Windows 10 loves to Insist on drivers, even when they do not work ...... to stop Win 10 follow the steps below
Also, have you powered down your PC, removed All Power -- unplug PSU, monitor, printer, powered USB hubs ....... hold start button 30 seconds to discharge any capacitors ? Plug it all back in and boot ...
Turning OFF in MB BIOS: Fast boot & sometimes even Safe boot can help till issue is sorted
Graphics device driver error code 43 (support.microsoft.com)
excerpt:
Windows stopped your device because it reported problems. To fix it, try the following:
1) Select the
Start button, then in the search box next to Start, type
device manager and select
Device Manager from the list of results.
2) Find the problematic device in the list (it will often have a yellow exclamation point icon next to it).
3) Press and hold (or right-click) the name of the device, and select
Properties. In Properties, select the
Driver tab, select
Roll Back Driver, then follow the steps. If the button is unavailable, that means there's no driver to roll back to.
4) Select
Uninstall device and then select
Uninstall.
5) At the top of the list of devices in Device Manager, press and hold (or right-click) the name of your PC, then select
Scan for hardware changes. This reinstalls the device driver.
6) To see if this fixed the problem, press and hold (or right-click) the name of the device again and select
Properties. On the
General tab, under
Device status, you should see
This device is working properly. If you don’t see this message, refer to the documentation that came with the device or contact the manufacturer.