Nereus
Captain Goodvibes
- Total Posts : 18917
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: New 3DMark DX12 RT benchmark results
2020/11/19 11:49:37
(permalink)
and here it is without any load but with boost lock on... just to show it does actually clock up lol 
post edited by Nereus - 2020/11/19 16:24:44
Attached Image(s)
|
xxDarkxx
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2020/11/02 07:51:26
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/19 12:06:07
(permalink)
furmark is like a gpu virus so its intentionally programed not to run max clocks. This is normal and will apply to everyone even if you used LN2 while running the stress test also, thank you for using boost lock to show us your clocks! this gives a good indication of what your card is packing. Nice card you got there I have to say though, at your current settings you are getting 1,950Mhz with +0 core. Your clocks are not bad! i would say it's normal and generally on the good side that theoretically you can reach 2,100Mhz because many cards do not. But the card isnt a lottery winner either. The best you can do is get better cooling because it seems to be a tad toasty. is 44c idle? would you consider investing in a waterblock? it will make a big difference for your card in particular
post edited by xxDarkxx - 2020/11/19 12:16:00
|
Nereus
Captain Goodvibes
- Total Posts : 18917
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: New 3DMark DX12 RT benchmark results
2020/11/19 12:20:19
(permalink)
xxDarkxx
furmark is like a gpu virus so its intentionally programed not to run max clocks. This is normal and will apply to everyone even if you used LN2 while running the stress test
also, thank you for using boost lock to show us your clocks! this gives a good indication of what your card is packing. Nice card you got there
I have to say though, at your current settings you are getting 1,950Mhz with +0 core.
Your clocks are not bad! i would say it's normal and generally on the good side that theoretically you can reach 2,100Mhz because many cards do not. But the card isnt a lottery winner either. The best you can do is get better cooling because it seems to be a tad toasty. is 44c idle? would you consider investing in a waterblock? it will make a big difference for your card in particular
Ahh ok thanks. Yes that was idle temp (but boost lock) with 100% fans, and I also have power management mode inside the nvcp set to max performance globally as an effort to stop the brief black screens.. it didn't work apparently. I have everything ready to install a full CPU+GPU loop with 2 x 280mm radiators, just waiting to find a GPU block somewhere that doesn't cost $400 lol. I just had another extremely brief black screen while checking my email, nothing else open but browser. This time it was just a flicker though, and I heard the fans start to spin up for a moment too. Damn. I've had a few of them now, some up to 5-10 seconds long.
post edited by Nereus - 2020/11/19 12:31:58
|
xxDarkxx
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2020/11/02 07:51:26
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/19 12:32:37
(permalink)
when i opened up the backplate i saw the thermal pads were only covering 1/3rd of the area that they are supposed to  I immediately replaced the pads and saw better temps and less issues. You will benefit a lot once you have your loop set up! Since it involves you taking apart your card and changing out the thermal paste (for a better one) wiping off the terrible putty and replacing it with a superior pads, getting better contact because you will be hand installing the block, ext. all of these will benefit you and what you will find is that you will get less random black screens and general hiccups Also, you will notice after doing the above mentioned things, that even at the same temperature your clocks will be better because there will be less leakage from your gpu! I'm still waiting for my block but its getting tiresome as my setup has been ready for a while now  and the company just delayed it some more
|
Nereus
Captain Goodvibes
- Total Posts : 18917
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
|
xxDarkxx
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2020/11/02 07:51:26
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/19 12:59:08
(permalink)
yes i was considering asking for a refund. I'm sure the performance is phenomenal but they took money a full month in advance and still havent delivered on the product. For the ridiculous price of that block they shouldnt be late
|
Nereus
Captain Goodvibes
- Total Posts : 18917
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
|
blaise
iCX Member
- Total Posts : 291
- Reward points : 0
- Joined: 2009/03/10 21:48:56
- Location: Sydney, Australia
- Status: offline
- Ribbons : 5
Re: New 3DMark DX12 RT benchmark results
2020/11/19 21:11:43
(permalink)
RTX 3090 FTW3 Ultra 55.37 fps Blai5e default run (on air until a w/block can be sourced) new run further down Installed in one of those new EKBW vertical GPU holders which is impressively sturdy (with plenty of room to breathe well away from the Phanteks 719 T/G side panel) but was a bugger to fit as I have a Phanteks D140 distro plate to contend with but I managed.
post edited by blaise - 2020/11/20 13:52:39
|
Dyezak
Superclocked Member
- Total Posts : 107
- Reward points : 0
- Joined: 2020/10/10 16:06:18
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/20 06:24:59
(permalink)
RTX 3080 FTW3 Ultra - 51.19 www..3dmark.com/dxr/20101 XOC Bios, slight unoptimized overclock applied, air cooled, waiting for EKWB to make a block for this thing. And for some reason, this forum is preventing me from posting a link....
post edited by Dyezak - 2020/11/20 06:28:39
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: New 3DMark DX12 RT benchmark results
2020/11/20 06:51:14
(permalink)
Dyezak
RTX 3080 FTW3 Ultra - 51.19
www..3dmark.com/dxr/20101
XOC Bios, slight unoptimized overclock applied, air cooled, waiting for EKWB to make a block for this thing. And for some reason, this forum is preventing me from posting a link....
You have to have 10 posts before you can add a link, you have 8 currently so your about there.
|
blaise
iCX Member
- Total Posts : 291
- Reward points : 0
- Joined: 2009/03/10 21:48:56
- Location: Sydney, Australia
- Status: offline
- Ribbons : 5
Re: New 3DMark DX12 RT benchmark results
2020/11/20 13:48:28
(permalink)
|
laydback
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/10/13 08:35:04
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/22 22:26:32
(permalink)
3080 FTW3 Ultra 50.91
3dmark.com /dxr /21957
|
gonsa
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2007/12/15 09:04:11
- Location: Lisbon
- Status: offline
- Ribbons : 1
Re: New 3DMark DX12 RT benchmark results
2020/11/23 06:11:04
(permalink)
Case: Lian Li OD 11 | Mobo: MSI MAG X570 Tomahawk Wifi | CPU: AMD 3700X | Memory: G.Skill Trident Z Neo 32 GB DDR4-3600 CL16 | Graphics Card: EVGA 3080 FTW3 Ultra | SSD: Samsung 970 Evo 1 TB M.2-2280 NVME | Samsung 860 Evo 500 GB | PSU: SuperNOVA G2 1000W | Sound Speakers: Creative Inspire T3100 | Mouse: Logitech G903 | Monitor: LG 34GN850-B 34.0" 3440x1440 144 Hz
|
jenkeeez
Superclocked Member
- Total Posts : 117
- Reward points : 0
- Joined: 2020/11/23 10:59:34
- Location: FLORIDA
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/23 15:20:02
(permalink)
|
blaise
iCX Member
- Total Posts : 291
- Reward points : 0
- Joined: 2009/03/10 21:48:56
- Location: Sydney, Australia
- Status: offline
- Ribbons : 5
Re: New 3DMark DX12 RT benchmark results
2020/11/23 17:07:40
(permalink)
jenkeeez
any 3090 strix results ?
Maybe look on an ASUS site, you realise you're typing into an EVGA forum 
|
TheHyperMatrix
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2012/03/22 18:56:05
- Location: evga.com checkout screen
- Status: offline
- Ribbons : 1
Re: New 3DMark DX12 RT benchmark results
2020/11/23 17:18:14
(permalink)
jenkeeez
any 3090 strix results ?
Just sold my 3090 Strix yesterday but best I could get was 60.91fps.
Need to spamtribute 100 posts for Elite status to be able to get a KingPin because Jacob. My apologies in advance.
|
R6acer
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/09/23 13:30:20
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/25 21:03:21
(permalink)
|
jenkeeez
Superclocked Member
- Total Posts : 117
- Reward points : 0
- Joined: 2020/11/23 10:59:34
- Location: FLORIDA
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/26 03:01:26
(permalink)
TheHyperMatrix
jenkeeez
any 3090 strix results ?
Just sold my 3090 Strix yesterday but best I could get was 60.91fps.
Thanks
|
Thorissr
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 2020/11/20 07:09:52
- Status: offline
- Ribbons : 1
Re: New 3DMark DX12 RT benchmark results
2020/11/26 10:55:31
(permalink)
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: New 3DMark DX12 RT benchmark results
2020/11/28 05:54:23
(permalink)
|
dragomirc
SSC Member
- Total Posts : 760
- Reward points : 0
- Joined: 2006/08/14 20:40:01
- Location: Rochester, US
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/28 07:15:18
(permalink)
|
kelkel1
SSC Member
- Total Posts : 601
- Reward points : 0
- Joined: 2019/05/18 09:52:47
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/11/28 12:01:39
(permalink)
|
SoldierRBT
Superclocked Member
- Total Posts : 109
- Reward points : 0
- Joined: 2011/01/06 12:12:06
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/12/01 19:09:36
(permalink)
|
S.Shooter
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2011/05/13 09:40:29
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/12/02 09:22:45
(permalink)
Just got my 3080 Black.
44.24fps
/ dxr / 27616
That said - i'm getting REALLY bad benchmarks results.
Timespy graphics score: 15 363
Time Spy Extreme Graphics score: 8 118
Fire strike Ultra Graphic score: 10 474
Port Royal: 10 910
Have i7 8700, 16GB 3200 RAM, Asus Rog z370-h Gaming with latest BIOS.
Driver 457.30
Also GPU-Z reports the card is running in PCIe x8 3.0 - tried to set everything to GEN3 to no avail.
What's going on? Anyone? I'm going nuts here!
| i7 8700 | Noctua NH-u14s | Asus ROG z370-h | 16GB ram | EVGA RTX 3080 Black | Fractal Design Newton R3 800w | 3x BenQ XL2420T 120hz + 3D Vision gen 2| Win10 x64 | Sennheiser HD 598 |
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: New 3DMark DX12 RT benchmark results
2020/12/03 02:25:20
(permalink)
S.Shooter
Just got my 3080 Black.
44.24fps
/ dxr / 27616
That said - i'm getting REALLY bad benchmarks results.
Timespy graphics score: 15 363
Time Spy Extreme Graphics score: 8 118
Fire strike Ultra Graphic score: 10 474
Port Royal: 10 910
Have i7 8700, 16GB 3200 RAM, Asus Rog z370-h Gaming with latest BIOS.
Driver 457.30
Also GPU-Z reports the card is running in PCIe x8 3.0 - tried to set everything to GEN3 to no avail.
What's going on? Anyone? I'm going nuts here!
Yeah you're needing that to be pcie 3.0 x16 for sure. When you click the rendering test in gpuz does it bump up to x16 or stay at x8?
|
S.Shooter
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2011/05/13 09:40:29
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/12/03 07:55:22
(permalink)
sparetimepc
Yeah you're needing that to be pcie 3.0 x16 for sure. When you click the rendering test in gpuz does it bump up to x16 or stay at x8?
Where do i find the render test? I have v2.36.0
| i7 8700 | Noctua NH-u14s | Asus ROG z370-h | 16GB ram | EVGA RTX 3080 Black | Fractal Design Newton R3 800w | 3x BenQ XL2420T 120hz + 3D Vision gen 2| Win10 x64 | Sennheiser HD 598 |
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: New 3DMark DX12 RT benchmark results
2020/12/03 08:12:52
(permalink)
S.Shooter
sparetimepc
Yeah you're needing that to be pcie 3.0 x16 for sure. When you click the rendering test in gpuz does it bump up to x16 or stay at x8?
Where do i find the render test? I have v2.36.0
The rendering test is right on the gpuz home screen. Click the little question mark beside the pcie bus speed part
|
S.Shooter
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2011/05/13 09:40:29
- Status: offline
- Ribbons : 0
Re: New 3DMark DX12 RT benchmark results
2020/12/03 08:20:28
(permalink)
sparetimepc
z home screen. Click the little question mark beside the pcie bus speed part
LOL the only place i didn't check. No it stays x8
| i7 8700 | Noctua NH-u14s | Asus ROG z370-h | 16GB ram | EVGA RTX 3080 Black | Fractal Design Newton R3 800w | 3x BenQ XL2420T 120hz + 3D Vision gen 2| Win10 x64 | Sennheiser HD 598 |
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: New 3DMark DX12 RT benchmark results
2020/12/03 08:47:02
(permalink)
Can you put your other gpu in and see what it does, that will tell you slot right there.
|
Nereus
Captain Goodvibes
- Total Posts : 18917
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: New 3DMark DX12 RT benchmark results
2020/12/05 22:27:54
(permalink)
DAMMIT!! Civ V just crashed again after about 30 minutes of play. No NVDX... error, just shut itself down and I'm back at the desktop with Steam open.
I think it's RMA time come Monday.
|