kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 13:48:16
(permalink)
tc0566
Well mb lights say graphics is dead and I get no signal.. Guess we know it's a bad card now.
You may want to try doing a MB clear CMOS.
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 13:51:40
(permalink)
Well forget that it's this finicky mb and ram ... Back in bios resetting my timings back to what I know is good. And yes those settings are perfect on my old 3080 and never had any issues till I got this 3080ti. But mb was stuck at vga and wouldn't boot. when I get back into my computer I'll upload the bsod screen.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU    
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 13:55:00
(permalink)
You're welcome to continue testing with XMP enabled, but most people would recommend disabling it and running the ram at JDEC for troubleshooting. XMP is considered an OC of course, and not guaranteed to be stable, specially on ryzen, even if it has passed some synthetic tests..
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 13:58:45
(permalink)
Yeah I set it back to 1t and it booted right up.  
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:06:14
(permalink)
The ram has been in this comp since 4/20/2020. The 3080 was installed in Dec. 2020. All that time no issues. Problems started with the install of this 3080Ti.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:47:31
(permalink)
Vid mem is the problem OCCT just popped all kinds of errors on a stress test. 
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:49:36
(permalink)
Not that it's a solution, but try moving the mem down -100 or 200 and see if the errors go away. If so, then probably is RMA time.
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:50:29
(permalink)
Set to full mem and she made it to 7 minutes then screen flashed and nothing but errors. And Mem is at JDEC right now because left everything at defaults after the bios flash.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:52:31
(permalink)
oh It's RMA time now screen just flashed off again for like 2 seconds. I think that stress test about finished it off.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:54:11
(permalink)
tc0566
Set to full mem and she made it to 7 minutes then screen flashed and nothing but errors. And Mem is at JDEC right now because left everything at defaults after the bios flash.
Progress! I'd declock the memory as far as it will go in X1 or AB and see what happens. The 3080 Ti I got last year would green screen at much over +600. It's also worth trying setting tdr delay at 8, which was a fix for the black screen issue.
post edited by kevinc313 - 2022/04/04 14:55:53
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10333
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:54:22
(permalink)
tc0566
GTXJackBauer
tc0566
kevinc313
tc0566
Yes I haver the latest bios. Did that before reinstalling windows.
Just to be clear - You loaded the EVGA Precision X1 software, ran it, had the card go into a firmware update, and then you uninstalled PX1?
Yes updated firmware and then did a fresh install of windows. This started when I went from a 3080 to this 3080 TI . Basically have same settings in game 3080 nice and smooth this thing a stuttering mess . Yes I have frame rate locked but even without the frame rate lock the stutters are even worse. It's unplayable without locking the framerates.
Can you test out any other game titles? If so, do you get the same result? If you do, I would contact EVGA for an RMA.
Yeah I probably will end up doing an RMA I even went to a new power supply. I am so fed up with this card. Problem is no card till it comes back from EVGA and lately their delivery times with UPS are crap. Last delivery from them got lost and it was a month before they would reship a damn mouse. What happens when they lose something this expensive, does it take them 6 months to reship it.
Sorry to hear about your shipping issues but if a product gets lost with the back and forth that is involved, it could take some time to get things squared away before getting a replacement so it's understandable. Either way, I think it's time to RMA since you've explained everything you've done so far points to the GPU being the culprit.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 14:58:36
(permalink)
Yeah the fact that in game once mem temps hit 72c things go downhill and now this vid mem stress test did this .. she's gone. now got to pull the hybrid kit and put it back stock. I'm calling EVGA and do a cross ship and explaining all this. Hopefully it get's things going a little quicker.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 15:11:26
(permalink)
Ok they are making me pay them for new thermal pads because it won't be in factory condition for $10 and shipping them USPS. But isn't there a thing on the forums about them not selling the pads?
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
EVGATech_DanielM
EVGA Tech Support
- Total Posts : 1132
- Reward points : 0
- Joined: 2017/07/07 19:01:01
- Status: offline
- Ribbons : 2
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 15:26:18
(permalink)
☄ Helpfulby Cool GTX 2022/04/05 06:38:08
We have been selling thermal pads through customer support since the launch of the 30 series.
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 15:30:51
(permalink)
EVGATech_DanielM
We have been selling thermal pads through customer support since the launch of the 30 series.
Except you don't list them anywhere on your site and only find out about it when you have to RMA and since it was the hybrid kit that I bought off your website that ruined the original pads, quite unfair of you to charge me for new ones.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
EVGATech_DanielM
EVGA Tech Support
- Total Posts : 1132
- Reward points : 0
- Joined: 2017/07/07 19:01:01
- Status: offline
- Ribbons : 2
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 15:37:14
(permalink)
☄ Helpfulby Cool GTX 2022/04/05 06:38:29
We do apologize but EVGA is not responsible for turning your card back to factory condition for RMA - we do not sell the pads on the website as we have multiple models and this is not something everyone needs as well so the demand for it is not enough to list on the store. We allow the disassembly of the GPU however it's up to you to send it back to us for warranty the way you originally received it.
post edited by EVGATech_DanielM - 2022/04/04 15:39:23
|
tattude69
iCX Member
- Total Posts : 499
- Reward points : 0
- Joined: 2013/04/21 15:30:52
- Location: NY
- Status: offline
- Ribbons : 7
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 16:03:23
(permalink)
Did the problem start after installing the Hybrid Kit? If so maybe try the gpu with stock cooler.
post edited by tattude69 - 2022/04/04 16:06:00
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 16:14:18
(permalink)
tattude69
Did the problem start after installing the Hybrid Kit? If so maybe try the gpu with stock cooler.
No I bought the Hybrid kit just to drop the temps hoping it would help with my issues. At the time I thought maybe it was thermal related. 400-HY-1988-B1 Ran OCCT again and this time got a BSOD. It definitely isn't going to get better. I'm getting tdr's every 5 minutes now. I won't be doing anymore gaming till I get a new one now.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
tattude69
iCX Member
- Total Posts : 499
- Reward points : 0
- Joined: 2013/04/21 15:30:52
- Location: NY
- Status: offline
- Ribbons : 7
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 16:56:43
(permalink)
Very sorry to hear. At this point it sounds like RMA is the only option
|
Donradeon
iCX Member
- Total Posts : 396
- Reward points : 0
- Joined: 2021/10/09 09:05:13
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/04 18:26:26
(permalink)
So many horror stories on here. I'm glad I didn't keep my EVGA 3070. My 360 CLC has terribly loud fans and my supernova PSU sounds like barber clippers under load.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 04:10:45
(permalink)
Sajin
tc0566
Vid mem is the problem OCCT just popped all kinds of errors on a stress test.
Mmmm VRAM errors. Gotta love that. 
Got to love the fact that after talking me into buying new thermal pads and also telling me that RMA is approved at the end of the day. I still don't don't have an approval for the RMA. At the time I called them my card was in stock. Will it be by the time they approve this RMA?
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 05:38:21
(permalink)
tc0566
Sajin
tc0566
Vid mem is the problem OCCT just popped all kinds of errors on a stress test.
Mmmm VRAM errors. Gotta love that.
Got to love the fact that after talking me into buying new thermal pads and also telling me that RMA is approved at the end of the day. I still don't don't have an approval for the RMA. At the time I called them my card was in stock. Will it be by the time they approve this RMA?
They keep some extra stock for RMAs from what I've seen in the past.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31251
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 06:39:40
(permalink)
RMA inventory is separate from Retail
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 07:53:57
(permalink)
This is my second time having an issue with EVGA and their customer service. I ordered an X20 mouse from them. They showed a tracking number was created and that's as far as tracking went. UPS never picked it up. Tracking clearly showed this. They made me wait over a month before they would do anything. It took 6 weeks to actually get the mouse. I am really starting to lose all faith in this company.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
justin_43
CLASSIFIED Member
- Total Posts : 3086
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 7
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 07:55:48
(permalink)
ASUS RTX 4090 TUF OC • Intel Core i7 12700K • MSI Z690 Edge WiFi • 32GB G.Skill Trident Z • EVGA 1600T2 PSU 3x 2TB Samsung 980 Pros in RAID 0 • 250GB Samsung 980 Pro • 2x WD 2TB Blacks in RAID 0 • Lian-Li PC-D600WB EK Quantum Velocity • EK Quantum Vector² • EK Quantum Kinetic TBE 200 D5 • 2x Alphacool 420mm Rads LG CX 48" • 2x Wasabi Mango UHD430s 43" • HP LP3065 30" • Ducky Shine 7 Blackout • Logitech MX Master Sennheiser HD660S w/ XLR • Creative SB X-Fi Titanium HD • Drop + THX AAA 789 • DarkVoice 336SE OTL
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 08:04:41
(permalink)
justin_43
You are also going need a tube of thermal putty as well as the pads.
https://www.evga.com/products/product.aspx?pn=M047-10-000003
I bought the replacement thermal pads and only realized after I got them I needed putty as well. They did not remind me when I set up the RMA.
I'm not sending them anymore money. I've got k5 Pro thermal paste for that. And I'm sure they will be tearing the card apart and destroying the pads and thermal paste anyway as I'm as sure they are fully aware as well. They still haven't approved the RMA.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
justin_43
CLASSIFIED Member
- Total Posts : 3086
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 7
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 08:15:18
(permalink)
tc0566
justin_43
You are also going need a tube of thermal putty as well as the pads.
https://www.evga.com/products/product.aspx?pn=M047-10-000003
I bought the replacement thermal pads and only realized after I got them I needed putty as well. They did not remind me when I set up the RMA.
I'm not sending them anymore money. I've got k5 Pro thermal paste for that. And I'm sure they will be tearing the card apart and destroying the pads and thermal paste anyway as I'm as sure they are fully aware as well. They still haven't approved the RMA.
I hear ya. It's pretty crazy that they want 2 separate $10 purchases to send in an RMA. I really feel like some putty should come with the replacement pad kit at least. But I would at least mention you are going to use your own paste so they won't reject the RMA outright. Especially since paste is not putty and probably won't fill the gap between the VRMs and the cooler. It would be much more expensive and time consuming to have to send it in twice and end up buying the putty anyway.
ASUS RTX 4090 TUF OC • Intel Core i7 12700K • MSI Z690 Edge WiFi • 32GB G.Skill Trident Z • EVGA 1600T2 PSU 3x 2TB Samsung 980 Pros in RAID 0 • 250GB Samsung 980 Pro • 2x WD 2TB Blacks in RAID 0 • Lian-Li PC-D600WB EK Quantum Velocity • EK Quantum Vector² • EK Quantum Kinetic TBE 200 D5 • 2x Alphacool 420mm Rads LG CX 48" • 2x Wasabi Mango UHD430s 43" • HP LP3065 30" • Ducky Shine 7 Blackout • Logitech MX Master Sennheiser HD660S w/ XLR • Creative SB X-Fi Titanium HD • Drop + THX AAA 789 • DarkVoice 336SE OTL
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 08:43:16
(permalink)
justin_43
tc0566
justin_43
You are also going need a tube of thermal putty as well as the pads.
https://www.evga.com/products/product.aspx?pn=M047-10-000003
I bought the replacement thermal pads and only realized after I got them I needed putty as well. They did not remind me when I set up the RMA.
I'm not sending them anymore money. I've got k5 Pro thermal paste for that. And I'm sure they will be tearing the card apart and destroying the pads and thermal paste anyway as I'm as sure they are fully aware as well. They still haven't approved the RMA.
I hear ya. It's pretty crazy that they want 2 separate $10 purchases to send in an RMA. I really feel like some putty should come with the replacement pad kit at least. But I would at least mention you are going to use your own paste so they won't reject the RMA outright. Especially since paste is not putty and probably won't fill the gap between the VRMs and the cooler. It would be much more expensive and time consuming to have to send it in twice and end up buying the putty anyway.
The K5 is made for vrm just as their putty states it is for VRM. If it was an issue then they should have brought it up while I was on the phone. They should know if it's needed if they are the ones you contact for RMA. The Hybrid kit only comes with pads and a small amount of Thermal paste for the GPU chip. I didn't use it anyway and I can put that back on the GPU chip. The pads are what's on all the VRM's.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
justin_43
CLASSIFIED Member
- Total Posts : 3086
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 7
Re: GPU load stays around 50 to 60% spikes to 85%. And game runs like garbage on a 3080Ti
2022/04/05 08:51:19
(permalink)
tc0566
justin_43
tc0566
justin_43
You are also going need a tube of thermal putty as well as the pads.
https://www.evga.com/products/product.aspx?pn=M047-10-000003
I bought the replacement thermal pads and only realized after I got them I needed putty as well. They did not remind me when I set up the RMA.
I'm not sending them anymore money. I've got k5 Pro thermal paste for that. And I'm sure they will be tearing the card apart and destroying the pads and thermal paste anyway as I'm as sure they are fully aware as well. They still haven't approved the RMA.
I hear ya. It's pretty crazy that they want 2 separate $10 purchases to send in an RMA. I really feel like some putty should come with the replacement pad kit at least. But I would at least mention you are going to use your own paste so they won't reject the RMA outright. Especially since paste is not putty and probably won't fill the gap between the VRMs and the cooler. It would be much more expensive and time consuming to have to send it in twice and end up buying the putty anyway.
The K5 is made for vrm just as their putty states it is for VRM. If it was an issue then they should have brought it up while I was on the phone. They should know if it's needed if they are the ones you contact for RMA. The Hybrid kit only comes with pads and a small amount of Thermal paste for the GPU chip. I didn't use it anyway and I can put that back on the GPU chip. The pads are what's on all the VRM's.
I only mentioned it because it happened to me. They never mentioned anything on the phone to me either. Anyway, good luck with your RMA.
ASUS RTX 4090 TUF OC • Intel Core i7 12700K • MSI Z690 Edge WiFi • 32GB G.Skill Trident Z • EVGA 1600T2 PSU 3x 2TB Samsung 980 Pros in RAID 0 • 250GB Samsung 980 Pro • 2x WD 2TB Blacks in RAID 0 • Lian-Li PC-D600WB EK Quantum Velocity • EK Quantum Vector² • EK Quantum Kinetic TBE 200 D5 • 2x Alphacool 420mm Rads LG CX 48" • 2x Wasabi Mango UHD430s 43" • HP LP3065 30" • Ducky Shine 7 Blackout • Logitech MX Master Sennheiser HD660S w/ XLR • Creative SB X-Fi Titanium HD • Drop + THX AAA 789 • DarkVoice 336SE OTL
|