EVGA

AnsweredEVGA X79 DARK WATERBLOCK *prototype finished!*

Page: << < ..2122232425.. > >> Showing page 25 of 38
Author
Post
Essentials Only Full Version
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/02/24 21:24:18 (permalink)
nateman_doo
The first video was plastic over the block.  Was that your "insurance policy" first?  To see if the position was good?  heh, smart ;)

Yeah, better safe than sorry, first trick I learnt when engraving odd shaped objects

SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#721
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/02/24 21:29:05 (permalink)
Acesi7
Nice one Sneaky. Was good to watch the video.
Just looking at the pictures above, it looks like there are some scratches on one of the Chipset blocks. In the middle of the large E on the right hand block. Is that just hair on the block?
These look amazing mate, can't wait to get a hold of them.



Yeah unfortunately, one of them has slight scratches on it (was there when I unboxed them) but don't fret,
I am going to put a fine hand linish on them so scratches and milling marks will be gone.
Don't worry, it will look even better.
 
http://en.wikipedia.org/wiki/Linishing
 
 

SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#722
Acesi7
iCX Member
  • Total Posts : 260
  • Reward points : 0
  • Joined: 2010/09/17 01:28:09
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/02/24 21:43:17 (permalink)
I really don't know what else to say but awesome.
 
Both Nateman_doo and Sneaky. Awesome, Awesome AWESOME work.

EVGA X79 Dark|Intel 3960X - OC'd to 4.6Ghz|3-way EVGA 780 Classified w/HydroCopper block and backplate
Corsair Dominator GT - 1600mhz C8|Sandisk Extreme 480gb|OCZ Vertex 4 512Gb|Seasonic X-1250|TJ-11
Max Keyboards NightHawk X8 Custom|Razer Ouroboros|Overlord Tempest 1440p 120hz Monitor
3D Mark - Firestrike 23362 (2nd PSU soon for better scores...)
#723
Acesi7
iCX Member
  • Total Posts : 260
  • Reward points : 0
  • Joined: 2010/09/17 01:28:09
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/01 22:46:54 (permalink)
Any update Sneaky?

EVGA X79 Dark|Intel 3960X - OC'd to 4.6Ghz|3-way EVGA 780 Classified w/HydroCopper block and backplate
Corsair Dominator GT - 1600mhz C8|Sandisk Extreme 480gb|OCZ Vertex 4 512Gb|Seasonic X-1250|TJ-11
Max Keyboards NightHawk X8 Custom|Razer Ouroboros|Overlord Tempest 1440p 120hz Monitor
3D Mark - Firestrike 23362 (2nd PSU soon for better scores...)
#724
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 00:03:57 (permalink)
resin is hardening right now, taking longer than expected,
they now only have a casting resin which is a 2 to 1 ratio mixture as opposed to
the old marine resin which had a more aggressive hardener that was 5 to 1.
I'll post pics when finished later tonight.

SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#725
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 00:11:37 (permalink)
Ok ok a teaser

post edited by iamSneaky - 2014/03/02 05:18:45

SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#726
Acesi7
iCX Member
  • Total Posts : 260
  • Reward points : 0
  • Joined: 2010/09/17 01:28:09
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 00:16:30 (permalink)
That red is perfect.
 
Really amazing stuff, can't wait to get my hands on these beauties. Any idea of the drying time?

EVGA X79 Dark|Intel 3960X - OC'd to 4.6Ghz|3-way EVGA 780 Classified w/HydroCopper block and backplate
Corsair Dominator GT - 1600mhz C8|Sandisk Extreme 480gb|OCZ Vertex 4 512Gb|Seasonic X-1250|TJ-11
Max Keyboards NightHawk X8 Custom|Razer Ouroboros|Overlord Tempest 1440p 120hz Monitor
3D Mark - Firestrike 23362 (2nd PSU soon for better scores...)
#727
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 00:46:41 (permalink)
The left over resin in the cup has already cured but the blocks I cannot
get too hot so they are taking longer, maybe another hour?
Yeah really lucked out with the red as it is the only red they have lol

SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#728
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 05:35:17 (permalink)
OK, finally done. Everything that could have gone wrong did tonight ... one of those days I hope to forget.
Good news and bad news, one of the Block sets came out great, the other not so great.
Being a new Epoxy resin I had not used before I thought it wise to fill the blocks in batches so I at least had a 50/50 chance
of getting one good batch, well I was right, got my mixtures right with one set but the other I put slightly to much
hardener in and the finish came out blotchy. Not to worry though, I will keep that set as I can fill them again when i have time.
Acesi7, you get the good set
Here are your blocks, you will notice that the red on the small engraving on the Chipset block is darker, that
is unavoidable, there is only so much red pigment I can mix with the epoxy and that engraving being so small,
it is not very deep so the darkness is that you can see the black Delrin through the epoxy.
I think it looks good though, makes the big E more prominent.
The photo's don't really do them justice, they look much better when in front of you.



SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#729
d.burnette
CLASSIFIED Member
  • Total Posts : 3508
  • Reward points : 0
  • Joined: 2007/03/08 13:19:32
  • Status: offline
  • Ribbons : 17
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 05:53:12 (permalink)
Man those look sweet!
Almost tempts a guy to get into full waterblock cooling :)

Don 
 
 
EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
 
 
 
 
 
 
 
 
 
 
#730
LucaJ
Superclocked Member
  • Total Posts : 144
  • Reward points : 0
  • Joined: 2013/11/12 06:22:39
  • Location: Florence, Italy
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 07:52:08 (permalink)
Hi nateman_doo,
 
Do you have any news about a next batch?
Iโ€™d like to buy a  chipset block  and a VRM block.
 
#731
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 08:47:23 (permalink)
People are going to think that EVGA is making them.  DEAD sexy.  Did you lap the surface?  Looks like it has a brushed/lapped texture.  The delrin looks almost like black anodized aluminum that has a brushed finish. 
 
Good man to give the better one to Ace.  I will be starting the current back around Tuesday.  Here is what I have been up to for the past week:
http://forums.evga.com/FindPost/2125209
 
All the copper & delrin arrived, and it has been cut to size on the bandsaw.  pics probably later today.  Now I am taking my 2 princesses (and my beautiful Queen) to Medieval Times.
 

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#732
Acesi7
iCX Member
  • Total Posts : 260
  • Reward points : 0
  • Joined: 2010/09/17 01:28:09
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 14:18:07 (permalink)
Sneaky that looks perfect, I honestly couldn't be happier. And thanks for giving me the better of the 2 and being open about it all. Really stand up thing to do.

Shoot us a text and we can arrange pickup. Happy to drop by Richmond today if you've got them on your person.

EVGA X79 Dark|Intel 3960X - OC'd to 4.6Ghz|3-way EVGA 780 Classified w/HydroCopper block and backplate
Corsair Dominator GT - 1600mhz C8|Sandisk Extreme 480gb|OCZ Vertex 4 512Gb|Seasonic X-1250|TJ-11
Max Keyboards NightHawk X8 Custom|Razer Ouroboros|Overlord Tempest 1440p 120hz Monitor
3D Mark - Firestrike 23362 (2nd PSU soon for better scores...)
#733
iamSneaky
iCX Member
  • Total Posts : 444
  • Reward points : 0
  • Joined: 2012/04/11 01:05:16
  • Location: Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/02 15:20:07 (permalink)
I will be in Richmond tomorrow, I'll call you tonight to discuss. ;-)

SS07:
Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII Extreme
EVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721D
EVGA Supernova P2 1600

 
Elite ID: BJBC3RMQSBKAR2ALRHN
 
#734
bluvert89
iCX Member
  • Total Posts : 435
  • Reward points : 0
  • Joined: 2011/02/07 11:40:17
  • Status: offline
  • Ribbons : 3
Re:EVGA X79 DARK WATERBLOCK 2014/03/05 15:48:51 (permalink)
Any new eye candy of the current batch in progress?
 
#735
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/03/06 05:33:36 (permalink)
I have the materials cut to size, but I haven't had the machine setup for the Darks yet.  Most likely I will have the Dark fixture plate bolted and indicated into the machine today. 

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#736
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/03/06 05:36:56 (permalink)
edit.
post edited by nateman_doo - 2014/03/06 09:37:03

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#737
LucaJ
Superclocked Member
  • Total Posts : 144
  • Reward points : 0
  • Joined: 2013/11/12 06:22:39
  • Location: Florence, Italy
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/06 06:45:32 (permalink)
Ok nateman_doo,
 
let us know when you have any news about the new batch!
I'm always interested in a  chipset block  and a VRM block.
#738
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/03/06 09:37:53 (permalink)
Let me finish this current batch ;)

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#739
EVGATech_MattM
EVGA Tech Support
  • Total Posts : 2247
  • Reward points : 0
  • Joined: 2009/11/18 09:34:00
  • Status: offline
  • Ribbons : 5
Re: EVGA X79 DARK WATERBLOCK *prototype finished!* 2014/03/07 08:50:23 (permalink)
Here is the blocks mounted. Doing some testing before mounting in the case and running the tubing but looks good so far.  Took 5 SLI links to get the right height and to link them all together.  I was about 2mm off height wise any way I cut it but I think it worked out well.
post edited by EVGATech_MattM - 2014/03/07 13:00:11

Attached Image(s)

#740
LucaJ
Superclocked Member
  • Total Posts : 144
  • Reward points : 0
  • Joined: 2013/11/12 06:22:39
  • Location: Florence, Italy
  • Status: offline
  • Ribbons : 0
Re: EVGA X79 DARK WATERBLOCK *prototype finished!* 2014/03/07 09:15:19 (permalink)
 
#741
d.burnette
CLASSIFIED Member
  • Total Posts : 3508
  • Reward points : 0
  • Joined: 2007/03/08 13:19:32
  • Status: offline
  • Ribbons : 17
Re: EVGA X79 DARK WATERBLOCK *prototype finished!* 2014/03/07 09:19:40 (permalink)
What a sweet setup!

Don 
 
 
EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
 
 
 
 
 
 
 
 
 
 
#742
bluvert89
iCX Member
  • Total Posts : 435
  • Reward points : 0
  • Joined: 2011/02/07 11:40:17
  • Status: offline
  • Ribbons : 3
Re: EVGA X79 DARK WATERBLOCK *prototype finished!* 2014/03/07 09:21:33 (permalink)
EVGATech_MattM
Here is the blocks mounted. Doing some testing before mounting in the case and running the tubing but looks good so far.  Took 5 SLI links to get the right height and to link them all together.  I was about 2mm off height wise any way I cut it but I think it worked out good.


Looks great, can't wait to get mine in.  Had a question on your setup Matt.  Noticed a couple things when test fitting some stuff on my dark 1) Does your I/O cover touch your backplate and 2) Did your mounting hardware(specifically the bottom right screw) rub against the socket lever?  I have an EK cpu block so might just be an issue with it.
#743
EVGATech_MattM
EVGA Tech Support
  • Total Posts : 2247
  • Reward points : 0
  • Joined: 2009/11/18 09:34:00
  • Status: offline
  • Ribbons : 5
Re: EVGA X79 DARK WATERBLOCK *prototype finished!* 2014/03/07 13:27:21 (permalink)
bluvert89
Looks great, can't wait to get mine in.  Had a question on your setup Matt.  Noticed a couple things when test fitting some stuff on my dark 1) Does your I/O cover touch your backplate and 2) Did your mounting hardware(specifically the bottom right screw) rub against the socket lever?  I have an EK cpu block so might just be an issue with it.



  1. It does but it was not an issue when I was testing and powering up the board with the GPU on air and the backplate on it.  I did not even notice at first when I was first fitting everything together. I could not say if other maker's blocks and backplates would have an issue however.
  2. The block is a Swiftech APOGEE HD and it clears the lever.  I used the default backplate that came with the board.  The block is gold instead of the standard black as this one is the Gold Plated Limited Edition version and it came out a few years ago however this is the first time I have used it.
#744
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re: EVGA X79 DARK WATERBLOCK *prototype finished!* 2014/03/08 02:51:50 (permalink)
Finally someone posts some pictures of the blocks!  I'd love to hear some before/after temps.

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#745
EVGATech_MattM
EVGA Tech Support
  • Total Posts : 2247
  • Reward points : 0
  • Joined: 2009/11/18 09:34:00
  • Status: offline
  • Ribbons : 5
Re: EVGA X79 DARK WATERBLOCK *prototype finished!* 2014/03/08 02:58:20 (permalink)
Mid-20s across the board using a live boot of Ubuntu if I recall correctly however not stressed it yet.  Probably will be in a weekend or two before I can get windows loaded and do a more comprehensive benchmarks and temp checks under load.
post edited by EVGATech_MattM - 2014/03/08 08:07:57
#746
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/03/11 12:48:00 (permalink)

Getting ready to start this batch.  A nice thing about a fixture plate, is it can be setup without even being on the machine. 
Bolt on, indicate, start cutting.

GTX 680 SR2  GTX 580 460 2WIN  P67/Z68  VOODOO5 6000 GTX 690 My CNC Z97 Stinger ASX 11 X79 DARK X99 CPU - nateman.doo@gmail.com
#747
bluvert89
iCX Member
  • Total Posts : 435
  • Reward points : 0
  • Joined: 2011/02/07 11:40:17
  • Status: offline
  • Ribbons : 3
Re:EVGA X79 DARK WATERBLOCK 2014/03/11 13:58:43 (permalink)
nateman_doo

Getting ready to start this batch.  A nice thing about a fixture plate, is it can be setup without even being on the machine. 
Bolt on, indicate, start cutting.




Awesome! Thanks for the update
#748
LiMiTeD_DiAvOlO
New Member
  • Total Posts : 84
  • Reward points : 0
  • Joined: 2013/11/07 03:15:53
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/03/11 16:26:47 (permalink)
Can't wait though I must admit my excitement for my build has been dulled a little since I cant find either of the power supplies I wanted anywhere, still though excellent work as always, this was much needed good news
#749
zoom314
New Member
  • Total Posts : 100
  • Reward points : 0
  • Joined: 2011/01/12 15:35:05
  • Status: offline
  • Ribbons : 1
Re:EVGA X79 DARK WATERBLOCK 2014/03/11 17:00:08 (permalink)
Nice blocks Nateman, I'm interested, just not this moment since I'm waiting for a check to come to Me, the time frame could be a month or so from now(or less, as I have no idea when It will come), is this too long a wait? (I live near Barstow California) I don't have an X79 Dark yet, but that will be taken care of in due time, blocks are harder to get so they come first, I'm also getting 1/2"ID 3/4"OD black hoses with appropriate black chrome/black sparkle fittings. And yes I have a paypal account. Oh and this would be for My 3rd PC, I crunch numbers for Seti@Home and so plain black is fine with Me since 5 570/580 cards will cover the block almost completely. Also how much is the pair of blocks?
post edited by zoom314 - 2014/03/11 17:27:05

AZZA 9000B full tower case, EVGA x79 DARK motherboard, Bios 2.13
Intel i7-4820K cpu @ 3.70GHz, Cooler Master Glacer 240L cpu cooler
1-BitFenix 200x30mm case fan, 2-Koolance 120x120x25mm 108cfm case fans, 1-AZZA 140mm fan
Corsair RED Vengeance 16GB (2x8GB) DDR3 1866
PNY LC GTX580
500GB WD Scorpio Black hdd, OCZ Rally2 4GB usb flash drive, Asus DVD-/+R DL burner
Silverstone ST1500 1500w psu, Windows 7 Pro x64 sp1, LG 20" Flatron W2053TX Monitor(1600x900)
#750
Page: << < ..2122232425.. > >> Showing page 25 of 38
Jump to:
  • Back to Mobile