My GPU is sitting at 90 degrees farenheit right now and all three fans are still off. What should i do?

Hi! good morning. it will run at 75C 

Hi people,
 
I seem to have opposite problem after the firmware upgrade to my 1080Ti FTW3 via PXOC, I believe it's the same fw upgrade mentioned in this thread earlier.
 
I do run PXOC in tray all the time (it sets OC to my card) and use automatic fan control through it, but no matter what kind of fan control I select (Quiet vs Aggressive) my card now stays really loud no matter what I do.
I figured the PXOC misreports the fan speeds to software controller somehow, e.g. the Power auto-fan control sets the slider really low (same as Memory), but Power actually runs at 4,300 rpm (can see it after clicking "P" in PXOC) while Memory fan runs at 1,200 rpm ... the actual GPU core fan sits at 980 rpm at that time, all temps are in 30-40C range, I checked fan curves and it doesn't make any sense to me at all. Using Slave vBIOS for obvious reasons.
 
Is there any solution to this problem?
 
EDIT:
I am running a standalone PXOC.
 
Also, an interesting observation, I just manually maxed out all fans to 100% and now PXOC reports their speeds respectively (gpu, power, memory) as 3,300ish; 4,300ish; 3,300ish - is that normal?

Sajin

feniks
Also, an interesting observation, I just manually maxed out all fans to 100% and now PXOC reports their speeds respectively (gpu, power, memory) as 3,300ish; 4,300ish; 3,300ish - is that normal?

Not sure. Have you asked tech support?

yup, sent them a question regarding this just this evening.
 
the best joke is that it suddenly went away on its after like 3-4 days of driving me nuts LOL ... I noticed when it did go away the PXOC stopped reporting GPU temp in tray (icon just disappeared), so I closed it and started again and all is normal still and temp icon sits in tray, weird.
 
It's something with PXOC software and/or vbios, maybe evga tech support knows more, it's beyond me.

Mustang3789
can someone help me I have the same problem no fans no sensors the card is completely off except for the backplate leds I have done everything on this post and still nothing I have The new FTW3 12 GHz.

Click the following button inside precision xoc...
 

 
Post a picture of what it says.

Mustang3789
THis is how it looks

This should fix it.

Mustang3789
like I said I tried that several times already and still nothing happens

You said you tried everything in this thread. My instructions are different.

Mustang3789
ok my bad I'm a bit frustrated right now, I tried that while I was looking for a solution, apparently it doesn't work for me 

This may get the card working.

Mustang3789
it says "this device its not supported"

Ok. Try the following...
 
#1 Uninstall precision xoc.
#2 Delete evga folder inside C:\Program Files (x86)
2b. Delete evga folder inside C:\Program Files (x86)\Steam\steamapps (only if using steam version)
#3 Shutdown your pc.
#4 Unplug psu from wall.
#5 Press & hold tower power on button for 30 seconds.
#6 Plug psu back into wall.
#7 Start pc.
#8 Install/Start XOC. XOC should update the mcu's on the card with new firmware that should resolve the problem.

You using the steam version or standalone version of xoc?

Time to contact evga 24/7 tech support... https://www.evga.com/about/contactus/

Hope your new card has zero issues.

Mustang3789
Hopefully!! And Thanks for the help, funny thing is I haven’t use the computer for more than 4 days since I bought the card. And boom failed I guess PYTHON doesn’t want me to go away from him lol

No problem. 

I’m waiting for the new card already but I wanted you guys to see this my card went crazy today..
https://www.dropbox.com/s...021%2058%20AM.mov?dl=0

coolant3000
Hi,
 
i have the same issue after i update my windows 10 to RS3 build 
and nothing not helping when windows starts before i log in to windows my car up to 67c and GPU clock to 1600
i even not log in to windows
i tried to install and uninstall drivers and OCX(stand alone) manual control working good
 
how to update FW on the card?
 
thanks
 

If I understand you correctly you updated Windows 10 to the Windows 10 Fall Creator's Edition is that correct? By the way there is no firmware update for the video card that I am aware of.
 
It sounds to me there is a driver problem somewhere. Uninstall OCX first. Then see if the temperatures are OK. If not then uninstall the NVIDIA drivers via the control panel. Make sure in the control panel that anything that says "NVIDIA" and is associated with the video driver is uninstalled. Then reinstall the video drivers again.