EVGA

Helpful ReplyGet It Colder II

Page: << < ..171172173174175.. > >> Showing page 174 of 396
Author
Post
Essentials Only Full Version
pwnzorz
iCX Member
  • Total Posts : 346
  • Reward points : 0
  • Joined: 2009/11/15 05:51:06
  • Status: offline
  • Ribbons : 0
Re:Get It Colder II 2010/05/10 19:51:51 (permalink)
My vcore is so high, its at like 1.5750

Evga E760 Classified
920 D0 @ 4.4ghz
6GB Mushkin Redline 2000mhz
Radeon 5970 @ 950/1250
Radeon 5870 @ 950/1250
Dell 27inch U2771
Dell 30inch 3007
Koolance Exos 2.5 
Intel X-25M G2 80GB SSD
300GB Western Digital Veliocraptor
750GB Western Digital Caviar


#5191
awalleyeguy
CLASSIFIED Member
  • Total Posts : 2604
  • Reward points : 0
  • Joined: 2007/10/27 09:21:56
  • Location: Next door to Elvis
  • Status: offline
  • Ribbons : 12
Re:Get It Colder II 2010/05/10 20:04:54 (permalink)
xxrabid93

walleye, power supply dying maybe?


Have not checked that PSU as it was only a back up and was using only on the one 480 in question.
But I have since ordered a Antec TQP 1200, Because I did have to use a second psu for only 2x480's.
It makes more sense to me that the "pops" were from psu and not 480. But on visual inspection nothing looked bad or burnt.
But I also have not hooked that psu up to anything either for fear of frying something.
Going to check out puts later this week.

My vcore is so high, its at like 1.5750  for what kinda OC and what are temps.


HEAT  

url=https://www.evga.com/associates/default.aspx?associatecode=U4WBM7JX3CJE24C][/url]
#5192
xxrabid93
FTW Member
  • Total Posts : 1315
  • Reward points : 0
  • Joined: 2008/09/08 13:49:33
  • Location: Naperville, IL
  • Status: offline
  • Ribbons : 8
Re:Get It Colder II 2010/05/10 20:25:53 (permalink)
awalleyeguy

xxrabid93

walleye, power supply dying maybe?


Have not checked that PSU as it was only a back up and was using only on the one 480 in question.
But I have since ordered a Antec TQP 1200, Because I did have to use a second psu for only 2x480's.
It makes more sense to me that the "pops" were from psu and not 480. But on visual inspection nothing looked bad or burnt.
But I also have not hooked that psu up to anything either for fear of frying something.
Going to check out puts later this week.



Interesting. What PSU is it? Did you smell the PSU? Also, did you just look through a fan hole on the PSU to see if it was burnt?
 
You could put the psu hooked up to just a few things (to keep it from burning out from no load), jump it, and see if it starts smelling like it is burning. Maybe just hook it up to some fans for the load, so if it does burn up, it would olny take a few fans with it instead of a mobo or gpu. Just an idea...

Heatware: http://www.heatware.com/eval.php?id=67083
#5193
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/10 20:28:36 (permalink)
I broke everything down the other day and found a little rust. Just like you, John...I guess I'll experiment more with insulation. Good thing for plasti-dip!





So then, tonight, I put one of my 295's back on air. I was thinking of rma'ing this card since I still have some output quality issues. I spoke about it before and thought it was the sli bridge, but no, it still has low resolution "look" to it.  Not the low res of a performance vantage run, but a little worse than that when running vantage.  the color is not fully saturated.  It happens only in 3d applications.  Desktop is fine.  I don't really know how to explain it...maybe I'll take a pic later.




So I benched it a little, and on air, it still beats iride's best single GTX 480 on water with heavy overclocks. (He currently has the best 480 single card run, followed closely by awalleye)



It's a killer bench card, but if I ever sold it, I'm not sure gamers would like the screen quality. Evga said they could get me a dualie replacement, but it would take 2-3 weeks. I don't care about the down time.
What do you guys think...rma it, or keep it.
post edited by Q56_Monster - 2010/05/10 20:54:42

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5194
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/10 21:49:11 (permalink)
damn...i think i may plastic dip the front of my board tonight.

oh yeah....that rust is hella crazy.....im thinking it means the eraser is not fully sticking to the bracket and air is getting in...speculation of course.



also...i bought me a laptop...nothing fancy though...just needed something better than my old nc8430

Q:
do an advanced rma...that way you keep your card till the new one arrives.
post edited by johnksss - 2010/05/10 21:55:14

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5195
xxrabid93
FTW Member
  • Total Posts : 1315
  • Reward points : 0
  • Joined: 2008/09/08 13:49:33
  • Location: Naperville, IL
  • Status: offline
  • Ribbons : 8
Re:Get It Colder II 2010/05/10 21:55:38 (permalink)
wow, i definitely have to break down my rig that still has eraser on it. I hope the rust isn't bad for me (hopefully there is none of it). That would suck if rust KO'd a board...

Heatware: http://www.heatware.com/eval.php?id=67083
#5196
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/10 22:08:14 (permalink)
its not like permanent rust...it's cleanable...but rust all the same.




post edited by johnksss - 2010/05/10 22:19:51

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5197
ajr23
FTW Member
  • Total Posts : 1183
  • Reward points : 0
  • Joined: 2009/04/04 11:34:18
  • Location: Issaquah, Wa
  • Status: offline
  • Ribbons : 4
Re:Get It Colder II 2010/05/10 22:57:28 (permalink)


these 470 sure are fun to play around with had a run finish yesterday at 860/920 with physx, my water blocks are here but i am too lazy to put them on yet. ans sorry johnksss i knocked you down a spot on hwbot
http://hwbot.org/communit...ce_gtx_470_19903_marks

Heatware



#5198
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/10 23:05:58 (permalink)
that's great news!!...im going to have this card long enough till they get the 480's in,...then 

it's history.

best make them count now...tomorrow ill put the pedal to the medal on this card.

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5199
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:Get It Colder II 2010/05/11 02:57:57 (permalink)
johnksss

yep!

but if you put your ear on the hose...you should be able to hear it.


side note
johnksss ---------------- i7 920@ 4.650-------(1) 470  800/1000/1600 ------17833 ---- 70068 ---- P21918 ---- Stock

check me out...made the 70k cpu score club...woohooo


Man, that card ATE the phys X test for breakfast

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#5200
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/11 03:02:02 (permalink)
indeed!

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5201
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:Get It Colder II 2010/05/11 03:02:05 (permalink)
How you guys get so much rust??   even a slight coating of Vaseline will help with that. 
Q, I would suggest calling anyone you know at EVGA and seeing if they know of any hamburger 295's laying around, or you will end up getting a single PCB back. 

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#5202
pwnzorz
iCX Member
  • Total Posts : 346
  • Reward points : 0
  • Joined: 2009/11/15 05:51:06
  • Status: offline
  • Ribbons : 0
Re:Get It Colder II 2010/05/11 04:02:56 (permalink)
1.5750 @ 4.6ghz Turbo on HT OFF.

Evga E760 Classified
920 D0 @ 4.4ghz
6GB Mushkin Redline 2000mhz
Radeon 5970 @ 950/1250
Radeon 5870 @ 950/1250
Dell 27inch U2771
Dell 30inch 3007
Koolance Exos 2.5 
Intel X-25M G2 80GB SSD
300GB Western Digital Veliocraptor
750GB Western Digital Caviar


#5203
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 04:55:16 (permalink)
nateman_doo

How you guys get so much rust??   even a slight coating of Vaseline will help with that. 
Q, I would suggest calling anyone you know at EVGA and seeing if they know of any hamburger 295's laying around, or you will end up getting a single PCB back. 


Yes, i did already and they can get me a dual card.

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5204
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 05:04:43 (permalink)
xxrabid93

wow, i definitely have to break down my rig that still has eraser on it. I hope the rust isn't bad for me (hopefully there is none of it). That would suck if rust KO'd a board...


The rust looks like it comes from the hold down bracket screws.  It wipes right off the hold down bracket.  And as long as you have plastidip or eraser on the mobo, you should have no problem.  I even wiped the rust off the plasti-dip coating. 

Like John said....it's somehow air is getting in and around the bracket.  I tried eraser and PJ, but that turned out to be a real mess.  PJ breaks down the eraser into a messy goo.

I'm thinking some real think layers of foam stacked up on the area surrounding the socket (like Nate does), and some thin strips of foam between the socket and the bracket.  I saw that on xs forum...on of the top guys does it...forget who.  You have to be precise though...air has a funny way of finding it's way through sloppiness, lol!

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5205
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 05:08:04 (permalink)
johnksss



also...i bought me a laptop...nothing fancy though...just needed something better than my old nc8430





Nice 470 runs....for a second I thought you were showing us what your new laptop could do,lol!  What laptop did you get?

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5206
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/11 09:34:04 (permalink)
lol, thanks! trying to understand the 470's and how they work.
i got the gateway nv7915u. the i3-330m model and since this thing is upgradeable from the cpu point of view...i grabbed it. ran a few benchmarks with it and grabbed a few trophies. so far i like it. will switch out the the 2.13 ghz cpu for the 2.4 or 2.5 with turbo boost...later


MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5207
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 10:13:07 (permalink)
Great John!  Oh, and I see you got scook9 to join us...now that's a team leader in action!

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5208
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/11 10:44:05 (permalink)
yep.


trying to see if mandrake is game...he is on the fence about going to a desktop now.


and about the pj and the eraser... i bought a gang of that stuff.. so i just pulled it up as a whole piece...then took apart the bracket and pressure washed it clean. took a bit, but it came off.

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5209
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 12:54:16 (permalink)
I don't mind cleaning the bracket.  Because the eraser was mixed with the pj, I just wiped it off once I heated up with the hair dryer.  It was the remaining goo around the socket that needed the hands of a surgeon to remove.



Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5210
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:Get It Colder II 2010/05/11 18:20:50 (permalink)
Dude, get a dental pick.  You would be surprised what an indispensable tool it will be for you.

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#5211
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/11 19:02:20 (permalink)
man, ain't that the truth!!!!!

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5212
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 19:11:49 (permalink)
nateman_doo

Dude, get a dental pick.  You would be surprised what an indispensable tool it will be for you.


Great advice.  thanks.

I wish you could make money instead of spend money doing this stuff.....

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5213
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 19:16:33 (permalink)
Evga hooking me up!

Part Number Out: 017-P3-1291-AR
Next Step: Cross Shipping Product

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5214
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:Get It Colder II 2010/05/11 19:20:12 (permalink)
Q56_Monster

nateman_doo

Dude, get a dental pick.  You would be surprised what an indispensable tool it will be for you.


Great advice.  thanks.

I wish you could make money instead of spend money doing this stuff.....


Wanna buy a micro block?  :P

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#5215
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/11 19:36:23 (permalink)
nice....they still have dual boards laying around...haha

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5216
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 20:47:58 (permalink)
Man, I can't catch a break...Now my 1st pci-e slot won't work.  Hangs at 25.  I put the same card in another slot and it boots fine.  All the jumpers for the pci-e slots are on too.

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5217
johnksss
CLASSIFIED Member
  • Total Posts : 3567
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re:Get It Colder II 2010/05/11 20:59:46 (permalink)
check for water...

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#5218
Q56_Monster
CLASSIFIED Member
  • Total Posts : 2229
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re:Get It Colder II 2010/05/11 21:19:31 (permalink)
No water...haven't been sub-zero for a week.  Have just been running GPU's on air.  Now all of a sudden 1st slot won't work. 

Mobo: Asus Rampage VI Extreme CPU: i9-7980XE
GPU: RTX 3090 KPE
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA Supernova 1600 T2 OS: All of them
Monitor: 48" LG CX OLED  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 



#5219
pwnzorz
iCX Member
  • Total Posts : 346
  • Reward points : 0
  • Joined: 2009/11/15 05:51:06
  • Status: offline
  • Ribbons : 0
Re:Get It Colder II 2010/05/11 21:26:16 (permalink)
anyone got the Mushkin enhanced DDR3 2000mhz 8-8-7-24
http://www.newegg.com/Product/Product.aspx?Item=N82E16820226117&cm_re=mushkin_ddr3_2000-_-20-226-117-_-Product


Maybe you could provide some suggestions on latency, they are running at 1747mhz currently, i want to lower latencies. 920@4.6 219x21 EVGA e760

also curious the tRFC should be at? its currently at 74
post edited by pwnzorz - 2010/05/11 21:31:29

Evga E760 Classified
920 D0 @ 4.4ghz
6GB Mushkin Redline 2000mhz
Radeon 5970 @ 950/1250
Radeon 5870 @ 950/1250
Dell 27inch U2771
Dell 30inch 3007
Koolance Exos 2.5 
Intel X-25M G2 80GB SSD
300GB Western Digital Veliocraptor
750GB Western Digital Caviar


#5220
Page: << < ..171172173174175.. > >> Showing page 174 of 396
Jump to:
  • Back to Mobile