overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/13 21:00:42
(permalink)
nateman_doo
I am running 221 tonight. Got some great runs, but nothing completed yet...
Well Nate... do a quick 20 runs of LinX at 25000 and give me some competition.  Well not really quick... takes just over one hour... at least you will know when it passes that it's not your cpu keeping your 3dMark from going thru... that LinX is a tough one... harder than Prime95.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/13 21:35:11
(permalink)
Haven't completed a full vantage run with it yet... stability is not my game.. just need it stable enough to pass a 30 second CPU test, and 15 second phys-x test. As for the GPU's, the difference between 823, and 830 is pass, or fail. But now its damn near 1 am. I am out for the night...
post edited by nateman_doo - 2009/11/13 21:49:37
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/13 21:52:06
(permalink)
nateman_doo
Haven't completed a full vantage run with it yet... stability is not my game.. just need it stable enough to pass a 30 second CPU test, and 15 second phys-x test.
As for the GPU's, the difference between 823, and 830 is pass, or fail.
Good luck on your benches tonight Nate... I know I'm going to need some. I thought is was going to pass last night and I was all ready to press the control/print screen in about 30 more seconds when I got BSOD 9C... not sure if that is Vcore or VTT... I think it is Vcore so I will up it one more notch and give it a go in about 10 more minutes after my chiller pulls down as far as it can.
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/13 23:11:12
(permalink)
BTW... I didn't paint my new Swiftech Apogee XT white. As long as I pull the block when it's still frozen... No water gets on the board. I guess this ok until I get to my permanent system (semi that is... it's never permanent... lol!) You can see one of my Thermoelectric Chillers in there... I hoping to get those things nicely tucked away in a case with enough power and radiators to have a subzero system all contained in a full tower without having to get a Mountain Mods or custom case. Although I have to admit... I am thinking about making my own case that will accommodate 2 to 4 140mm quad rads... I have a few ideas running thru my head.   
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/13 23:50:09
(permalink)
Whew!!! 221 bclk   This is on an EVGA X58 SLI LE... man I miss my Classified!
|
cranium r
iCX Member
- Total Posts : 488
- Reward points : 0
- Joined: 2007/07/26 15:54:04
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2009/11/14 00:14:40
(permalink)
thats playig with danger. got to watch for condensation or the party is over
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/14 00:26:43
(permalink)
LOL... thanks for the advise.
What life without a little excitement???
Remember your in the "Get It Colder" thead... we have been there and done that... I have had plenty enough close calls before when I wasn't paying attention on an un-insulated board... and got a little too cold.
I'm not a stranger to condensation or frost... I'm done for the night and already removed the waterblock from the board while it was still frozen... so no water will ever get anywhere except my bench.
Don't get me wrong... I appreciate you looking out for me... I just didn't feel like taking the time to insulate this SLI LE board for subzero for tonight's runs... as I'm just waiting for my Classified to get back in town.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/14 09:31:09
(permalink)
damn dude... 221 stable? that is good stuff! I have no idea how long mine would last, but maybe today I will give it a shot.
How cold is the liquid pumping? I dont get lower then 13°F pumping it through the 295's and the CPU.
ALso lucky for you the humidity is quite low.. its a fine frost on your block. If it was more humid, you probably would have more problems, but im guessing around 40-48% humidity?
|
wizzard1709
iCX Member
- Total Posts : 346
- Reward points : 0
- Joined: 2009/01/22 10:06:27
- Status: offline
- Ribbons : 0
Re:Get It Colder......2
2009/11/14 09:31:41
(permalink)
I had today my first dice session. It is big fun even if it was a short pleasure. I ordered 2 kg ( 20 ltr) but I got 200gr  .  After 3 runs the little portion of dice was gone but at least I moved up to 44k in Vantage http://service.futuremark.com/compare?3dmv=1596107  Next time hopefully more dice and maybe better result 
Banchetto 101, Tt 1500,Xeon W 3540, 3 x 2 GB Dominator GT 2000MHz CL8, P6T6 REVOLUTION, 570 GTX Sonic, Xonar STX Essence, SSDs: A-Data 128GB XPG SX 900+Corsair X128 GB, Veloci Raptor 300GB, WD Black 1TB/ S.T.R.I.K.E. 7,RAT 7
EVGA X58 SLI Classified 759, Silverstone 1200W, i7 965X, 3 x 2GB Dominator 1600, 2 x Evga 295 GTX with Aquagraf, SSD Verbatim 128GB, Lian LI P80, diNovo Edge, Mamba
Other fun stuff: Hailea water chiller. Koolance CPU-LN
My Affiliate Code 6LQ5H2AR45
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/14 19:16:31
(permalink)
There is a dry ice place about 7 miles from my house....
|
lchialeux
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2008/01/09 00:43:45
- Location: Québec , Canada
- Status: offline
- Ribbons : 0
Re:Get It Colder......2
2009/11/14 19:22:12
(permalink)
overclocker333
LOL... thanks for the advise.
What life without a little excitement???
Remember your in the "Get It Colder" thead... we have been there and done that... I have had plenty enough close calls before when I wasn't paying attention on an un-insulated board... and got a little too cold.
I'm not a stranger to condensation or frost... I'm done for the night and already removed the waterblock from the board while it was still frozen... so no water will ever get anywhere except my bench.
Don't get me wrong... I appreciate you looking out for me... I just didn't feel like taking the time to insulate this SLI LE board for subzero for tonight's runs... as I'm just waiting for my Classified to get back in town.
+1 
→Case √ Microcool Banchetto 101 →Cooling System √ Homemade waterchiller →Power Supply √ TT Toughpower Cable Man 1200W →Motherboard √ EVGA 790i SLI FTW DIGITAL PWM →Memory√4g Patriot DDR3 2000@1600 7-7-7-20-1T →Hard Disks √ 2 x WD VelociRaptor 300Go raid-0 →CPU √ Intel C2D E8600 E0 @ 5.002 GHz →GPU`s √(3) EVGA GTX280 SLI@810/1620/1332 →OS √ M$ Windows 7 64-Bit →Bench √ Vantage score P35247 →Bench √ 3DMark06 score 23,365 →Bench √ Super Pi 1M score 9.22s
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/14 21:43:57
(permalink)
nateman_doo
damn dude... 221 stable? that is good stuff! I have no idea how long mine would last, but maybe today I will give it a shot.
How cold is the liquid pumping? I dont get lower then 13°F pumping it through the 295's and the CPU.
ALso lucky for you the humidity is quite low.. its a fine frost on your block. If it was more humid, you probably would have more problems, but im guessing around 40-48% humidity?
-10*c coolant.... I would have gone to my normal max of -13*c but I need to clean the dust out of my condenser It was actually raining and about 35*F/60% humidity in my garage... I just let it frost up and took the block off after the run since this is just a temporary SLI LE bench rig until I get my Classified back. All the frost just melts onto the bench and no harm done.
post edited by overclocker333 - 2009/11/14 21:47:50
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/14 21:46:52
(permalink)
nateman_doo
ALso lucky for you the humidity is quite low.. its a fine frost on your block.
LOL that was at the begining of the run... I thought about taking some pics at the end of the 1 hr run where you could hardly read "Swiftech" on the block.
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/14 21:50:36
(permalink)
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/14 21:52:47
(permalink)
nateman_doo
There is a dry ice place about 7 miles from my house....
FYI... Wal-Mart sells dry ice.... I have run it in a slush bucket... fun to watch it boil!
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/14 21:57:25
(permalink)
I don't think DICE in a chiller is such a good idea.
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/14 22:05:10
(permalink)
nateman_doo
I don't think DICE in a chiller is such a good idea.
It was Dice in a 5 Gallon bucket for me and did no better than regular ice as I was just starting to play with the whole chilled water thing. To use dice in a chiller... I think they use acetone... scary!!!
|
wizzard1709
iCX Member
- Total Posts : 346
- Reward points : 0
- Joined: 2009/01/22 10:06:27
- Status: offline
- Ribbons : 0
Re:Get It Colder......2
2009/11/15 04:07:31
(permalink)
Yes overclocker 333 my cards are cooled by chilled water.
Banchetto 101, Tt 1500,Xeon W 3540, 3 x 2 GB Dominator GT 2000MHz CL8, P6T6 REVOLUTION, 570 GTX Sonic, Xonar STX Essence, SSDs: A-Data 128GB XPG SX 900+Corsair X128 GB, Veloci Raptor 300GB, WD Black 1TB/ S.T.R.I.K.E. 7,RAT 7
EVGA X58 SLI Classified 759, Silverstone 1200W, i7 965X, 3 x 2GB Dominator 1600, 2 x Evga 295 GTX with Aquagraf, SSD Verbatim 128GB, Lian LI P80, diNovo Edge, Mamba
Other fun stuff: Hailea water chiller. Koolance CPU-LN
My Affiliate Code 6LQ5H2AR45
|
wizzard1709
iCX Member
- Total Posts : 346
- Reward points : 0
- Joined: 2009/01/22 10:06:27
- Status: offline
- Ribbons : 0
Re:Get It Colder......2
2009/11/15 04:10:26
(permalink)
nateman_doo
There is a dry ice place about 7 miles from my house....
quite funny Nate, I will think about it next time.
Banchetto 101, Tt 1500,Xeon W 3540, 3 x 2 GB Dominator GT 2000MHz CL8, P6T6 REVOLUTION, 570 GTX Sonic, Xonar STX Essence, SSDs: A-Data 128GB XPG SX 900+Corsair X128 GB, Veloci Raptor 300GB, WD Black 1TB/ S.T.R.I.K.E. 7,RAT 7
EVGA X58 SLI Classified 759, Silverstone 1200W, i7 965X, 3 x 2GB Dominator 1600, 2 x Evga 295 GTX with Aquagraf, SSD Verbatim 128GB, Lian LI P80, diNovo Edge, Mamba
Other fun stuff: Hailea water chiller. Koolance CPU-LN
My Affiliate Code 6LQ5H2AR45
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 12859
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
Re:Get It Colder......2
2009/11/15 09:14:40
(permalink)
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/15 09:20:28
(permalink)
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/15 09:29:34
(permalink)
Man... where's Hallowen... he has posted once in the new forum. Things aren't the same with out "H"!!!
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/15 09:33:12
(permalink)
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2009/11/15 13:02:25
(permalink)
ah, so that's what you did that you didn't want to say...lol
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/15 19:50:48
(permalink)
Yup, I turned Prestone... into soda  I am having a good benching night... and sad to say bedtime is approaching. Got back up to 46.2K. Just doing the run over and over again, hopefully will get a lucky run. I shouldn't go to bed... cause this is what happend last time, Lost 46K's for almost a month.
|
overclocker333
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2009/03/09 20:48:28
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2009/11/15 19:54:05
(permalink)
nateman_doo
Yup, I turned Prestone... into soda
I am having a good benching night... and sad to say bedtime is approaching. Got back up to 46.2K. Just doing the run over and over again, hopefully will get a lucky run.
I shouldn't go to bed... cause this is what happend last time, Lost 46K's for almost a month.
ROFL!!!
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/15 20:44:45
(permalink)
ehh well... going to bed. Guess I wave goodbye to 46K's for another month, the power bills are becoming astronomical. I am surprised the Feds haven't set up shop in vans outside my house thinking were growing pot or something. They would die if it was just Vantage runs that makes the house lights DIM.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 12859
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
Re:Get It Colder......2
2009/11/16 17:06:14
(permalink)
The house lights don't really dim do they? The light that's on the same circuit as my rig will flicker when I boot up but it hasn't ever dimmed lol.
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
jstfrkiks
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2008/10/03 09:21:48
- Status: offline
- Ribbons : 0
Re:Get It Colder......2
2009/11/17 08:01:34
(permalink)
OH i can confirm that his lights dim, you don't notice it to much while its running but when the vantage run ends and the chiller gets shut down for the night the lights all of a sudden get brighter you know !!!
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 11233
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2009/11/17 20:58:17
(permalink)
yes, the lights dim. I left a vantage run going and went in to check on my wife a while ago, and she said when I got in the room, "the lights just got brighter" I joked and said my computer prolly crashed. sure enought I go back in... and Calico locked up. No vantage runs for at least a week... IM A DADDY NOW!!!  My little girl!
|