trs32505

There you have it for now. Now you guys run along and play.

Ya.... I'm playing with a new LinX stability run that might be sweet!!!  I will know in 20 more minutes.

DrNip

Your puttin up some nice #'s for Windows 7 MrNatural!  Making me want to dust off my F1EE pot <---damn, i should have known..and see what I can come up with.

Try running the 64K 3 times or so then do a 32M run.  Also if you are running dual cards don't.  Run with one, preferably a smaller GPU like a 8600gt or something and without the GPU driver installed. 

dice or ln2?

overclocker333

trs32505

There you have it for now. Now you guys run along and play.

Ya.... I'm playing with a new LinX stability run that might be sweet!!!  I will know in 20 more minutes.

oh yeah??

im thinking of trying this as well..just waiting on a few more results from a friend...then it's either jump in...or wait a bit longer.

hummmm, i think oc333 must of crashed in the last few minutes of his run...been like 2 hours now....

Arg!!!  I just noticed... only 4 threads!!!  Man... cursed by those saved bios settings... back to the garage!

I'm running into some kind of bug on the high clock speeds with LinX.  

"Shock-the-Monkey" and I have both noticed this...  there seems to be some sort of memory leak in all the later versions of LinX.   It takes way too long on the first pass (250 sec)with very low gflops (35)... and as you continue... longer for each pass with less  and less gflops as you continue until you get a pop up that message from windows wanting to shut down stuff to create more memory. 

I noticed AWallGuy seemed to run his ok at 4.7ghz... but Monkey and myself both have this problem.

Any ideas anyone???

I'm working on a 760 right now... my 759 needs a new cpu socket. 

johnksss

so far...i have seen quite a few of those boards out doing the 760/761...

but isn't STM Board a 760?

Yep. Mines a 760. Seems everything I try with LinX gives me either a x50 error or x0a error. Real pain. Yet I can run Prime with no problem.

Ahhh... that's better! 

4.75 ghz ht on!


 
 
I'm not sure why LinX would run slower with HT on???   1.5 hrs to run this!   I will have to check and see if I drop the cpu speed down if LinX runs faster... all  my other4.5 and 4.6 runs were around 1hr 5mins except that HT off run which was less than 1hr.
 
Going for 4.8 ghz now. 

johnksss

40 gflops....

Ya... what's up with that... all I did was turn on HT... everything else was the same!

johnksss

man, i have no clue. i want to run with the big dogs again...i may have to grab an extreme...

 
Blah!!!  I bought the W3570 for $595 on a tip from "Monkey"!  They say Xeon is better binned and across most of the forums... I think you see better Xeon clocks than 975's.. plus that neat little Xeon sticker. 

overclocker333

johnksss

man, i have no clue. i want to run with the big dogs again...i may have to grab an extreme...

 
Blah!!!  I bought the W3570 for $595 on a tip from "Monkey"!  They say Xeon is better binned and across most of the forums... I think you see better Xeon clocks than 975's.. plus that neat little Xeon sticker. 

Yeah I remember when those were that price at ebay.  Still kicking myself over it as they were a dynamite batch #.  I just thought the deal was too true to be good.  In the past I have watched as well as gotten burned over deals that were like this.

Word to the wise, just hold out on getting a extreme chip for 2-3 months to see if the 6 core Gulftown drops like they are saying it will.  It is killing all benches at the time.

SuperPi is where its at.  2D FTW!

WOW I found a GULFTOWN on Ebay!!!

http://cgi.ebay.com/Intel...aaa1101#ht_1410wt_1165



(I think it's illegal to sell an ES chip though, I just thought it was cool)

pretty close to the same price as the 975/965 when they first came out as well.