enewt

dng25

enewt

Noxnoctis1976
Here is my info for the list '
11/20/2020 6:00:48 AM PT

I've added you.  We should be current as of 1:20 pm PT Monday, 11/23 (once the "Approval Pending" clears).  Good luck everybody!

Why not just create a google excel sheet so a mod doesn't have to approve it every time 

I am putting the final touches on it.  Should be ready in about 10 minutes.

enewt
To make everything easier for folks, here is a link to the queue.  I will also add this to the original post.  Thanks for your patience as I figured out how to do this.  
 
https://docs.google.com/spreadsheets/d/1ySCIHsoe8LmYweVTDT-edV8ovrb0cQjGF4FKtsx_nzE/edit?usp=sharing
 
Good luck this week.  
 

Jarmel

ejaworsk
no confirmed emails sent out today?

I doubt anything is shipping out this week. That notice on the store talking about EVGA being off for the holidays makes me think this will just be a short week for them and they'll really be in full gear next week.

NICROD

JZegers
Maybe wednesday:
 
https://twitter.com/LukeE...us/1330933309308801027

fragility_V1

creekthagray
ok looks like Wednesday is the first emails if all goes to plan. https://twitter.com/LukeE...us/1330933309308801027
 looks like I am late to the party.

Thanks for sharing the news. Thats awesome to hear they are being released soon. I remember KP saying that he was also sending some out to top OC'ers so this holidays 3DMark leaderboards will be active.

w00t!  Looks like the first batch was around 100 cards (at least from those active on the forums), wonder what percentage of that is going out.

I bet we get at least a dozen, although 24 would be great to see that would knock out 25% of the list.

jspataro99

JZegers
I have a 360 rad for my CPU venting out the top of my Phanteks Evolv X already.  Should be fine with the KP front mounted intake rad ya?  Or any suggestions?

That sounds like a solid setup to me. There are people who would say that radiator fans should always be setup as intake fans to avoid blowing warm air over the radiator, but almost all case designs that I have seen suggest using the front and bottom as intake while using the top and back of the case as exhaust since heat rises. Otherwise your case fills up with lots of hot air quickly, and too much static pressure is created which may prevent air from recirculating quickly enough.

I’ll be using essentially the same setup as yours with just the CPU and GPU rads swapped.

enewt

jspataro99

JZegers
I have a 360 rad for my CPU venting out the top of my Phanteks Evolv X already.  Should be fine with the KP front mounted intake rad ya?  Or any suggestions?

That sounds like a solid setup to me. There are people who would say that radiator fans should always be setup as intake fans to avoid blowing warm air over the radiator, but almost all case designs that I have seen suggest using the front and bottom as intake while using the top and back of the case as exhaust since heat rises. Otherwise your case fills up with lots of hot air quickly, and too much static pressure is created which may prevent air from recirculating quickly enough.

I’ll be using essentially the same setup as yours with just the CPU and GPU rads swapped.

If I had a KP, I would do it the same way: CPU rad on top exhaust and GPU rad in front (intake).  My only question is if a GPU is likely to run a little hotter than the CPU, would it make any material difference for the CPU rad to be on the intake and the GPU RAD exhausting out the top?  I've never tested this...but then again I've never had a GPU the quality of a KP....

alpharius194
anyone know if we can use different fans or if we'll need to throw halos on the EVGA ones?