New Updates for X299 Motherboards today.  Early weekend present for those of you who have been waiting for the Adaptive Vcore / AVX throttling issue to be resolved:
 
BIOS 1.25 (E299 Dark) / 1.25 (E297 FTW K) / 1.18 (E296 Micro ATX 2) /1.26 (E295 Micro) Updates 

• Update CPU Microcode to 6A08 (SKL-X) and 3003 (CCL-X)
  
• Fix PerCore voltage mapping issue for several CPUs

 

---

​
 
Windows Installation

• Download the correct .zip file below for your motherboard:        

         151-SX-E299-KR - EVGA X299 Dark - v1.25
         142-SX-E297-KR - EVGA X299 FTW K - v1.25
         121-SX-E296-KR - EVGA X299 Micro ATX 2 - v1.18
         131-SX-E295-KR - EVGA X299 Micro ATX - v1.26

• First go into your BIOS and load defaults, save and exit
• Close all open programs.
• Go into the folder where you unzipped this package and double-click update.bat
• Press Y to start the flash process
• DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
• After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
• NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

  
BIOS Installation

• Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
• Reboot the machine and go into the system BIOS
• From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
• Select the .bin file you wish to flash.

 
Please let me know if anyone runs into problems with this update.  Thanks!

thanks for the updated BIOS

cdc-951
Will be get the new BAR/support like Asus boards are doing for z490/ SAM 
  Resizable BAR (Base Address Register)


https://forums.evga.com/Will-be-get-the-new-BARsupport-like-Asus-boards-are-doing-for-z490-m3165163.aspx

I've seen this thread.  I'm still waiting for a response from our MB team.

dmann304
So what is the real purpose of this Bios? there is no more CPU's atm, and settings here, seem stable. 
Is this gonna make things more speedy? and hopefully pass up the K series CPU's?

Updates the Micocode to fix the AVX-512 issue I had mentioned to you on my other posts... amongst other things. 

I do remeber mentioned, what Avx issue was it? cuz it seems to work ok here.

Oh, this could be a big fix, i did get a 1090xe so that will be in the works too.  Amazing, since i been at 5ghz stable now, but this
might add more umph
 
That article you posted is over a year and a half old, and has been many bios updates since then. So excatly was wrong with avx?
and i have been running handbrake for quite some time , even with prior CPU upgrades, since the 7800X, to 9800x, to the 10980x i
am getting Wed.

This broke OC robot, or I discovered an interesting bug when upgrading from 1.23 (never got around to 1.24) on my X299 FTW K and 10940X.

1. Set BIOS defaults and save/reboot, load windows, flash this BIOS.
2. Set whatever boot options needed - in my case, RAM XMP and disabling onboard sound and LAN. Save profile and reboot.
3. Use OC robot to find per core max, save and reboot to BIOS, save profile at the same slot with a different name, reboot.
4. Use OC Robot to find all core max, save and reboot to BIOS.
5. Now see that while the cores show a multiplier, in my case 49, that doesn't reflect the top, middle reading on the screen - 41 in my case. Windows reports the same.

It was thinking that I was changing from my per core OC robot results when I swapped to a 48 multiplier for all core per the save and reboot page. Also, voltage seemed to be at a default 1.1V. Quite weird.

Still ignores VRM Fan (PWR) setting on cold boots.  I have it set to 20% and have to reboot after A0 code before it picks it up. X299 FTW-K

great ! i've done 2 support ticket for my x299 micro 2 in 2020 for the core per core mapping and the bios is here ! let's try it !

Thanks for the info LeeM, much appreciated!

Thanks for your continuous support, appreciate it. 🙏👍