Beaversqueeezer
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2011/10/19 17:26:22
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 04:50:38
(permalink)
The fans wouldnt spin under load the card was hitting almost 90 degrees. Going back to a older version fixed my problem
|
Lokator
Superclocked Member
- Total Posts : 147
- Reward points : 0
- Joined: 2018/03/13 18:25:57
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 05:14:34
(permalink)
New X1 version doesn’t save any power target setting correctly and switches back to one from profile 1 on other profiles with my 2080 Ti. Same like previous version. Really on the state of giving up and using afterburner instead.
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 05:24:43
(permalink)
Lokator
New X1 version doesn’t save any power target setting correctly and switches back to one from profile 1 on other profiles with my 2080 Ti. Same like previous version. Really on the state of giving up and using afterburner instead.
Set PX1 to run as administrator.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Lokator
Superclocked Member
- Total Posts : 147
- Reward points : 0
- Joined: 2018/03/13 18:25:57
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 05:29:27
(permalink)
d.burnette
Lokator
New X1 version doesn’t save any power target setting correctly and switches back to one from profile 1 on other profiles with my 2080 Ti. Same like previous version. Really on the state of giving up and using afterburner instead.
Set PX1 to run as administrator.
will try that, thanks. Ok works for now after deleting and reinstalling + admin start. Thanks. So it works. But: I still can´t set power and temp target individually. If I make power and temp target 100/80 instead of 100/84 it still goes back to 87/80 after restarting X1 and using the setting. This makes me so mad since I have to set it manually to 80 temp limit after every restart and profile switch. How can these basic features not work?
post edited by Lokator - 2019/04/29 05:54:45
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 16:41:29
(permalink)
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 16:42:38
(permalink)
xblackvalorx
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
Upgrade in Place or a Fresh Install of the OS?
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 16:45:47
(permalink)
bcavnaugh
xblackvalorx
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
Upgrade in Place or a Fresh Install of the OS?
Yes, upgrade. Planning on doing a fresh install once it hits the Microsoft media creation tool. Just wanted to test it out as I'd heard some people are getting decent performance increases for just an OS update. Also edit: just noticed my language was rather inprecise, the application locked to and froze not the OS. Should also note it only happened once.
post edited by xblackvalorx - 2019/04/29 16:49:45
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 16:50:04
(permalink)
xblackvalorx
bcavnaugh
xblackvalorx
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
Upgrade in Place or a Fresh Install of the OS?
Yes, upgrade. Planning on doing a fresh install once it hits the Microsoft media creation tool.
Just wanted to test it out as I'd heard some people are getting decent performance increases for just an OS update.
Should also note it only happened once.
You can try a PX1 Clean Up to see if it helps. https://forums.evga.com/FindPost/2947719https://forums.evga.com/FindPost/2947737
post edited by bcavnaugh - 2019/04/29 16:52:54
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 17:06:49
(permalink)
bcavnaugh
xblackvalorx
bcavnaugh
xblackvalorx
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
Upgrade in Place or a Fresh Install of the OS?
Yes, upgrade. Planning on doing a fresh install once it hits the Microsoft media creation tool.
Just wanted to test it out as I'd heard some people are getting decent performance increases for just an OS update.
Should also note it only happened once.
You can try a PX1 Clean Up to see if it helps.
https://forums.evga.com/FindPost/2947719
https://forums.evga.com/FindPost/2947737
Thanks I'll give that a try, I was thinking I'd try uninstalling and reinstalling px1 as I updated not only the OS but updated to the hotfix driver as well.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 17:58:10
(permalink)
xblackvalorx
bcavnaugh
xblackvalorx
bcavnaugh
xblackvalorx
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
Upgrade in Place or a Fresh Install of the OS?
Yes, upgrade. Planning on doing a fresh install once it hits the Microsoft media creation tool.
Just wanted to test it out as I'd heard some people are getting decent performance increases for just an OS update.
Should also note it only happened once.
You can try a PX1 Clean Up to see if it helps.
https://forums.evga.com/FindPost/2947719
https://forums.evga.com/FindPost/2947737
Thanks I'll give that a try, I was thinking I'd try uninstalling and reinstalling px1 as I updated not only the OS but updated to the hotfix driver as well.
Best to say away from Driver 430.39.
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 18:06:28
(permalink)
bcavnaugh
xblackvalorx
bcavnaugh
xblackvalorx
bcavnaugh
xblackvalorx
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
Upgrade in Place or a Fresh Install of the OS?
Yes, upgrade. Planning on doing a fresh install once it hits the Microsoft media creation tool.
Just wanted to test it out as I'd heard some people are getting decent performance increases for just an OS update.
Should also note it only happened once.
You can try a PX1 Clean Up to see if it helps.
https://forums.evga.com/FindPost/2947719
https://forums.evga.com/FindPost/2947737
Thanks I'll give that a try, I was thinking I'd try uninstalling and reinstalling px1 as I updated not only the OS but updated to the hotfix driver as well.
Best to say away from Driver 430.39.
I read about that, the power limit issue right? It is odd to me. I appear to have the issue. It shows only 100% in GPU-Z, and my wattage in PX1 osd isn't as high, however my card boosts to the exact same clocks without OC applied and with, and my OC is just as stable as previous versions. Which it never was before without the higher power Target and voltage. So the way I see it is, either it is just displaying wrong, which I doubt because it's showing on GPU-Z and the osd wattage measurement reflects it Or between the driver and the newer version of px1 my overclocks are way more stable. Which I hope means that when the power issue is fixed I can push even higher. But either way, it hasn't impacted anything for me in real world performance. Same peak frequency, same frequency at gaming temp, a few extra frames in my more demanding games actually. So the issue really confuses me honestly.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 18:21:00
(permalink)
xblackvalorx
Spoiler
bcavnaugh
xblackvalorx
bcavnaugh
xblackvalorx
bcavnaugh
xblackvalorx
Had a lock up and freeze with this version upon opening on Windows 10 build 1903, think it may have an issue with the new build as nothing like this has ever occurred before
Upgrade in Place or a Fresh Install of the OS?
Yes, upgrade. Planning on doing a fresh install once it hits the Microsoft media creation tool.
Just wanted to test it out as I'd heard some people are getting decent performance increases for just an OS update.
Should also note it only happened once.
You can try a PX1 Clean Up to see if it helps.
https://forums.evga.com/FindPost/2947719
https://forums.evga.com/FindPost/2947737
Thanks I'll give that a try, I was thinking I'd try uninstalling and reinstalling px1 as I updated not only the OS but updated to the hotfix driver as well.
Best to say away from Driver 430.39.
close
I read about that, the power limit issue right?
It is odd to me. I appear to have the issue. It shows only 100% in GPU-Z, and my wattage in PX1 osd isn't as high, however my card boosts to the exact same clocks without OC applied and with, and my OC is just as stable as previous versions.
Which it never was before without the higher power Target and voltage.
So the way I see it is, either it is just displaying wrong, which I doubt because it's showing on GPU-Z and the osd wattage measurement reflects it
Or between the driver and the newer version of px1 my overclocks are way more stable. Which I hope means that when the power issue is fixed I can push even higher. But either way, it hasn't impacted anything for me in real world performance.
Same peak frequency, same frequency at gaming temp, a few extra frames in my more demanding games actually. So the issue really confuses me honestly.
There is a lot more issue than just the PX1. One of the big ones is the High CPU Usage with the Driver and nothing to do with PX1.
post edited by bcavnaugh - 2019/04/29 18:31:10
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 18:31:01
(permalink)
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 18:56:59
(permalink)
bcavnaugh
GeForce Hotfix Driver Version 430.53
Please let others know if this Hot Fix Fixes any PX1 Issue, thanks.
It didn't fix the power limit issue for me, but it definitely fixed the abnormal cpu usage
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 18:58:03
(permalink)
xblackvalorx
bcavnaugh
GeForce Hotfix Driver Version 430.53
Please let others know if this Hot Fix Fixes any PX1 Issue, thanks.
It didn't fix the power limit issue for me, but it definitely fixed the abnormal cpu usage
Guess we just have to set it up to Run as administrator from now on.
|
XrayMan
Insert Custom Title Here
- Total Posts : 63846
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/29 22:36:08
(permalink)
Waiting for 3.17 to be released. Let's see if more issues like ours gets fixed. LOL. 
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A   
|
dc8flyer
SSC Member
- Total Posts : 561
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/30 09:04:33
(permalink)
bcavnaugh
xblackvalorx
bcavnaugh
GeForce Hotfix Driver Version 430.53
Please let others know if this Hot Fix Fixes any PX1 Issue, thanks.
It didn't fix the power limit issue for me, but it definitely fixed the abnormal cpu usage
Guess we just have to set it up to Run as administrator from now on.
The problem with setting it up as "Run as Administrator" is the PX1 "Start With OS" does not work. I know you don't prefer to start PX1 with OS, but I prefer it.
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 566.14 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/30 10:00:05
(permalink)
dc8flyer
bcavnaugh
xblackvalorx
bcavnaugh
GeForce Hotfix Driver Version 430.53
Please let others know if this Hot Fix Fixes any PX1 Issue, thanks.
It didn't fix the power limit issue for me, but it definitely fixed the abnormal cpu usage
Guess we just have to set it up to Run as administrator from now on.
The problem with setting it up as "Run as Administrator" is the PX1 "Start With OS" does not work.
I know you don't prefer to start PX1 with OS, but I prefer it.
If it worked I would use it. I do use it on PXOC on all my GTX Rigs.
|
skonkmonkey
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2018/11/27 15:16:18
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/30 17:07:10
(permalink)
When trying to uninstall all of the px1 files Its saying that the X86 file cannont be deleted because a file in it is open in another program. I have looked and dont see it running anywhere.
Thank you in advance.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/04/30 17:16:58
(permalink)
|
skonkmonkey
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2018/11/27 15:16:18
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/01 13:53:36
(permalink)
There is only one WinRing in the reg. its labeled WinRing0_1_2_0. Would this be what I should delete?
Thank you for your help, I'm trying the steps you've given me now.
Hopefully this will fix the phantom fan that px1 sometimes registers as running.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/01 13:57:56
(permalink)
skonkmonkey
There is only one WinRing in the reg. its labeled WinRing0_1_2_0. Would this be what I should delete?
Thank you for your help, I'm trying the steps you've given me now.
Hopefully this will fix the phantom fan that px1 sometimes registers as running.
Yes that is correct
|
skonkmonkey
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2018/11/27 15:16:18
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/01 14:51:29
(permalink)
Thanks for the info. Everything went well. Still have the phantom fan issue. I have changed out the stock ftw3 cooler for a hydro copper and sometimes px1 registers a fan running at sporadic speeds. It's not always there. I wonder if the fan header could be touching something it shouldn't be. IDK but it didn't do it until updating to the px1 v.15 anyways, Thanks again for the info.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/01 15:28:20
(permalink)
skonkmonkey
Thanks for the info. Everything went well. Still have the phantom fan issue. I have changed out the stock ftw3 cooler for a hydro copper and sometimes px1 registers a fan running at sporadic speeds. It's not always there. I wonder if the fan header could be touching something it shouldn't be. IDK but it didn't do it until updating to the px1 v.15 anyways, Thanks again for the info.
When you installed PX1 did your Card get a LED Firmware prompt to upgrade? And you are welcome we all help when we can.
|
Andeh Pandeh
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2017/03/13 20:50:25
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/07 02:02:47
(permalink)
When o when will this junk software actually be completely usable? Still problems with the OSD displaying erratically, amongst other issues. Each time I install a new beta I pray to the Gods that somehow it will finally be a stable fully functional build. Then I revert back to afterburner within a day or two full of disappointment about my purchase of a premium evga product. Funnily enough afterburner works flawlessly every time. Albeit without the ability to support the extra ftw3 functionality I've paid a premium for but cant actually use. What exactly is the problem here and why is it taking so long to get this program stable?
|
rusTORK
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2018/09/14 10:00:39
- Location: Russian Federation
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/08 14:37:46
(permalink)
Something REALLY wrong with Precision X1... Downloaded v0.3.16 BETA. Installed as admin, runned as admin. Saw "Precision X1" logo and it's crashed right after that. OS: Microsoft Windows 10 Pro v1809 build 17763.475 (x64) NVIDIA Driver: 425.31 VGA: GTX 1080 Ti SC2 [11G-P4-6593-KB]
post edited by rusTORK - 2019/05/08 14:54:37
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/08 15:35:46
(permalink)
rusTORK
Something REALLY wrong with Precision X1...
Downloaded v0.3.16 BETA. Installed as admin, runned as admin. Saw "Precision X1" logo and it's crashed right after that.
OS: Microsoft Windows 10 Pro v1809 build 17763.475 (x64)
NVIDIA Driver: 425.31
VGA: GTX 1080 Ti SC2 [11G-P4-6593-KB]
There is no need to run PX1 as an administrator under Driver 425.31. Blame NVIDIA for this starting with Driver 430.39 and newer. See Thread Power Target cannot be changed after updating to NVidia driver 430.39
|
Void65231
New Member
- Total Posts : 99
- Reward points : 0
- Joined: 2018/04/04 23:35:37
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/08 15:36:19
(permalink)
Somethings always really wrong with px1. As for your application crash, check this thread on how to clean uninstall everything px1 releated as well as uninstalling nvidia graphic drivers using DDU.
That “should” fix the crash on launch.
|
rusTORK
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2018/09/14 10:00:39
- Location: Russian Federation
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/08 15:54:22
(permalink)
I have no problem with my current graphic driver and XOC, only X1 act like it's not working. I see starting logo, but i don't see main menu. Software crash before that. How NVIDIA power Targer problem connected to Precision X1 start? Which NVIDIA driver version i may use with X1? I deleted EVGA folders in diffirent locations before X1 installation and result always was same - X1 don't even start after logo. All i want is working G.P.M. LED of iCX at windows boot, but it's not working in XOC and not working in X1. What the hell? =) P.S. One more thing - normal user must stay away from RegEdit as far as possible. Since one wrong deleted key and you have to reinstall windows. In another topic was few folders names without full address. It's not how things are done with RegEdit fix.
post edited by rusTORK - 2019/05/08 15:57:58
|
Void65231
New Member
- Total Posts : 99
- Reward points : 0
- Joined: 2018/04/04 23:35:37
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 - 0.3.16 Released
2019/05/08 16:16:24
(permalink)
As for the winring0 Regedit issue they suggest regedit because you usually can’t delete the file winring0 located in programfiles / Evga because it states its being used by another program. I don’t mess around with reg edit in this case I just rename the file to something random and reboot the computer then I’m able to delete the file.
I use nvidia driver 430.53 which seems to work fine for me on my 1080ti ftw3 hybrid using px1.
I don’t keep XOC installed if I’m going to use PX1 though.
For start as administrator I usually set the application to start as administrator in program compatibility settings.
|