealer since Classifieds were sold and meant to be OverClocked in all aspects.

That is incorrect ,the warranty is the SAME as any other you are NOT promised the EXACT same card only the EXACT or better Performance .Your confused

Replacement and Refund:

• Products sent in for RMA will be repaired or replaced with a product deemed to be of equal or greater performance by EVGA if an exact replacement is not available.
• EVGA Warranty begins from the date the product is shipped from the EVGA warehouse.
  • For the original owner of the product with a valid invoice that can be verified from an approved reseller the warranty begins from the date of purchase on the invoice.
• EVGA only offers refunds on products purchased directly from EVGA.com within 30 days of purchase and are subject to a 15% restocking fee.
  • For products not purchased at EVGA.com, refund claims must be processed through the original vendor's return policy.
• All products returned from EVGA's RMA department are thoroughly tested recertified products. If an RMA is necessary within 30 days of the original purchase date, a new in box OEM replacement will be sent in return if the product was purchased new-in-box, subject to availability. All recertified purchases will receive a recertified product for replacement.
• Replacements under EVGA's RMA Service will continue the original product's warranty based on the original warranty start date.

The warranty is the same for ANY card sold ,also note this as when you bought it this was made clear

All Extended Warranty purchases are non-refundable. The option to purchase will be available at the time of registration if registration is completed within 30 days of purchase.

 
Ah, I should read fine print more. Your right!

We should track which cards people get from which retailer that still have the EVBot connector. My Classified I got from Newegg a month and a half ago overclocks to 1430 MHz at 1.35v air cooled, so I want another EVBot card for SLI. I figure my greatest chance would be with Newegg since they had 71 in stock as of when I ordered today.
 
I ruled out EVGA's store as most likely they pulled the EVbBot connector ones for future RMA's and are only shipping the connector-less. I could  have went with Amazon but I have a feeling they may have the newer non-Evbot ones too. Cost me an extra $45 though to go with Newegg as Newegg does not have the $30 off coupon and they charge for shipping unlike Amazon who has the $30 off coupon and also ships for free (Prime). I will let you guys know if my Newegg card has it or not. If it doesn't have the plug, it's going back as defective and I'll try Amazon. 

I didn't see this one coming, hopefully you overclocking gurus will be able to get a modded BIOS (or mod if yourself) if you don't care about your warranty.  /insert Linus Torvalds' infamous comment toward NVIDIA.

boredgunner

I didn't see this one coming, hopefully you overclocking gurus will be able to get a modded BIOS (or mod if yourself) if you don't care about your warranty.  /insert Linus Torvalds' infamous comment toward NVIDIA.

 
According to TIN, you can solder/short the current sensor resistors together and this will allow you to bypass any power limits. But your warranty is good as gone.  Also, there is still a problem with the voltage control.  Even if someone were to do this on the neutered Classified, you would still need some sort of software to control it.