Narune
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2010/11/04 10:49:53
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 10:52:51
(permalink)
|
FCooley
New Member
- Total Posts : 72
- Reward points : 0
- Joined: 2003/12/31 17:27:15
- Status: offline
- Ribbons : 1
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 10:56:47
(permalink)
I only see two pcie 8-pin connectors on that PSU. You will either have to get the XC3 or upgrade your PSU.
CPU: Intel i9-12900K Mainboard: EVGA Z690 Classified GPU: EVGA RTX 3090 FTW3 Ultra RAM: Corsair Vengeance DDR5 - 32GB PSU: EVGA SuperNOVA 1600 T2 OS: Windows 11
|
Narune
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2010/11/04 10:49:53
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 11:01:22
(permalink)
|
fergusonll
FTW Member
- Total Posts : 1686
- Reward points : 0
- Joined: 2013/02/21 09:49:10
- Status: offline
- Ribbons : 3
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 11:14:10
(permalink)
|
rain2_usa
SSC Member
- Total Posts : 523
- Reward points : 0
- Joined: 2020/09/15 19:29:36
- Status: offline
- Ribbons : 1
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 11:26:37
(permalink)
Narune
FCooley
The specs on the Corsair Website says your PSU has 8 PCIe connectors. I looked at the picture on the back of the PSU and it looks like it has six 8-pin pcie slots and two 6-pin pci slots. So yes, you will be able to hook 3 separate pcie 8-pin cables to the RTX 380 FTW3.
It may be that you are thinking that the pcie cables that are 6+2 are split cables, they are not, they can be used as 6-pin or 8-pin. For 8-pin you need to put the top of the cable together to form an 8-pin connection.
Crap, I posted the wrong link. This is my PSU-
That still takes me to an 850w, 80 plus Gold Certification PSU. The PSU is listed as having 4 PCIe connectors (2 cables with 2 full PCIe connectors on it.). This gives you the headroom you need to connect a 3080. I'm using a 750w Seasonic PSU with the same basic connector setup as yours and know I can connect a 3080 to it. One of the cables will be using both 8-pin connectors and the 2nd cable will go to the 3rd. If you did purchase the 1000w PSU, you're definitely going to have plenty of headroom for future upgrades and overclocking until you hit the Threadripper territory.
Core i7 6700k Gigabyte Z170XP-SLI 2x8GB Team T-Force Vulcan Z 3200Mhz EVGA 2070 Super XC Ultra Corsair AIO? with 3D Printed spacer Mushkin 240GB SSD 1TB NVMe 1TB Seagate SSHD LG Black BD-Drive UH12NS30 Seasonic Focus GM-750 80+ Gold Silverstone Grandia GD09B HTPC Case
|
ty_ger07
Insert Custom Title Here
- Total Posts : 16575
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 271
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 11:34:37
(permalink)
Narune
FCooley
I only see two pcie 8-pin connectors on that PSU. You will either have to get the XC3 or upgrade your PSU.
I ordered this- https://www.amazon.com/gp..._s00?ie=UTF8&psc=1
I don't think that you needed to. I think your existing PSU was fine.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
|
StayThePath
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2020/09/16 07:41:35
- Status: offline
- Ribbons : 0
Re: If I have only 2 8pin pcie outs on my PSU can I daisy chain to get the 3rd 8pin on a F
2020/09/16 11:42:04
(permalink)
It's a thermal take tough power grand 750watt if it matters
|
Narune
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2010/11/04 10:49:53
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 11:49:58
(permalink)
 These are the cables running to my GPU.
Attached Image(s)
|
Narune
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2010/11/04 10:49:53
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 11:53:43
(permalink)
ty_ger07
Narune
FCooley
I only see two pcie 8-pin connectors on that PSU. You will either have to get the XC3 or upgrade your PSU.
I ordered this- https://www.amazon.com/gp..._s00?ie=UTF8&psc=1
I don't think that you needed to. I think your existing PSU was fine.
My question is, is it safe to use one of those additional 6+2 pin connectors hanging off to the side?
Attached Image(s)
|
Intoxicus
iCX Member
- Total Posts : 406
- Reward points : 0
- Joined: 2009/10/23 19:03:35
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 12:16:22
(permalink)
"Humans are not rational animals, humans are rationalizing animals." -Robert A Heinlein
|
rain2_usa
SSC Member
- Total Posts : 523
- Reward points : 0
- Joined: 2020/09/15 19:29:36
- Status: offline
- Ribbons : 1
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 12:22:28
(permalink)
Narune
ty_ger07
Narune
FCooley
I only see two pcie 8-pin connectors on that PSU. You will either have to get the XC3 or upgrade your PSU.
I ordered this-
I don't think that you needed to. I think your existing PSU was fine.
My question is, is it safe to use one of those additional 6+2 pin connectors hanging off to the side?
I have the same kind of cables. I have no knowledge about the safety of using both on a single card. I think I saw some articles talk about the recommendation for using separate cables, but I didn't really read into their explanation since it seems common practice to include two connectors on 1 cable from many PSU manufacturers. If I were you, I'd be comfortable with that PSU due to the headroom and Gold certification and that it's from Corsair, which is a reputable brand. But your comfort level will vary of course. If it'll make you feel better to have separate cables, then by all means, proceed with the 1000w PSU. It'll definitely give you room to upgrade in the future without upgrading the PSU.
Core i7 6700k Gigabyte Z170XP-SLI 2x8GB Team T-Force Vulcan Z 3200Mhz EVGA 2070 Super XC Ultra Corsair AIO? with 3D Printed spacer Mushkin 240GB SSD 1TB NVMe 1TB Seagate SSHD LG Black BD-Drive UH12NS30 Seasonic Focus GM-750 80+ Gold Silverstone Grandia GD09B HTPC Case
|
ty_ger07
Insert Custom Title Here
- Total Posts : 16575
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 271
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 12:27:25
(permalink)
☄ Helpfulby Narune 2020/09/16 19:23:14
Narune
ty_ger07
Narune
FCooley
I only see two pcie 8-pin connectors on that PSU. You will either have to get the XC3 or upgrade your PSU.
I ordered this- https://www.amazon.com/gp..._s00?ie=UTF8&psc=1
I don't think that you needed to. I think your existing PSU was fine.
My question is, is it safe to use one of those additional 6+2 pin connectors hanging off to the side?
Like I said, yes, I think it would be fine. Safe? Without a doubt. Corsair wouldn't make that cable if Corsair didn't think that it could handle at least 300 watts. The three 8-pins are designed to meet the minimum specifications (which are pathetic). EVGA puts 3 8-pin connectors on the card so that 1) it looks like a powerful beast of a card which must be better for some reason, and 2) so that you can use the absolutely trashiest power supply which barely meets the ATX specifications, and it won't start on fire. Your Corsair power supply is not a piece of trash and can handle way more amperage (and thus power) than the minimum specification, and therefore it is safe; without a doubt. Like I said in the other thread, which I linked to above, watch this video: If you have the attention span, pay attention to what he says about amperage rating, cable gauge, and temperature. The minimum specifications are just the absolute bare minimum for the worst trashiest PSU which can still be sold. Respectable PSUs, like yours, use much better wires and connectors. Again, Corsair wouldn't sell the cable if it wasn't designed to handle the power.
post edited by ty_ger07 - 2020/09/16 12:32:23
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8888
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/09/16 12:30:38
(permalink)
☄ Helpfulby Narune 2020/09/16 19:23:21
Narune
Wait, is using a Split connector safe for this kind of card?
Using two connectors on the same PSU cable is safe but it's best to avoid if possible. If you have to use though it's perfectly fine. Also using the 6+2 is just as good as using an 8 pin cable.
|
StayThePath
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2020/09/16 07:41:35
- Status: offline
- Ribbons : 0
Re: If I have only 2 8pin pcie outs on my PSU can I daisy chain to get the 3rd 8pin on a F
2020/09/16 13:34:14
(permalink)
Ok so I did some research on my psu and it's not very good other than being an 80plus gold. I'm gonna try to get a xc3 ultra and if I can't but can get a ftw3 I'll just buy a ftw 3 and a new psu.
|
BHPhreak
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/09/30 15:02:11
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/04 17:07:20
(permalink)
hey, that video was really informative. im currently in line for the ftw3, and my psu is this exact model www.thermaltake.com/toughpower-750w-gold-modular.htmlit did come with pcie cables that have split ends on one side. so i can theoretically plug into 4 pcie 8 pin connectors. would you say this power supply is good enough to plug both my pcie cables into the card, and then use one of the split ends for the third pcie slot on the ftw3?
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/04 17:31:55
(permalink)
BHPhreak
hey, that video was really informative.
im currently in line for the ftw3, and my psu is this exact model www.thermaltake.com/toughpower-750w-gold-modular.html
it did come with pcie cables that have split ends on one side. so i can theoretically plug into 4 pcie 8 pin connectors.
would you say this power supply is good enough to plug both my pcie cables into the card, and then use one of the split ends for the third pcie slot on the ftw3?
Use an individual cable each for the 1st and 2nd connectors, then use the daisy chained plug from the 1st connector to the 3rd connector. IIRC on the GPU-Z readouts I've seen, the 2nd plug pulls a bit more power, so that's the one to put on it's own cable. https://forums.evga.com/G...nd-board-m3085826.aspx Should be ok in general, but you'll be pushing the PSU pretty hard at max power limit and it might not OC as well as if you had a superb oversized PSU.
post edited by kevinc313 - 2020/10/04 17:33:59
|
BHPhreak
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/09/30 15:02:11
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/04 18:23:06
(permalink)
kevinc313
BHPhreak
hey, that video was really informative.
im currently in line for the ftw3, and my psu is this exact model
it did come with pcie cables that have split ends on one side. so i can theoretically plug into 4 pcie 8 pin connectors.
would you say this power supply is good enough to plug both my pcie cables into the card, and then use one of the split ends for the third pcie slot on the ftw3?
Use an individual cable each for the 1st and 2nd connectors, then use the daisy chained plug from the 1st connector to the 3rd connector. IIRC on the GPU-Z readouts I've seen, the 2nd plug pulls a bit more power, so that's the one to put on it's own cable.
Should be ok in general, but you'll be pushing the PSU pretty hard at max power limit and it might not OC as well as if you had a superb oversized PSU.
hey, this is some excellent advice. i really appreciate you taking the time to respond, and provide me with further resources to learn more. thank you very much
|
chumeniuk
Superclocked Member
- Total Posts : 176
- Reward points : 0
- Joined: 2011/04/13 10:06:29
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/05 03:55:23
(permalink)
Back when Ethereum mining was a thing, I would use a single cable with a daisy chained 6+2 for each 1080 Ti. An EVGA G3 1000W would run 24/7 for weeks on end without issue powering 3 cards each in that configuration. Was about the only way to get enough PCIE connectors for the cards and risers.
|
Spongey
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2016/05/27 13:06:16
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 03:49:19
(permalink)
BHPhreak
hey, that video was really informative.
im currently in line for the ftw3, and my psu is this exact model
it did come with pcie cables that have split ends on one side. so i can theoretically plug into 4 pcie 8 pin connectors.
would you say this power supply is good enough to plug both my pcie cables into the card, and then use one of the split ends for the third pcie slot on the ftw3?
I imagine your PSU is pretty close in specs to mine. Toughpower 750w but I have the Toughpower GF1 750w version and I've gotten a reply from Thermaltake Tech Department stating I wouldn't have any issues with just using 2 cables to connect to all 3 8-pin connections on the 3080 FTW3 Ultra. However, since my GPU can provide 3 separate 8-Pin cables, I went that route with my sleeved cable kit. Now I'm just waiting for the step-up que to notify step 2.
|
267D83BD9674497
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2020/09/29 00:28:29
- Status: offline
- Ribbons : 0
Re: If I have only 2 8pin pcie outs on my PSU can I daisy chain to get the 3rd 8pin on a F
2020/10/08 05:29:23
(permalink)
Intoxicus There is a reason they're doing 3X8pin. If they could use 2X8pin they would.
You're basically making 2 outputs feed 3 inputs beyond the output's capacity. This can results in melting cables, fires, damaged hardware, etc. There is indeed a reason: Each 8pin input socket is rated to 150W max. But that does not mean you definitely cannot use one output of the PSU to feed two GPU inputs. That depends on the cable rating and on the PSU's internal design – read: How many power rails does the PSU offer, is every PCIe output of the PSU fed by a different power rail or does it all come from one, how much power can every rail deliver etc. For example I do own a Corsair TX650M, which has two separate PCIe 8pin outputs, but only one 12V power rail internally. So, as long as I do not exceed each cable's power rating, it's rather a cosmetical question whether I use two cables with one 8pin connector on the GPU each, or just one cable with two daisy-chained connectors. But to give a simpler answer: As long as you're using the PSU's original PCIe cables, you're on the safe side. If the manufacturer provides with you with a daisy-chained 8pin plug, that means the whole assembly must be capable of handling the full 300W. Simple as that.
|
jankerson
SSC Member
- Total Posts : 901
- Reward points : 0
- Joined: 2017/07/13 06:50:53
- Status: offline
- Ribbons : 1
Re: If I have only 2 8pin pcie outs on my PSU can I daisy chain to get the 3rd 8pin on a F
2020/10/08 05:50:48
(permalink)
Cool GTX
StayThePath
Yeah, I saw that post from ASUS on reddit and that's actually what sparked the idea that I may be able to get a FTW3 instead of an XC3 ultra. From my understanding though, the ASUS cards aren't using power from the PCIe slot whereas EVGA are(I think). If I can split(I guess this is the correct term instead of daisy chain), I will get a FTW3 and then buy a new psu in a month or two. Someone said on reddit that the split actually draws more power from the psu, though not exactly double, so it may be possible if that random guy on the internet is correct, which he most certainly may not be.
That being said, the ftw3 drawing 450 seems like a different deal compared to the ASUS cards, so maybe I should just stick with an XC3 Ultra.
Best practice is to use separate cables for Each 8-pin .... this became the recommendation of PSU Mfg with the 20 series cards
That said - Ask your PSU Mfg if they recommend it .... you risk damaging the PSU socket - even if it "works"
Stability could be affected 
Exactly correct. If in doubt contact the PSU manufacture. The issue people are having in general here is: MOST as in almost all PSUs 750W and below don't have enough PCIe cable ports coming from the PSU end to run 3 separate cables for the 3X slot cards. So both with the recommendations by both Nvidia and EVGA saying that PSU of 750W or higher is recommended is causing some issues. Combine that with people under recommending PSU wattage for the 3080's and 3090's and that will and is creating a lot of issues. Then there are some PSUs that are having problems with the 3080's and 3090's creating even more problems. All of that said: It is best practice to use separate connections from the PSU to each of the power connections on the GPUs. I have a Corsair HXI 850 PSU so I can monitor the power draw from the PSU to the components. (NOT FROM THE WALL) Actual max power draw from the PSU on my system below is 692W, that's loading both the GPU and CPU so the 3080 FTW3 Ultra is pulling every bit of 420W+.... That's not including power spikes that are much higher...
post edited by jankerson - 2020/10/08 06:08:27
i9 9900K @ 5.0 GHz, NH D15, 32 GB GSKILL Trident Z RGB, AORUS Z390 MASTER, EVGA RTX 3080 FTW3 Ultra, Samsung 970 EVO Plus 500GB, Samsung 860 EVO 1TB, Samsung 860 EVO 500GB, ASUS ROG Swift PG279Q, Steel Series APEX PRO, Logitech Gaming Pro Mouse, CM Master Case 5, Corsair AXI 1600W. i7 8086K, AORUS Z370 Gaming 5, 16GB GSKILL RJV 3200, EVGA 2080TI FTW3 Ultra, Samsung 970 EVO 250GB, (2)SAMSUNG 860 EVO 500 GB, Acer Predator XB1 XB271HU, Corsair HXI 850W. i7 8700K, AORUS Z370 Ultra Gaming, 16GB 16GB DDR4 3000, EVGA 1080Ti FTW3 Ultra, Samsung 960 EVO 250GB, Corsair HX 850W.
|
StayThePath
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2020/09/16 07:41:35
- Status: offline
- Ribbons : 0
Re: If I have only 2 8pin pcie outs on my PSU can I daisy chain to get the 3rd 8pin on a F
2020/10/08 12:17:58
(permalink)
If it matters to anyone I have a thermaltake tough power grand 750w and I contacted thermaltake. The guy tried it on Monday and said it shorted the psu and said straight up, "Do not do this."
|
rckrz6
New Member
- Total Posts : 82
- Reward points : 0
- Joined: 2018/12/16 09:37:02
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 12:31:54
(permalink)
jacob said you can run 1 cable with no splitter and then a second cable with a splitter to make 3
|
StayThePath
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2020/09/16 07:41:35
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 12:35:48
(permalink)
rckrz6
jacob said you can run 1 cable with no splitter and then a second cable with a splitter to make 3
Yeah I know, I saw that too. I contacted thermaltake anyway and the dude literally tried it and said it broke the psu. You do what you want, but I'm not gonna risk it. My queue spot for xc3 ultra is higher anyway so I'm going with that. Thermaltake psu's kinda suck so maybe Jacob assumes we have good evga psu s.
|
JayManB
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2011/08/10 07:55:37
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 13:45:08
(permalink)
StayThePath
rckrz6
jacob said you can run 1 cable with no splitter and then a second cable with a splitter to make 3
Yeah I know, I saw that too. I contacted thermaltake anyway and the dude literally tried it and said it broke the psu. You do what you want, but I'm not gonna risk it. My queue spot for xc3 ultra is higher anyway so I'm going with that. Thermaltake psu's kinda suck so maybe Jacob assumes we have good evga psu s.
All that tells me is I would never buy a Thermaltake PSU.
|
JayManB
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2011/08/10 07:55:37
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 13:48:56
(permalink)
Chumenuik said earlier in the thread that he was using one cable per 1080ti without issue.
I know my 1080Ti pulls 260w during 100% gaming load. So I think using 2 cables with 3 connectors should work fine.
|
rckrz6
New Member
- Total Posts : 82
- Reward points : 0
- Joined: 2018/12/16 09:37:02
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 14:51:29
(permalink)
I mean I personally wouldn’t use anything less then 3 cables but if you wanna try 2 it’s on you lol
|
jankerson
SSC Member
- Total Posts : 901
- Reward points : 0
- Joined: 2017/07/13 06:50:53
- Status: offline
- Ribbons : 1
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 14:53:57
(permalink)
JayManB
Chumenuik said earlier in the thread that he was using one cable per 1080ti without issue.
I know my 1080Ti pulls 260w during 100% gaming load. So I think using 2 cables with 3 connectors should work fine.
Mining is not the same as gaming, not even remotely close. Nowhere near the same power draw as when gaming...
i9 9900K @ 5.0 GHz, NH D15, 32 GB GSKILL Trident Z RGB, AORUS Z390 MASTER, EVGA RTX 3080 FTW3 Ultra, Samsung 970 EVO Plus 500GB, Samsung 860 EVO 1TB, Samsung 860 EVO 500GB, ASUS ROG Swift PG279Q, Steel Series APEX PRO, Logitech Gaming Pro Mouse, CM Master Case 5, Corsair AXI 1600W. i7 8086K, AORUS Z370 Gaming 5, 16GB GSKILL RJV 3200, EVGA 2080TI FTW3 Ultra, Samsung 970 EVO 250GB, (2)SAMSUNG 860 EVO 500 GB, Acer Predator XB1 XB271HU, Corsair HXI 850W. i7 8700K, AORUS Z370 Ultra Gaming, 16GB 16GB DDR4 3000, EVGA 1080Ti FTW3 Ultra, Samsung 960 EVO 250GB, Corsair HX 850W.
|
StayThePath
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2020/09/16 07:41:35
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 15:07:03
(permalink)
JayManB
StayThePath
rckrz6
jacob said you can run 1 cable with no splitter and then a second cable with a splitter to make 3
Yeah I know, I saw that too. I contacted thermaltake anyway and the dude literally tried it and said it broke the psu. You do what you want, but I'm not gonna risk it. My queue spot for xc3 ultra is higher anyway so I'm going with that. Thermaltake psu's kinda suck so maybe Jacob assumes we have good evga psu s.
All that tells me is I would never buy a Thermaltake PSU.
I know I'm never gonna buy one again. I'm thinking about replacing this one even though it works.
|
Huntercyril
iCX Member
- Total Posts : 349
- Reward points : 0
- Joined: 2016/10/26 07:28:31
- Status: offline
- Ribbons : 0
Re: The 3080 FTW Uses Three 8-pins, My PSU Only Has Two 8-Pin Sockets
2020/10/08 16:20:29
(permalink)
Iirc Jacob ran a 10900k (or 10700k) OC (might be wrong about that) and a 3080 on a 650w PSU. Not that he would recommend it but yeah a good PSU can go a long way. I have a Corsair RMx (or RMi can't remember, the one that has iCue support) so i'm not too worried about running a daisy chain. Might try to do a bit of undervolting, someone managed to get 70w less and almost no hit in performance so might be worth a try.
|