eshati
New Member
- Total Posts : 30
- Reward points : 0
- Joined: 2006/11/14 07:56:23
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/05 12:12:22
(permalink)
|
sergmann
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2009/09/14 00:45:18
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/05 13:48:51
(permalink)
CPU signal is always at -54 even if everything has been reset to default 
|
expedision
CLASSIFIED Member
- Total Posts : 2202
- Reward points : 0
- Joined: 2007/02/21 08:17:04
- Location: In a galaxly far far away
- Status: offline
- Ribbons : 8
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/05 15:43:51
(permalink)
Governator
expedision
wcrf08
I'm about to change my Xeon W3520 champ for an i7 980x.
What bios do you guys recommend??
My Classified is the 759-A1.
Thank you.
If you do not use VT, then bios 49 is the best so far.
hmm I don't and my board was flashed to 49 right before I sold my 920. My 980X will be here shortly today 
Glad to see see you changed your mind again 
HAF 922 Win7 64 bit Classified 760 980X @ 4.5 24/7 Antec TPQ-1200 psu Evga GTX 470 TRI SLI Prolimatech Megahalem Mushkin Redlines 2000Mhz Intel X-25m G2 160Gb SSD Raptor 150 gb for storage 32" Toshiba 1920 x 1080p
|
chinamusic
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2010/03/26 02:08:47
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/05 16:01:08
(permalink)
expedision
wcrf08
I'm about to change my Xeon W3520 champ for an i7 980x.
What bios do you guys recommend??
My Classified is the 759-A1.
Thank you.
If you do not use VT, then bios 49 is the best so far.
I am using 49 with VT. I need to occasionally boot a virtual XP (using virtualbox) instance in order to access my company's VPN because it won't work with Windows Exploder 8. It's working fine for me. What issue are you having? Best,
|
freestylingford
Superclocked Member
- Total Posts : 188
- Reward points : 0
- Joined: 2007/12/02 22:35:13
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/05 17:09:08
(permalink)
You know me personally I have found no reason to change from s61b ...I dont like the dimm voltage issue but all you have to do is set it .3 lower to get it right other than that 4ghz stable everything works and no issues. Whats your reasons? Just curious.
10900k Asus Z490E 32GB GSkill 4100mhz 3090ftw ultra Enermax Maxtytan 1050w Platinum
|
expedision
CLASSIFIED Member
- Total Posts : 2202
- Reward points : 0
- Joined: 2007/02/21 08:17:04
- Location: In a galaxly far far away
- Status: offline
- Ribbons : 8
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/05 17:14:14
(permalink)
chinamusic
expedision
wcrf08
I'm about to change my Xeon W3520 champ for an i7 980x.
What bios do you guys recommend??
My Classified is the 759-A1.
Thank you.
If you do not use VT, then bios 49 is the best so far.
I am using 49 with VT. I need to occasionally boot a virtual XP (using virtualbox) instance in order to access my company's VPN because it won't work with Windows Exploder 8. It's working fine for me. What issue are you having?
Best,
Copied from the first page of this thread. "Updates VT to correct issue with not enabling on specific setups."
HAF 922 Win7 64 bit Classified 760 980X @ 4.5 24/7 Antec TPQ-1200 psu Evga GTX 470 TRI SLI Prolimatech Megahalem Mushkin Redlines 2000Mhz Intel X-25m G2 160Gb SSD Raptor 150 gb for storage 32" Toshiba 1920 x 1080p
|
cleancut
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2009/08/15 15:03:56
- Location: Indianapolis, IN
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 06:46:32
(permalink)
Great release, does what promised, will report back if I run into any issues...
Cc_
CPU: Intel Xeon X5660 w/ Swiftech H2O-220 Ultima XT (Apogee XT) Motherboard: eVGA x58 SLI LE w/ EK Full Cover Block Ram: Corsair Vengeance DDR3 1600mhz 24GB w/ Antec SpotCool Video: 2x GTX 570 w/ Full Cover Blocks in SLI GPU3: nVidia Geforce GT 720 Sound: Soundblaster X-Fi Titanium Fatality X-Ram pci-e HDTV-tuner: VisionTek ATi Theater HD650 Pro pci Add-On Card: Asus U3S6 USB-3.0/SATA-III controller Storage: 2x WD Blue 640GB in Raid0 + OCZ Synapse SSD Caching
|
Moltenlava
CLASSIFIED ULTRA Member
- Total Posts : 6302
- Reward points : 0
- Joined: 2008/04/14 04:57:22
- Status: offline
- Ribbons : 28
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 10:23:57
(permalink)
dmoheban
Anyone know if the Nahelem Turbo mode bug has been fixed for a 920 D0? I mean if I set Turbo mode on and Performance mode off will the multipliers still go crazy?
disabling CxE Function should stop this or you can disable Trubo Mode and use the 20x multiplier. This is only a bug if CxE Function being disabled doesnt stop it.
|
mrmuiz
New Member
- Total Posts : 76
- Reward points : 0
- Joined: 2007/03/07 12:34:32
- Status: offline
- Ribbons : 3
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 10:29:45
(permalink)
 With 49 i could reboot sometimes without removing the powercord , with 51 ..... no go al all.
EVGA x58 Classified 759 HAF932 i7-920 D0 Swiftec pump Heathkiller 3.0 12gb CorsairVengeance 1600mhz MSI GTX460 Coolermaster M1000 2x 1TB Western Digital 1x OCZ Vertex 2 SSD 60gb   
|
tonicab
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2009/06/26 10:21:12
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 15:01:51
(permalink)
Anybody with XMP memory Profiles? XMP Memory Profiles doesn't show in bios correctly and If I set XMP Profiles I get "FF" error. I don't know if the problem is MB, bios or memory. When I set XMP Profile, I can let other values like frecuences and voltages in auto, can't I? Or I must to change voltages, VTT, uncore,... I say it, because the bios should be able to set profiles without changing any other values of the MB, like memory voltages (1.65v) cpu voltages, frecuences, VTT, uncore,.. Regards.
post edited by tonicab - 2010/04/06 15:10:43
|
lcd1860nx
New Member
- Total Posts : 55
- Reward points : 0
- Joined: 2009/04/07 04:40:02
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 17:37:09
(permalink)
tonicab
Anybody with XMP memory Profiles?
XMP Memory Profiles doesn't show in bios correctly and If I set XMP Profiles I get "FF" error.
I don't know if the problem is MB, bios or memory.
When I set XMP Profile, I can let other values like frecuences and voltages in auto, can't I? Or I must to change voltages, VTT, uncore,...
I say it, because the bios should be able to set profiles without changing any other values of the MB, like memory voltages (1.65v) cpu voltages, frecuences, VTT, uncore,..
Regards.
I have the same problem. I also had to go all the way back to bios S22D to get the XMP profile to work again.
i7 920 EVGA x58 SLI Classified 759 Gigabyte HD5870SO Antec Signature 850 6x2GB Mushkin HP3-12800 WD RE4-GP 2TB times two Soundblaster Fatality Titanium Vista Ultimate 64 SP2
|
tfannon
iCX Member
- Total Posts : 345
- Reward points : 0
- Joined: 2006/01/10 23:55:37
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 19:37:05
(permalink)
@chinamusic: virtual box doesn't rely on VT being enabled. I am using it right now with 49 and VT off. A
- SB-2600k@4.6, Asrock Z77-Extreme4, 32GB, 2xRadeon 7970 Crossfire Dell 2714HM, Samsung 840 Pro, 2xCrucial M4 in RAID-0, Noctua 14, Thermaltake 750
- SB-2600k@4.6, EVGA Z68-SLI, 16GB, 2xGeforce 670 SLI 3x24 Dell 2407, Crucial M4, Noctua 12, Corsair 650
- iMac 27" 3.4ghz I7 SandyBridge, 12gb, Radeon 6970m, Intel 520 240gb SSD
- 2013 MacBook Pro w/Retina 13.3, 512SSD, 8GB
|
lam_das
iCX Member
- Total Posts : 266
- Reward points : 0
- Joined: 2009/06/07 17:34:53
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 19:40:31
(permalink)
tfannon
@chinamusic: virtual box doesn't rely on VT being enabled. I am using it right now with 49 and VT off. A
If you want to run 32-bit guest, yes, you don't. But if you want to run 64-bit guest, VT is needed even if you disable VT-x in the guest VM's settings.
EVGA X58 SLI Rev 1.1 i7 920 D0 LinX/Prime Stable 4.4(21x210) HT ON 1.3125vcore, +100mV, vDIMM 1.625v, Rest Auto OCZ Gold 6GB 1680 (2:8) 9 9 9 24 1T Prolimatech Megahalems (Push/Pull) Because of S3 issues: 21x196, Auto vcore, 2:8, 8-8-8-24-1T 12GB.
|
chizow
CLASSIFIED ULTRA Member
- Total Posts : 5355
- Reward points : 0
- Joined: 2007/01/27 20:15:08
- Status: offline
- Ribbons : 30
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 21:39:47
(permalink)
Good results with this one so far for me, the S3 Resume CL timing bug is indeed fixed, which is great news.  Still no fix for the PCIe bandwidth allocation where an x1 in Slot 2 or 4 drops Slot 1 and 3 to x8, at this point it probably won't be fixed.
Intel Core i7 5930K @4.5GHz | Gigabyte X99 Gaming 5 | Win8.1 Pro x64 | Corsair H105
2x Nvidia GeForce Titan X SLI | Asus ROG Swift 144Hz 3D Vision G-Sync LCD | 2xDell U2410 | 32GB Acer XPG DDR4 2800
Samsung 850 Pro 256GB | Samsung 840EVO 4x1TB RAID 0 | Seagate 2TB SSHD
Yamaha VSX-677 A/V Receiver | Polk Audio RM6880 7.1 | LG Super Multi Blu-Ray
Auzen X-Fi HT HD | Logitech G710/G502/G27/G930 | Corsair Air 540 | EVGA SuperNOVA P2 1200W
|
chinamusic
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2010/03/26 02:08:47
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/06 22:00:18
(permalink)
lam_das
tfannon
@chinamusic: virtual box doesn't rely on VT being enabled. I am using it right now with 49 and VT off. A
If you want to run 32-bit guest, yes, you don't. But if you want to run 64-bit guest, VT is needed even if you disable VT-x in the guest VM's settings.
Exactly. I occasionally run 64-bit Ubuntu Linux 9.10 as well. Also without VT, I believe you can't assign more than one processor to a guest. Best,
|
rusty725
Superclocked Member
- Total Posts : 159
- Reward points : 0
- Joined: 2006/11/24 22:56:12
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/07 00:57:48
(permalink)
can someone comment on overclocking with this bios ? compare to B or H versions if you can please.
|
schumi69
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2007/02/25 15:32:29
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/07 04:14:11
(permalink)
Went to update last night and it did not take and now I have to RMA the motherboard. :( at least EVGA has the best warranty in the biz and advanced RMA.
My System: ASUS Sabertooth Z77 i7 3770K @4.2 CORSAIR H100 (CWCH100) Extreme Performance Liquid CPU Cooler RAM G.SKILL Sniper series 16 GB 2 4x2 at 1866 EVGA GTX 680 SC Thermaltake toughpower 1200 watt
|
Yaboze
New Member
- Total Posts : 74
- Reward points : 0
- Joined: 2010/03/12 22:21:58
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/07 06:53:41
(permalink)
I am using Windows XP Mode from Microsoft with Windows 7 x64. When I used the 49 Bios, it would not work at all because it needs VT. The system detects the processor supports VT, but it sees it as "off". The MS tool that shows if you have VT shows this.
I flashed back to the bios right before 44/49 and VT works again. There may be other Virtual programs that don't need VT on the processor to work, those should be fine.
I am just waiting for a fix that allows VT and removes the double-pump on restart. Very annoying.
Intel i7 960 ∙ EVGA X58 X3 SLI ∙ 12GB G.Skill Ripjaws DDR3-1600 ∙ nVidia GTX 770 ∙ Intel 520 SSD ∙ Dell 2407WFP ∙ Corsair HX 1KW ∙ Windows 8.1 Pro
|
tfannon
iCX Member
- Total Posts : 345
- Reward points : 0
- Joined: 2006/01/10 23:55:37
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/07 08:25:54
(permalink)
so the cas delay on s3 resume is indeed fixed.
it also seems pretty stable.
i did encounter a reboot on 3rd s3 resume. is this a known issue?
- SB-2600k@4.6, Asrock Z77-Extreme4, 32GB, 2xRadeon 7970 Crossfire Dell 2714HM, Samsung 840 Pro, 2xCrucial M4 in RAID-0, Noctua 14, Thermaltake 750
- SB-2600k@4.6, EVGA Z68-SLI, 16GB, 2xGeforce 670 SLI 3x24 Dell 2407, Crucial M4, Noctua 12, Corsair 650
- iMac 27" 3.4ghz I7 SandyBridge, 12gb, Radeon 6970m, Intel 520 240gb SSD
- 2013 MacBook Pro w/Retina 13.3, 512SSD, 8GB
|
tonicab
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2009/06/26 10:21:12
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/07 09:40:03
(permalink)
lcd1860nx
tonicab
Anybody with XMP memory Profiles?
XMP Memory Profiles doesn't show in bios correctly and If I set XMP Profiles I get "FF" error.
I don't know if the problem is MB, bios or memory.
When I set XMP Profile, I can let other values like frecuences and voltages in auto, can't I? Or I must to change voltages, VTT, uncore,...
I say it, because the bios should be able to set profiles without changing any other values of the MB, like memory voltages (1.65v) cpu voltages, frecuences, VTT, uncore,..
Regards.
I have the same problem. I also had to go all the way back to bios S22D to get the XMP profile to work again.
My MB is the X58 SLi, and S22D is for Classified. However, I hope EVGA team can give us a bios without XMP problem, because I think EVGA is a great company and it is a shame new bios don't support XMP memory Profiles.
|
sipchen
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2010/04/01 11:34:08
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/07 13:26:56
(permalink)
How can I verify that my bios has been updated? I know this question has prolly been asked many times but I can't find any solution. Cpu-z doesnt tell.
Gigabyte G1. Sniper 5 | i7 4 770k @ 4.5Ghz |Corsair H100i | Corsair Vengeance Pro 16gb 1866MHz | EVGA GTX 780 Classified |
|
jnunez450r
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2008/05/20 16:27:56
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/07 14:25:19
(permalink)
Seems like I will stay with my S61J for now on this 930. Doing 4.2G with HT just fine at 1.30V
_________________________________ Core i7 920 3849B028 4.5Ghz @ 1.35V EVGA Classified e760 G SKILL Trident at 2053 Cas 8 1.65V EVGA GTX 470 SLI Mushkin Callisto 60GB SSD WD Caviar Black 500GB/640GB WD Black Water cooling: Apogee XT, EK FC 470, Swiftech MCP355 w/top, EK Full Cover mobo block, Black Ice GTX 360
|
tfannon
iCX Member
- Total Posts : 345
- Reward points : 0
- Joined: 2006/01/10 23:55:37
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/08 08:22:40
(permalink)
@sipchen:
How can I verify that my bios has been updated?
The initial boot screen will show the BIOS number. you may have to hit your pause key to see it.
- SB-2600k@4.6, Asrock Z77-Extreme4, 32GB, 2xRadeon 7970 Crossfire Dell 2714HM, Samsung 840 Pro, 2xCrucial M4 in RAID-0, Noctua 14, Thermaltake 750
- SB-2600k@4.6, EVGA Z68-SLI, 16GB, 2xGeforce 670 SLI 3x24 Dell 2407, Crucial M4, Noctua 12, Corsair 650
- iMac 27" 3.4ghz I7 SandyBridge, 12gb, Radeon 6970m, Intel 520 240gb SSD
- 2013 MacBook Pro w/Retina 13.3, 512SSD, 8GB
|
damndonzi
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2009/09/16 16:31:05
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/08 08:38:40
(permalink)
Hi All , I am having an issue with BIOS 51 on a 756 X58 Micro with corsair CM3X2G1600C9 12gb 1600 mem. After updating the BIOS to 51 from 44 I was unable to get the memory to run at 1600 using any of the setting that I know. I reverted back to BIOS 44 and the mem runs properly at 1600. is there something I am missing? here are the setting that I changed from BIOS default in both cases
XMP1 enabled
DIMM v 1.60 ( as per corsair for my specific mem)
speedstep enabled
these are the only changes I made and it works on 44 but not on 51. couls this be a bug?
|
loveordie
FTW Member
- Total Posts : 1708
- Reward points : 0
- Joined: 2007/12/17 13:41:46
- Status: offline
- Ribbons : 23
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/08 08:48:39
(permalink)
i9 7980XE @ 4.6 WC / ASUS Rampage VI OMEGA / M.2 960 Pro 1TB / 10TB WD RED Helium/ 64gb G.Skill Trident Z RGB F4-3000C14D / AORUS GeForce RTX™ 2080 Ti XTREME WATERFORCE WB 11G / Corsair Obsidian 500D SE Modded / ROG Thor 1200W
|
expedision
CLASSIFIED Member
- Total Posts : 2202
- Reward points : 0
- Joined: 2007/02/21 08:17:04
- Location: In a galaxly far far away
- Status: offline
- Ribbons : 8
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/08 09:37:14
(permalink)
damndonzi
Hi All , I am having an issue with BIOS 51 on a 756 X58 Micro with corsair CM3X2G1600C9 12gb 1600 mem. After updating the BIOS to 51 from 44 I was unable to get the memory to run at 1600 using any of the setting that I know. I reverted back to BIOS 44 and the mem runs properly at 1600. is there something I am missing? here are the setting that I changed from BIOS default in both cases
XMP1 enabled
DIMM v 1.60 ( as per corsair for my specific mem)
speedstep enabled
these are the only changes I made and it works on 44 but not on 51. couls this be a bug?
Put your memeory settings in manually instead of using the Xmp profile. It adds way to much Vtt voltage on any bios i have ever tried.
HAF 922 Win7 64 bit Classified 760 980X @ 4.5 24/7 Antec TPQ-1200 psu Evga GTX 470 TRI SLI Prolimatech Megahalem Mushkin Redlines 2000Mhz Intel X-25m G2 160Gb SSD Raptor 150 gb for storage 32" Toshiba 1920 x 1080p
|
Shockjockey
CLASSIFIED Member
- Total Posts : 4928
- Reward points : 0
- Joined: 2006/11/29 14:24:02
- Location: OHIO
- Status: offline
- Ribbons : 18
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/08 10:32:26
(permalink)
I caved in and flashed a few days ago.This bios seems more stable than 49.Running at 4.5 24/7 without a single crash.Still wish EVGA would fix the overvolting ram issue.
Asus Sabertooth x99 5930k (4.5ghz) 16gb Corsair DDR4 (3000) EVGA 1000w psu Zotac 980ti x 2 Samsung 850 pro 500 SSD HPLP3065 30in Monitor 2560x1600
|
rodymcamp
Superclocked Member
- Total Posts : 203
- Reward points : 0
- Joined: 2005/12/05 21:05:55
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/09 05:39:16
(permalink)
yeah I ended up just setting my ram to 1.61 and that seems to even it out.
pc1 Evga Classified bios s22d Intel Core I7 920@3.7ghz (no voltage adjustments) Corsair Vengence 24GB @ 8-8-8-19 T2 Evga gtx480x2 SLI OCZ Vertex2 120x2 raid0 Western Digital Caviar Black WD640 x2 raid0 HITACHI Deskstar 7K1000 Corsair HX1000 Corsair H50 Thermaltake Spedo Advance Package
|
lcd1860nx
New Member
- Total Posts : 55
- Reward points : 0
- Joined: 2009/04/07 04:40:02
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/10 06:27:40
(permalink)
expedision
damndonzi
Hi All , I am having an issue with BIOS 51 on a 756 X58 Micro with corsair CM3X2G1600C9 12gb 1600 mem. After updating the BIOS to 51 from 44 I was unable to get the memory to run at 1600 using any of the setting that I know. I reverted back to BIOS 44 and the mem runs properly at 1600. is there something I am missing? here are the setting that I changed from BIOS default in both cases
XMP1 enabled
DIMM v 1.60 ( as per corsair for my specific mem)
speedstep enabled
these are the only changes I made and it works on 44 but not on 51. couls this be a bug?
Put your memeory settings in manually instead of using the Xmp profile. It adds way to much Vtt voltage on any bios i have ever tried.
Putting in the memory settings manually does work but the bios should have the XMP settings work if it is an option. If it is not supposed to work then EVGA should remove that optional setting in bios.
i7 920 EVGA x58 SLI Classified 759 Gigabyte HD5870SO Antec Signature 850 6x2GB Mushkin HP3-12800 WD RE4-GP 2TB times two Soundblaster Fatality Titanium Vista Ultimate 64 SP2
|
tonicab
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2009/06/26 10:21:12
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 51 Released
2010/04/11 08:32:39
(permalink)
lcd1860nx
expedision
damndonzi
Hi All , I am having an issue with BIOS 51 on a 756 X58 Micro with corsair CM3X2G1600C9 12gb 1600 mem. After updating the BIOS to 51 from 44 I was unable to get the memory to run at 1600 using any of the setting that I know. I reverted back to BIOS 44 and the mem runs properly at 1600. is there something I am missing? here are the setting that I changed from BIOS default in both cases
XMP1 enabled
DIMM v 1.60 ( as per corsair for my specific mem)
speedstep enabled
these are the only changes I made and it works on 44 but not on 51. couls this be a bug?
Put your memeory settings in manually instead of using the Xmp profile. It adds way to much Vtt voltage on any bios i have ever tried.
Putting in the memory settings manually does work but the bios should have the XMP settings work if it is an option. If it is not supposed to work then EVGA should remove that optional setting in bios.
Of course. My opinion is the same than your opinion. XMP Profile should have to work in auto (not change any values, even voltages). However My memory doesn't work manually or with XMP Profile. 51 bios, 44 bios or other. I send my memory to RMA, but if the problem is not the memory I should have to pay sending and testing cost. I hope the problem is the memory. If it is not a memory problem, I will not buy EVGA products anymore.
|