CyberGeek99
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2021/05/18 08:26:48
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/23 03:53:27
(permalink)
Hi Jacob, MY GPU: Part Number: 24G-P5-3987-KR Description: EVGA GeForce RTX 3090 FTW3 ULTRA GAMING, 24G-P5-3987-KR, 24GB GDDR6X, iCX3 Technology, ARGB LED, Metal Backplate Can you send me the latest Graphics VBIOS for my card (All types normal, overclock and XOC). Can I flash my GPU using Nvidia NVFlash? Let us know the release date of this BIOS please. Which BIOS version normal, overclock and XOC should you use and when? Are these BIOS support RBAR? The EVGA Precision X1 1.2.0.0 is giving me issues. Not updating Graphics VBIOS when I click on Update, Warning symbol next to my motherboard (message: Please check with your motherboard vendor). I have latest BIOS for my motherboard - Asus ROG Crosshair VIII Dark Hero (BIOS 3501). EVGA Precision X1 showing Resizable BAR : DISABLED. But it is enabled in MB BIOS. Note: My friend has the same system config as me only the GPU is different he has Nvidia RTX 3090 FE and the Precision Tool works for him (no problem to detect rbar, we also have same motherboard and motherboard bios and motherboard config matched up). Can I run XOC BIOS files with the stock air cooler on my GPU or will I need custom water cooling if I want the 500 watt? Can I run OC BIOS files with the stock air cooler on my GPU or will I need custom water cooling? How much watt will OC give me? Will I need to switch the GPU switch from normal > OC ? When will you fix the rbar detect issue with EVGA Precision X1? It still is not fixed with the latest release 1.2.0.0 When should we use the Normal to OC switch on the GPU? please advise. Thank you Mr Singh
post edited by CyberGeek99 - 2021/05/23 03:57:30
Attached Image(s)
|
chrisdglong
CLASSIFIED ULTRA Member
- Total Posts : 6473
- Reward points : 0
- Joined: 2008/11/08 15:21:25
- Status: offline
- Ribbons : 7
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/23 08:59:58
(permalink)
EVGA_JacobF
Important: If your motherboard has a setting for CSM, please disable this BEFORE installing this update.
How do I fix this if I installed the new BIOS before disabling CSM? It seems to me like this warning should be put in Precision. Not everyone got the information from this thread and I’m sure not everyone who did read this.
|
CyberGeek99
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2021/05/18 08:26:48
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/23 09:09:03
(permalink)
|
steve334x
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2021/05/02 14:31:37
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 09:27:20
(permalink)
gammatsunami
Thanks Ill try it
I have all those settings set in bios from nvidias official guide
update;
I just tried on the version you said, same thing. I click update, it closes then nothing happens. Maybe its something on my end
I have the same problem. I click on Update and then the X1 simply closes and nothing happens. Am I missing something? I have a 3080 XC3 ULTRA w/ Hybrid kit.
post edited by steve334x - 2021/05/24 09:38:04
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 11:38:48
(permalink)
steve334x
gammatsunami
Thanks Ill try it
I have all those settings set in bios from nvidias official guide
update;
I just tried on the version you said, same thing. I click update, it closes then nothing happens. Maybe its something on my end
I have the same problem. I click on Update and then the X1 simply closes and nothing happens. Am I missing something? I have a 3080 XC3 ULTRA w/ Hybrid kit.
The first few pages have a number of different updated vbios. Find the one for your card and try it.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU    
|
steve334x
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2021/05/02 14:31:37
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 11:48:41
(permalink)
tc0566
The first few pages have a number of different updated vbios. Find the one for your card and try it.
Unfortunately by the time somebody asked about my card (it's a 10G-P5-3885-KR with a Hybrid Kit), @EVGA_JacobF abandoned this topic. :( But I must say it's rather ridiculous that we have to dig buried forum forums just to find a VBIOS update. EVGA should post its BIOS images properly or fix its software.
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 12:12:58
(permalink)
steve334x
tc0566
The first few pages have a number of different updated vbios. Find the one for your card and try it.
Unfortunately by the time somebody asked about my card (it's a 10G-P5-3885-KR with a Hybrid Kit), @EVGA_JacobF abandoned this topic. :(
But I must say it's rather ridiculous that we have to dig buried forum forums just to find a VBIOS update. EVGA should post its BIOS images properly or fix its software.
Pretty sure on the 3080 FTW3 Ultra that the bios was fixed to work with or without a hybrid kit. It would explain why our cards have two fans that can no longer be manually be lowered past 33%. With hybrid you never want the fans to be turned off. But I have only seen this issue with the FTW3 Ultra. I would say try bios for your card listed in this thread and if fans work properly you are good. I know the issue of hybrid cards has come up in this thread before and Jacob did respond.
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
steve334x
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2021/05/02 14:31:37
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 13:49:46
(permalink)
Pretty sure on the 3080 FTW3 Ultra that the bios was fixed to work with or without a hybrid kit. It would explain why our cards have two fans that can no longer be manually be lowered past 33%. With hybrid you never want the fans to be turned off. But I have only seen this issue with the FTW3 Ultra. I would say try bios for your card listed in this thread and if fans work properly you are good. I know the issue of hybrid cards has come up in this thread before and Jacob did respond.
Well, I have a 3080 XC3 Ultra with a Hybrid Kit, not FTW3. The fans can definetly go to zero rpm on this card when not under load. Unfortunatelly there is no BIOS listed for my card (10G-P5-3885-KR) in this thread. If i knew where to find the BIOS I would gladly update it with nvflash as the Precision X1 does not work.
|
zhlnhn
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2021/04/19 12:10:11
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 13:57:42
(permalink)
bigdunka
I'm having an issue with mine as well, although I know that it should be working. I had a XC3 3080 on this machine, Resizable Bar was working just fine. I swapped it out last night for a XC3 3090 Hybrid and put the 3080 in my wife's machine. However, the 3090 isn't working. I know the setting is on through my motherboard. I disabled, restarted, and reenabled it as well. Precision X1 has checks everywhere except for the MB. When I put it in, it immediately updated the BIOS on the GPU. The NVIDIA control panel is also showing that it is not enabled.
Thank you!
 
Did you find a solution? I have the exactly same issue. Same card and VBIOS version, PX1 says "check with motherboard vendor". I've enabled re-bar and 4G encoding in BIOS, really don't know what's wrong here.
|
tc0566
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2012/03/05 16:14:55
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 14:13:53
(permalink)
zhlnhn
bigdunka
I'm having an issue with mine as well, although I know that it should be working. I had a XC3 3080 on this machine, Resizable Bar was working just fine. I swapped it out last night for a XC3 3090 Hybrid and put the 3080 in my wife's machine. However, the 3090 isn't working. I know the setting is on through my motherboard. I disabled, restarted, and reenabled it as well. Precision X1 has checks everywhere except for the MB. When I put it in, it immediately updated the BIOS on the GPU. The NVIDIA control panel is also showing that it is not enabled.
Thank you!
Did you find a solution? I have the exactly same issue. Same card and VBIOS version, PX1 says "check with motherboard vendor". I've enabled re-bar and 4G encoding in BIOS, really don't know what's wrong here.
Did you copy the nvml.dll file into EVGA folder? File is located in C:\Program Files\NVIDIA Corporation\NVSMI.
post edited by tc0566 - 2021/05/24 14:27:12
Use my Associate code to save money on your next purchase! K8KDH9WX5PDC7ZN And for all those that use it THANK YOU
|
mang1315
New Member
- Total Posts : 43
- Reward points : 0
- Joined: 2021/05/24 18:38:52
- Status: offline
- Ribbons : 0
Flagged as Spam (1)
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/24 18:44:44
(permalink)
Thanks! It works!!!!!! good!
|
bigdunka
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/09/22 08:34:18
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/25 17:55:08
(permalink)
zhlnhn
bigdunka
I'm having an issue with mine as well, although I know that it should be working. I had a XC3 3080 on this machine, Resizable Bar was working just fine. I swapped it out last night for a XC3 3090 Hybrid and put the 3080 in my wife's machine. However, the 3090 isn't working. I know the setting is on through my motherboard. I disabled, restarted, and reenabled it as well. Precision X1 has checks everywhere except for the MB. When I put it in, it immediately updated the BIOS on the GPU. The NVIDIA control panel is also showing that it is not enabled.
Thank you!
Did you find a solution? I have the exactly same issue. Same card and VBIOS version, PX1 says "check with motherboard vendor". I've enabled re-bar and 4G encoding in BIOS, really don't know what's wrong here.
Nope. I gave up on it. It seems support for the Hybrid BIOS just isn't there. Hopefully, they eventually fix it, but it seems to not be on their priority list at the moment.
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/25 18:46:38
(permalink)
|
wtfscrigface
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/11/30 10:24:52
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/25 20:38:35
(permalink)
I heard that the 3070s bios update sets the power limit lower than the limit in the bios it was shipped with. Was this resolved recently?
I'd like to do the Rebar update on my 08G-P5-3755-KR
|
CorruptHope
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2021/05/26 00:44:08
- Status: offline
- Ribbons : 0
Flagged as Spam (1)
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 00:44:28
(permalink)
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 02:06:15
(permalink)
****scrigface
I heard that the 3070s bios update sets the power limit lower than the limit in the bios it was shipped with. Was this resolved recently?
I'd like to do the Rebar update on my 08G-P5-3755-KR
Yes, this was resolved shortly after the issue was reported.
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 06:18:33
(permalink)
@EVGA_JacobF
Dear Jacob,
would be possible for you to make collection of ALL Re-BAR vBIOS for 3090 as it seams there out more than one version of same card (OC program card etc.)
|
chrisdglong
CLASSIFIED ULTRA Member
- Total Posts : 6473
- Reward points : 0
- Joined: 2008/11/08 15:21:25
- Status: offline
- Ribbons : 7
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 07:02:45
(permalink)
EVGATech_LeeM
Hi everyone,
Please try this beta version of PX1 to help with the Resizable BAR: Disabled message, if you otherwise have all of the other requirements completed:
https://cdn.evga.com/software/EVGA_Precision_X1_1.2.0.1.zip
Thought that I would try it and see if maybe it fixed the crashing when clicking "update", but it crashed as well.
|
Alpha_Omega69
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2015/05/15 02:47:47
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 07:57:43
(permalink)
I am unable to update the vbios through precision as soon as I click update it tries to load then just turns off the program.
|
Alpha_Omega69
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2015/05/15 02:47:47
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 08:10:45
(permalink)
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 09:24:10
(permalink)
Alpha_Omega69
EVGA_JacobF
Hi Jacob, can you post the Resizable Bar VBIOS file for 24G-P5-3987-KR?
Is it possible to get the files for both the standard OC BIOS and also the XOC BIOS both with ReBAR support?
Thanks Jacob, it would be appreciated.
Normal: https://cdn.evga.com/bios/30Series/3987V94024280AD.zip
OC: https://cdn.evga.com/bios/30Series/3987K9402428027.zip
XOC: https://cdn.evga.com/bios/30Series/3987_OC_500W.zip
Hi Jacob the part number on my card is 24G-P5-3987-KR however whenever I try to update it tells me that no compatible display adapter has been found.
well your part number is not 3987 (forget stickers on the card or BOX) use GPU-Z it will tell you what is your board ID (visible in section Device ID) Note that revised card with PCB 1.0 are 3982 even when BOX and card itself states 3987. 
Attached Image(s)
|
utkeitarol
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2020/11/23 15:06:38
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 12:11:49
(permalink)
I know this has been answered, but what is the major advantage for resizable bar in real world applications?
|
JuanFrete
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/05/26 12:52:20
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 13:21:11
(permalink)
Hi evga, need some help here.. 08G-P5-3751-KR  - CSM disabled.
- 4G encoding enabled.
- re-bar enabled.
MoBo vendor says the MoBo and the drivers are compatible. updated 2021-04-22. PX1 won't update, it keeps crashing. I tried a lot of versions including the one EVGATech_LeeM linked. I don't know what else to do.
post edited by JuanFrete - 2021/05/26 13:24:37
|
CHOWCHi
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/12/11 15:37:59
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 13:38:46
(permalink)
I'm having same issue with x1 crashing when I try to update firmware. card is 3090 ftw3 ultra hybrid. I tried the 12.01 beta version as well as older with no change.. All bios settings are correct
post edited by CHOWCHi - 2021/05/26 13:43:05
Attached Image(s)
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 14:43:12
(permalink)
When does it crash? Do you get a prompt to start flashing the BIOS, or does it crash before that?
|
chrisdglong
CLASSIFIED ULTRA Member
- Total Posts : 6473
- Reward points : 0
- Joined: 2008/11/08 15:21:25
- Status: offline
- Ribbons : 7
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 15:18:49
(permalink)
The mouse icon switches to an hourglass for a few seconds, then it crashes.
|
JuanFrete
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/05/26 12:52:20
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 15:21:06
(permalink)
chrisdglong
The mouse icon switches to an hourglass for a few seconds, then it crashes.
same
post edited by JuanFrete - 2021/05/26 15:22:11
|
CHOWCHi
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/12/11 15:37:59
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 16:36:26
(permalink)
click "update", "you are about to flash your vbios", click "update". then crash as described above.
post edited by CHOWCHi - 2021/05/26 16:50:31
|
utkeitarol
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2020/11/23 15:06:38
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 16:36:57
(permalink)
Thank you for letting me know about the info. I wasn't sure if it helped or hurt, but it is by a per title basis. Thank you.
|
schizoid
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2007/02/01 17:46:03
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/05/26 17:58:44
(permalink)
I just ordered a 3080 FTW3 directly from EVGA (got in queue in September 2020!)-- are new products being shipped with the resizable BAR VBIOS or will I need to flash it?
|