Hi,
I just installed " EleetX1_1.0.12.0". The software installed a firmware update (MCU...?) and 1.0.13 of EleetX1. I just like to know for what that firmware update was. 
 
- Thanks
 

EVGATech_LeeM
As always, please leave your feedback and let us know if you run into any issues.

I  only changed the RGB of my Z690 with ELEET X1.

After that, I had a BSOD with critical process died. It happened, after setting the software to Default - ended and restarted. It's uninstalled now. I also performed a system reset with a recovery to fully delete the app, and it's kernels. Which seems to be the firmware update, I first asked for.
 

zippytek
any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

Yes.  I also know at least one new feature they're looking to add in, but not sure about the ETA.

zippytek

EVGATech_LeeM

zippytek
any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

Yes.  I also know at least one new feature they're looking to add in, but not sure about the ETA.

thanks Lee, hope to see it soon. if y'all want to sell me a z790 while i wait, i'll PM you my CC# lol

im guessing you tried the 13900k and 13600k and no dice with the z690 yet?

Is the raptor lake issue that it will only launch as a black screen?  Because that is all ELEETX1 will do for me.  I tried both version 1.0.12 and 1.013, and both will launch, but will not let me do anything with the buttons on the bottom, and only shows a black screen.   I have tried clean installs of ELEET, I have disabled the core isolation and VBS. 

zippytek
Yes, the frame of the app loads but no error messages and just black inside the app frame. Same for 1.0.12 and 1.0.13

If anyone needs a temporary workaround, xtu will work so long as you have the Intel ME drivers for the board installed. ME needs to be enabled in bios as well

Wasn’t fun but it worked well enough. Managed an 8ghz valid on z690 dark with 13900K:
https://hwbot.org/submiss...3900k_(8p)_8002.23_mhz

 holy crap! That's awesome!

redteamgo

zippytek

EVGATech_LeeM

zippytek
any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

Yes.  I also know at least one new feature they're looking to add in, but not sure about the ETA.

thanks Lee, hope to see it soon. if y'all want to sell me a z790 while i wait, i'll PM you my CC# lol

im guessing you tried the 13900k and 13600k and no dice with the z690 yet?

yesterday i ran 13600K on z690 apex (2022 rev, with good mem channels) and ran ycruncher stable 7400 C32 2T for the entire session. Could run a bit unstable at 7600 C32 2T but didn't spend too much time trying to stabilize when 7400 was rock solid. latest apex bios. so it's definitely a bios issue here with z690 dark and raptor lake. looking forward to testing the fixed bios soon

zippytek

Talon2020
https://www.youtube.com/watch?v=pXgCGWVZcfQ
 
Seems Lummis version of EleetX1 is working just fine, but we won't have access to his version..

...or z790 dark 

 Well the version # is different from what we have now so I'm leaning towards version.

1.0.13.9 is here for those of us on z690 and 13th gen

I've been harassing support and they told me. I just needed the unicorn vomit RGB gone.

EvgaUser2711201
So ELEET X1 v1.0.12 isnt supported with the 2.03 dark bios/ 12900k? I get a pop up saying up saying check the log file. 
 
Tried using ELEET X1 BETA v1.0.13.9 and it doesn't open. Only runs in the task manager.
 
https://imgur.com/a/ZIkhDbS 

Try uninstalling ELEET, go into AppData > Local > EVGA_Co.,Ltd, and remove any folders that start with something like EleetX.exe_Url....  Then reinstall ELEET X1 and try again. 

i would like to add this fan control, RGB settings compatible with patriot's rgb(now its cant sync), and setting for disable rgb when screen went out
 
PS can someone tell me how disable backlight when pc is off? dark mode in bios disabling only led white diods, evga and z690 classified still highlighted