the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/05/24 12:43:41
(permalink)
STAFFI_1991
hi all, sorry for my english
my GTX 1070 FTW has already installed this thermal pads ( is it possible that this pad installed in factory ?)
but when i chek my serail number on this site: https://www.evga.com/support/register.asp it says recommended steps to do
my bios version is 86.04.1e.00.70, proposed bios version is 86.04.50.00.72
If this procedure was performed in the factory ( thermal mod) , why does not have this card new bios
More than likely it is just a bios update in general, and the current bios isn’t going to hurt anything. Bios updates happen for numerous reasons.
|
STAFFI_1991
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2012/05/05 05:45:23
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/05/24 13:56:35
(permalink)
the_Scarlet_one
STAFFI_1991
hi all, sorry for my english
my GTX 1070 FTW has already installed this thermal pads ( is it possible that this pad installed in factory ?)
but when i chek my serail number on this site: https://www.evga.com/thermalmod/it says recommended steps to do
my bios version is 86.04.1e.00.70, proposed bios version is 86.04.50.00.72
If this procedure was performed in the factory ( thermal mod) , why does not have this card new bios
More than likely it is just a bios update in general, and the current bios isn’t going to hurt anything. Bios updates happen for numerous reasons.
thank for answer about bios please help me to determine this thermal pads what i see in my card, is it original thermal mod kit or fake poor quality pads ? because of, when i chek my card S/N on this link, it say that i need thermal mod https://www.evga.com/thermalmod/can i request this pads now ?
CPU: intel i3 8100 M/B: Aorus B360 Gaming 3 Wi-Fi RAM: G.Skill RipjawsV 16GB GPU: EVGA GTX 1070 FTW PWR: Enermax Platimax 1350W SSD: Samsung PM961 256gb HDD: Seagate 1TB + intel Optane Case: Deepcool Earlkase Monitor: Asus VX239H
|
tattude69
iCX Member
- Total Posts : 499
- Reward points : 0
- Joined: 2013/04/21 15:30:52
- Location: NY
- Status: offline
- Ribbons : 7
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/05/25 05:45:41
(permalink)
I was told buy tech support a few weeks ago they were out and i would have to buy some elsewhere, but that was also after they said they would send me some, So it cant hurt to ask. Good Luck
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/05/25 10:45:11
(permalink)
STAFFI_1991
thank for answer about bios
please help me to determine this thermal pads what i see in my card, is it original thermal mod kit or fake poor quality pads ?
because of, when i chek my card S/N on this link, it say that i need thermal mod https://www.evga.com/thermalmod/
can i request this pads now ?
Those look the same as the pads that were sent out by EVGA. Did you purchase the card brand new or from someone else? If you bought it from someone else, they may have added the pads themselves and it should be fine. If it is new, then they probably applied the pads and it just didn’t get updated in the system. As long as there is a bad installed, there shouldn’t be anything to worry about. The pads EVGA sent out initially were not a super expensive pad, so it shouldn’t hurt to just keep the one that is already installed where it is. You could still ask, but I doubt it will make very much difference.
|
SmackArtVideo
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2019/07/02 11:25:59
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/07/02 11:58:37
(permalink)
Hi all - I've come to this forum out of necessity after hearing about the thermal issue and need for updated bios.
My 1070 was purchased prior to the updated bios & thermal pad upgrade and burst into flames. Yes, Flames. Taking my motherboard with it.
So my question is: Was this upgrade something that any of you were contacted by EVGA via your GTX1070 registration or was it only available if you looked for it here?
Thanks!
Video EditorHPZ640 i7, Dual Xeons, 64GB ram, EVGA GTZ1070 until it burst into flames
|
Sajin
EVGA Forum Moderator
- Total Posts : 49164
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/07/02 12:43:47
(permalink)
The bios update & thermal pads wouldn't have stopped your card from bursting into flames.
|
DRIZTT
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2019/11/20 02:16:16
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/11/20 02:20:39
(permalink)
I have just bought a brand new 1070 ft 2 days ago. Is the thermal pad still an issue or have evga put the correct pads in after the problems was raised? I don't want to open up my card just to check if possible
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/11/20 04:58:20
(permalink)
DRIZTT
I have just bought a brand new 1070 ft 2 days ago. Is the thermal pad still an issue or have evga put the correct pads in after the problems was raised? I don't want to open up my card just to check if possible
You wouldn’t need to open the card, you can just look from the side and see them. “Brand new” 3 years after the issue started is a little hard to believe. Is it brand new to you, or actually brand new with full 3 year warranty from EVGA? Most of the possibility will depend on the actual card, as the thermal pads were set to be replaced a couple of years ago. You should contact EVGA customer support and have them verify the serial number, and they can tell you more about the card as well as the status of the thermal pads.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31231
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2019/11/20 05:00:50
(permalink)
☄ Helpfulby Cool GTX 2020/11/24 07:20:42
the_Scarlet_one
DRIZTT
I have just bought a brand new 1070 ft 2 days ago. Is the thermal pad still an issue or have evga put the correct pads in after the problems was raised? I don't want to open up my card just to check if possible
You wouldn’t need to open the card, you can just look from the side and see them.
“Brand new” 3 years after the issue started is a little hard to believe. Is it brand new to you, or actually brand new with full 3 year warranty from EVGA? Most of the possibility will depend on the actual card, as the thermal pads were set to be replaced a couple of years ago.
You should contact EVGA customer support and have them verify the serial number, and they can tell you more about the card as well as the status of the thermal pads.
Welcome to the EVGA Forums DRIZTT  Check Your Card's Serial Number Here: https://www.evga.com/thermalmod/
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
ethan93m
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2020/09/28 08:07:01
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/09/28 08:58:12
(permalink)
|
TheBobAbides
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2017/08/05 18:21:09
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/10/06 04:37:41
(permalink)
I got to tell ya, having a huge CPU cooler and an ITX motherboard is scary for overclocking. Thankful for the Temp sensors. Was getting degradation in performance over time and though my temps were in the 80s C, both CPU and GPU in hardware monitor, I didn't think too much about it. Then I remembered that it has other sensors so I pulled up the temp sensors, and my jaw hit the floor. The main die temp sensor was reading 82C, but the back of the GPU temp was 96C. This was insane so I first ordered a GPU stand and PCIe extension. And this helped my temps a lot. CPU would spike in the 70s C, but be in the high 60s C with a load. The GPU was amazingly now never going over 65C but was still unstable. Had never taken a GPU apart yet have replaced the thermal paste on my CPU many times so I figured I would try it on the GPU. I got it apart, cleaned the old paste off, and put the new paste on fearful it would never boot again. And it booted, better than new. Able to OC my GPU much higher than before and very stable. Good thermal paste for the win!!
|
Data1987
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/11/13 10:52:16
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/11/13 11:03:42
(permalink)
U know what?.....im going to try it. >)
|
kageroo1
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2020/11/11 06:21:48
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/11/24 02:36:29
(permalink)
hey, @the_Scarlet_one , just to be clear I don't have to do this if I bought my 1070 FTW2 recently, right? Because I did check with my SN, however I can only find the checking process on the American site and I bought my card in Europe, also yet again there is no feedback when I input my SN... so all I can do is "assume" I don't need the thermal pads, but you know what they say about that. Well, I don't have an issue with temps per say, though I find it a bit suspicious how far I have to crank up the fans compared to my previous gpu. I get 49C which is ok, at 60-70 % fan speed at ~97% usage, which is, loud... Tldr: is there a way to check this without opening up the card and does the American evga site have the data for cards sold in Europe or do you have a link where I could check (I know they say "sold after..." but for all I know this card could have been sitting in a warehouse for years before I bought it...)
post edited by kageroo1 - 2020/11/24 02:53:59
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/11/24 03:46:48
(permalink)
Nope you shouldn’t have to worry about this with the FTW2.
|
kageroo1
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2020/11/11 06:21:48
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/11/24 07:33:08
(permalink)
the_Scarlet_one
Nope you shouldn’t have to worry about this with the FTW2.
ok, thanks, I was really worried about this prior buying this card because I read all kinds of stuff on reddit... info seems to have been wrong tho, and yeah, temps seem to be obviously very good on my card. :o
|
Jjackbean
Superclocked Member
- Total Posts : 103
- Reward points : 0
- Joined: 2020/12/02 14:53:52
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/12/02 22:23:49
(permalink)
wow thank you. warranty still applied right?
|
jayrwar
Superclocked Member
- Total Posts : 113
- Reward points : 0
- Joined: 2020/05/27 06:42:57
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/12/14 18:42:56
(permalink)
|
FractalEvolution
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2016/12/24 06:58:45
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/12/25 06:27:54
(permalink)
I can't get them to respond to my ticket. I've asked them if they still deliver these pads or not because I plan to re-paste my GTX1070 AC3 and should put those pads in. I've heard that pads they send have subpar thermal conductivity (<2 W/mK) so buying my own might be safe solution.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/12/25 06:38:30
(permalink)
FractalEvolution
I can't get them to respond to my ticket. I've asked them if they still deliver these pads or not because I plan to re-paste my GTX1070 AC3 and should put those pads in. I've heard that pads they send have subpar thermal conductivity (<2 W/mK) so buying my own might be safe solution.
You can buy your own, and currently EVGA is going to be closed during the Christmas break. The 2W/mK Doesn’t mean much, as long as the pads are in good condition. I have tried the 6, 11, and 17 w/mK pads, and they all performed exactly the same from what I could tell. In the end, the only noticeable difference was that the extremely expensive ultra high performance pads fell apart when trying to remove them. The company claims of performance asked just that, claims. Speaking with gamersnexus, I sent over a couple of hundred dollars worth of thermal pads, and they were going to try and find a way to test them. They were never able to find a definitive way to test the pads. Don’t buy into the hype of super expensive pads, as it is a waste of money.
|
FractalEvolution
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2016/12/24 06:58:45
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2020/12/26 11:23:01
(permalink)
Roger roger. I have those pink thermal pads 6W/mK sitting around, but Im out of 1.5mm one so I will have to wait for that. Thanks the_Scarlet_one :) PS I have asked them a week ago
post edited by FractalEvolution - 2020/12/26 11:25:20
|
FearTehPanda
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2020/12/16 22:50:15
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/01/08 16:46:56
(permalink)
Excellent Guide, Thank you much appreciated
|
Nam01
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2012/05/26 11:32:15
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/01/21 17:22:49
(permalink)
I have got the 1080 FTW2 and had this since release and also updated the 11ghz bios update and I've just replaced the tim with Mx4 as the temps and fans were playing up on default fan profile, thing is 2 thermal pads were damaged removing but i did manage to refit them to fully cover, on testing temps/fans were fine and looking good, but after i was looking at thermal pads and seen EK (blue) for water blocks but don't seem to sell any other type but price was good as some pads are just silly money, question is will they be ok on the graphics card ? or people used them on here, as if they are ok ill buy just for future backup also why so many dam screws lol, remember the days when it was less i had to use a magnet tray, might just be me getting old and fluffy
post edited by Nam01 - 2021/01/21 18:29:54
Asus X79 Black Editon,4930k, Corsair H115i PRO, Corsair Dom GT 32GB + AirFlow Pro,MX200 1TB, Intel 520 240GB SSD, EVGA 1080 FTW2 iCX, Corsair HX1000i, Alpha/Sdc LCD screens, Cosmos 2.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/01/21 17:53:58
(permalink)
If the pad is thick enough to fit between the cooler and it makes good contact, it will work. Make sure you remove the plastic cover on both sides of the thermal pad, because the thermal pad itself is gray, not blue. I say that, because the blue side is extremely thin, and will feel like it isn’t covered by anything else. Also be aware, the blue side is the most difficult to remove of the two sides lol.
|
Nam01
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2012/05/26 11:32:15
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/01/21 18:34:17
(permalink)
the_Scarlet_one
If the pad is thick enough to fit between the cooler and it makes good contact, it will work. Make sure you remove the plastic cover on both sides of the thermal pad, because the thermal pad itself is gray, not blue. I say that, because the blue side is extremely thin, and will feel like it isn’t covered by anything else. Also be aware, the blue side is the most difficult to remove of the two sides lol.
can get any size , what I've read is 1mm is the size to get, ek only show blue that what got me but they were advertising and a water thermal pad lol
Asus X79 Black Editon,4930k, Corsair H115i PRO, Corsair Dom GT 32GB + AirFlow Pro,MX200 1TB, Intel 520 240GB SSD, EVGA 1080 FTW2 iCX, Corsair HX1000i, Alpha/Sdc LCD screens, Cosmos 2.
|
FractalEvolution
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2016/12/24 06:58:45
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/01/27 14:28:10
(permalink)
Little update, my pads arrived 10 days after shippend from Germany. They still supply these to owners of GTX1070/1080 which is really great!
|
Thomas ben Yeshua
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2021/02/10 06:18:59
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/02/10 06:21:10
(permalink)
This is great. Do you know where I can find this same sort of thing for a 1070 ti founders?
|
Lotust251
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2021/03/23 10:57:07
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/04/06 15:59:27
(permalink)
fast forward to 2021 does anyone know who sells enough size of the pad/s illl need? EVGA does not suppy the kit anymore and i would like to do this mod.
|
Zerhot
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2021/04/27 23:25:52
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/04/28 09:19:52
(permalink)
|
Kappa no Jutsu
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2020/09/23 13:02:27
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/04/28 10:07:28
(permalink)
I hope this maintains the warranty. I saw posts on reddit saying people were getting denied rma because they opened up the card for the same procedure.
|
Ghen67
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2021/03/22 15:32:01
- Status: offline
- Ribbons : 0
Re: How to apply the Thermal Pads for the 1070/1080 Cards
2021/04/28 10:08:27
(permalink)
This was really helpful. Thank you!
|