roadphantom2
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2023/02/09 07:26:44
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/22 09:42:45
(permalink)
Question?????
What is this Bios update supposed to fix??? I heard through a Jays Two Cents video (see link below) that Intel is sending out Bios updates in regards to motherboard voltage settings to its 13 gen and new CPUs I am hoping that despite EVGA being out of the Motherboard market would at least take advantage of this and help those of us that dont want burn up a $600.00 CPU.
|
Cpt.Derrek
New Member
- Total Posts : 72
- Reward points : 0
- Joined: 2010/05/05 21:34:10
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/22 09:56:34
(permalink)
roadphantom2
Question?????
What is this Bios update supposed to fix??? I heard through a Jays Two Cents video (see link below) that Intel is sending out Bios updates in regards to motherboard voltage settings to its 13 gen and new CPUs I am hoping that despite EVGA being out of the Motherboard market would at least take advantage of this and help those of us that dont want burn up a $600.00 CPU.
This is exactly the intention of this bios update. It contains the 0x12B (final... hopefully) fix from intel.
13900k Delided, unleashed, and undervolted EVGA Z690 Classified 64Gb G.Skill 6400Mhz CL32 EVGA RTX 3080ti Hydrocopper @2Ghz
|
Comeup101$
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2023/01/19 14:36:35
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/28 09:37:43
(permalink)
Having issues after microcode update 2.16, the computer will only boot from a complete shutdown, If I do a restart I get a code d6. I've tried everything I can think of including reinstalling graphics card. I've reinstalled update 3 times still same issue. If I flashback to 2.09 everything works fine. The same issue happened with version 2.12.
2.09 is the only version that works normal. I've worked on this for days and I left a email with tech support but they never responded. My system consist of Nvidia 4070ti, i5 13600k with Z690 Classified along with 64GB Trident Z5 6000 DDR5. I want to be safe I might flashback to 2.09 If I can't figure this out. It feels minor but driving me nuts. Any specific help would really be appreciated.
BLew
|
rulik006
Superclocked Member
- Total Posts : 111
- Reward points : 0
- Joined: 2018/12/16 04:40:25
- Status: offline
- Ribbons : 1
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/29 09:02:45
(permalink)
Comeup101$
Having issues after microcode update 2.16, the computer will only boot from a complete shutdown, If I do a restart I get a code d6. I've tried everything I can think of including reinstalling graphics card. I've reinstalled update 3 times still same issue. If I flashback to 2.09 everything works fine. The same issue happened with version 2.12.
2.09 is the only version that works normal. I've worked on this for days and I left a email with tech support but they never responded. My system consist of Nvidia 4070ti, i5 13600k with Z690 Classified along with 64GB Trident Z5 6000 DDR5. I want to be safe I might flashback to 2.09 If I can't figure this out. It feels minor but driving me nuts. Any specific help would really be appreciated.
BLew
I've seen this bug with Radeon and 2.12 bios so it's just a board/bios bug, and it will not be fixed anyway
|
Comeup101$
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2023/01/19 14:36:35
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/29 20:23:36
(permalink)
rulik006
Comeup101$
Having issues after microcode update 2.16, the computer will only boot from a complete shutdown, If I do a restart I get a code d6. I've tried everything I can think of including reinstalling graphics card. I've reinstalled update 3 times still same issue. If I flashback to 2.09 everything works fine. The same issue happened with version 2.12.
2.09 is the only version that works normal. I've worked on this for days and I left a email with tech support but they never responded. My system consist of Nvidia 4070ti, i5 13600k with Z690 Classified along with 64GB Trident Z5 6000 DDR5. I want to be safe I might flashback to 2.09 If I can't figure this out. It feels minor but driving me nuts. Any specific help would really be appreciated.
BLew
I've seen this bug with Radeon and 2.12 bios
so it's just a board/bios bug, and it will not be fixed anyway
Yes, that's the feeling I get, I called EVGA customer service and the rep said it could possibly be the video card, but I don't think so, if that was the case why does the video card work with version 2.03 and 2.09 without issues. I called MSI and they said it was the motherboard. The blame game!!!! I don't overclock and I never have instability issues, all I do is flight simulation and my system is plenty powerful for that! Just trying to be on the safe side. I did a 10 plus hour flight last night monitoring the CPU and the CPU never went over 1.241 volts and that was only on core1 all other cores stayed around 1.227 volts... BLew
|
ty_ger07
Insert Custom Title Here
- Total Posts : 16582
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 271
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/30 04:01:42
(permalink)
Out of curiosity, does enabling or disabling secure boot affect your D6 issue?
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2436
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 42
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/30 11:41:58
(permalink)
Finally got to test this bios. So far, it looks like voltages have actually dropped a pinch even on the same OC settings I was using, which means power and thermals are down too, but it remains stable through CPU-Z, CB23, CB24, CPU-Profile, and a bunch of graphics benchmarks I threw at it just to test it in game-like loads. Scores are all within the margins of before too. So far so good (only a couple hours of testing, but looks good after several specific tests).
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
EVGATech_ChrisB
EVGA Tech Support
- Total Posts : 1911
- Reward points : 0
- Joined: 2007/05/14 16:19:27
- Status: online
- Ribbons : 1
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/30 12:18:54
(permalink)
Hi Comeup101$, You are within warranty, and I show that you have never done an RMA on the product. We can help you with warranty if you think it is the motherboard, but this is not a common issue. Comeup101$
rulik006
Comeup101$
Having issues after microcode update 2.16, the computer will only boot from a complete shutdown, If I do a restart I get a code d6. I've tried everything I can think of including reinstalling graphics card. I've reinstalled update 3 times still same issue. If I flashback to 2.09 everything works fine. The same issue happened with version 2.12.
2.09 is the only version that works normal. I've worked on this for days and I left a email with tech support but they never responded. My system consist of Nvidia 4070ti, i5 13600k with Z690 Classified along with 64GB Trident Z5 6000 DDR5. I want to be safe I might flashback to 2.09 If I can't figure this out. It feels minor but driving me nuts. Any specific help would really be appreciated.
BLew
I've seen this bug with Radeon and 2.12 bios
so it's just a board/bios bug, and it will not be fixed anyway
Yes, that's the feeling I get, I called EVGA customer service and the rep said it could possibly be the video card, but I don't think so, if that was the case why does the video card work with version 2.03 and 2.09 without issues. I called MSI and they said it was the motherboard. The blame game!!!!
I don't overclock and I never have instability issues, all I do is flight simulation and my system is plenty powerful for that! Just trying to be on the safe side. I did a 10 plus hour flight last night monitoring the CPU and the CPU never went over 1.241 volts and that was only on core1 all other cores stayed around 1.227 volts...
BLew
|
Comeup101$
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2023/01/19 14:36:35
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/30 17:17:11
(permalink)
Thank you Chris,
I just ordered new HDMI 2.1 and DisplayPort 1.4 cables, The DisplayPort cable I'm using is the one that came with my Alienware OLED AW3423 DFW but I had the same issue with my old monitor. That will be the last troubleshoot I'll do.
If It doesn't work I will do a RMA.
If a replacement board or fix is needed I will report back after installing.
BLew
|
ty_ger07
Insert Custom Title Here
- Total Posts : 16582
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 271
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/30 20:45:16
(permalink)
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
|
Comeup101$
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2023/01/19 14:36:35
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/30 22:31:11
(permalink)
ty_ger07
Blew me off.
I guess I did, my apologies LOL I did not try secure boot, This has been happening from day one after I finished the build. I began with a no CPU bios install. I had to find the correct bios because the first few did not work which was very frustrating. I never had a 12th Gen processor which probably would of worked on the first try. I didn't see a reason to try secure boot but maybe I will give it a try. BLew
|
knightrider
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2008/02/18 21:09:05
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/31 10:05:40
(permalink)
xXKingOfHellXx
I enabled Intel DTT again for the newest Bios version since they still haven't confirmed if they will officially support it.
Any chance you can modify the kingpin bios to enable APO or point me to how you did it?
post edited by knightrider - 2024/10/31 10:07:46
|
chasreno
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2020/10/06 16:23:49
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/31 10:21:09
(permalink)
Question? All... feed back on install results on this (Z690 GEN13) Bios Beta UPDATE? LOVE TO KNOW.
|
xXKingOfHellXx
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2022/09/26 08:58:29
- Status: offline
- Ribbons : 1
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/31 12:20:34
(permalink)
knightrider
xXKingOfHellXx
I enabled Intel DTT again for the newest Bios version since they still haven't confirmed if they will officially support it.
Any chance you can modify the kingpin bios to enable APO or point me to how you did it?
I could modify it for you, but since I don't have a KINGPIN board, you would have to test it to see if it works.
CPU: Intel Core i7-13700K CPU Cooler: ARCTIC Liquid Freezer II 420 Motherboard: EVGA Z690 Classified RAM: G.Skill Trident Z5 RGB 32 GB (2 x 16 GB) DDR5-6400 CL32 Memory (F5-6400J3239G16GX2-TZ5RK) SATA SSD: Samsung 870 EVO 1 TB NVME SSD: SK Hynix P41 2 TB HDD: WD Red Plus 3 TB (WD30EFRX) GPU: XFX Speedster MERC 319 AMD Radeon™ RX 6900 XT Limited Black Gaming 16 GB Case: Lian Li LANCOOL III PSU: EVGA SuperNOVA 850 P6 UPS: APC BGM1500
|
knightrider
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2008/02/18 21:09:05
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/31 14:29:43
(permalink)
xXKingOfHellXx
knightrider
xXKingOfHellXx
I enabled Intel DTT again for the newest Bios version since they still haven't confirmed if they will officially support it.
Any chance you can modify the kingpin bios to enable APO or point me to how you did it?
I could modify it for you, but since I don't have a KINGPIN board, you would have to test it to see if it works.
Id be willing to test.
|
xXKingOfHellXx
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2022/09/26 08:58:29
- Status: offline
- Ribbons : 1
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/31 15:09:16
(permalink)
CPU: Intel Core i7-13700K CPU Cooler: ARCTIC Liquid Freezer II 420 Motherboard: EVGA Z690 Classified RAM: G.Skill Trident Z5 RGB 32 GB (2 x 16 GB) DDR5-6400 CL32 Memory (F5-6400J3239G16GX2-TZ5RK) SATA SSD: Samsung 870 EVO 1 TB NVME SSD: SK Hynix P41 2 TB HDD: WD Red Plus 3 TB (WD30EFRX) GPU: XFX Speedster MERC 319 AMD Radeon™ RX 6900 XT Limited Black Gaming 16 GB Case: Lian Li LANCOOL III PSU: EVGA SuperNOVA 850 P6 UPS: APC BGM1500
|
bruwleaf
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2024/10/16 19:35:53
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/10/31 19:51:47
(permalink)
So I have the 2.17 update because I have the KP z690 motherboard. I've used my EVGA 3070 to in it and found no problems. I have a EVGA 3090 which is my main card and still no problems. We also have the same CPU. What can say is to undervolt your 13600k so it doesn't fry if you choose to stay on a older bios. My only other opinion is to try it with xmp off and make sure you're not overclocking anything, so default settings with xmp off. Just keep anything with overclocking off maybe or most likely I'm wrong but I've seen others with your board using the same hardware as well as myself tested it and had no issues. You could have a corrupt bios update too possibly I just don't know I'm not an engineer through evgas bios team only Chris can help you.
|
Comeup101$
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2023/01/19 14:36:35
- Status: offline
- Ribbons : 0
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/11/02 04:55:23
(permalink)
☄ Helpfulby Cool GTX 2024/11/02 06:03:25
Well, I feel so small! good news I just received my HDMI cable and DisplayPort cable and had no boot issues with either cable with microcode bios version 2.16. I've been dealing with this boot issue since I've bought the board and the whole time it was my cables. I never before tried HDMI, it worked but at only 100hz because my display is HDMI2.0.
I then tried the new DisplayPort Cable1.4 and it worked perfectly!!!!!@165hz.
You would think that Dell would give good cables with a product as expensive as a Alienware OLED panel. Never again will I use the cables in the box! Lesson learned
Mahalo for all the help and suggestions
BLew
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30987
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: BETA BIOS for Z690 0x12B Microcode Update & ME Firmware Update - 10/10/2024
2024/11/02 06:04:24
(permalink)
Comeup101$
Well, I feel so small! good news I just received my HDMI cable and DisplayPort cable and had no boot issues with either cable with microcode bios version 2.16. I've been dealing with this boot issue since I've bought the board and the whole time it was my cables. I never before tried HDMI, it worked but at only 100hz because my display is HDMI2.0.
I then tried the new DisplayPort Cable1.4 and it worked perfectly!!!!!@165hz.
You would think that Dell would give good cables with a product as expensive as a Alienware OLED panel. Never again will I use the cables in the box! Lesson learned
Mahalo for all the help and suggestions
BLew
Thanks for posting the update. Yep, sometimes it is the little things that get you Good to see you got it working smoothly with new video cables 
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|