EVGA

EVGA POWERBOOST (PCI-E Molex fix)

Page: 123 > Showing page 1 of 3
Author
Sum1uNo83
CLASSIFIED Member
  • Total Posts : 2692
  • Reward points : 0
  • Joined: 2009/04/14 19:57:32
  • Location: Florida
  • Status: offline
  • Ribbons : 12
2010/12/08 06:56:55 (permalink)
Well for thoe of use who have recieved them, they run great without any issues. there was some minor thoughts and concerns, but after some troubleshooting, it has been confirmed by many that the power boost stablized the +12v and run flawless. IMO EVGA is good to go with release of this product.
 
Please post if you have recieved a powerboost and your results/approval of this product for EVGA's refference.

                                       
                                                           
#1

73 Replies Related Threads

    z3r0t0l0rence
    Omnipotent Enthusiast
    • Total Posts : 9621
    • Reward points : 0
    • Joined: 2009/10/08 10:14:51
    • Location: Arizona
    • Status: offline
    • Ribbons : 20
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 06:58:35 (permalink)
    I am curious to see what it looks like too.  Please post pics!

    i7 930 OC 4.21 
    EVGA E758 
    GSkill 12GB
    Evga GTX 780 SC
    2x Kingston 240 Raid 0
    2x Seagate 4TB
     
     
    #2
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 06:58:38 (permalink)
    +1 for me, powerboost runs great, +12v is constant voltage and does not fluxuate anymore. power leads are only 6" long makes it hard to route cables in a clean manner IMO. however a great product. would recommend to all in need.

                                           
                                                               
    #3
    Gaaretjax
    Superclocked Member
    • Total Posts : 168
    • Reward points : 0
    • Joined: 2006/04/10 17:33:53
    • Status: offline
    • Ribbons : 1
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 07:12:02 (permalink)
    Installed the Power boost on Tuesday Morning.  Applied my CPU and GPU OC's and the 12v voltage is much more stable then prior to the Powerboost install.  Infact voltages across the entire MB either no longer drop as much if at all under stress loading ( Prime 95, Heaven 2.1, etc ). 
     
    I am very happy for the fix and will be ordering atleast 1 perhaps 2 more for some 780 boards that will be getting my 480's when my 580's arrive.  That will have to wait for folks to get thier fixes first but that is just fine with me.
     
    Thank you EVGA for once again going above and beyond for your customers when 99.9% of other companies would have done nothing in my opinion.  That is the type of CS I like and am happy to pay for when I purchase EVGA products.

    EVGA X299 Dark 9900X CPU oc'd @ 5.0GHZ 64GB Ram 2x 2080TI FTW3 HC in SLI
    Mountain Mods Ext UFO CYO Case 
    Affiliate code# M90AIN72H1
     

    #4
    Fentzinator
    Superclocked Member
    • Total Posts : 243
    • Reward points : 0
    • Joined: 2004/09/07 08:34:24
    • Location: Holland, NY
    • Status: offline
    • Ribbons : 0
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 07:26:17 (permalink)
    Thank you jrmitchell1983 for your constant updates.  It is very much appreciated.  Can't wait to get my hands on one of these. 

    Evga Classified 759, I7 980x @4.4 ghz, 12 gigs G-Skill  8,8,8,24,  Thermaltake 1350 PSU, Corsair 240 GT SSD,  Heat killer water block HK , Thermaltake Level 10 Case ,  2-xfx 7970 x-fire, Dell 30" Monitor,
     
     
    #5
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 08:32:14 (permalink)
    np, i only know of 3 members with results so far. where are the rest? would love for EVGA to launch asap, but would be helpful to them for more results/responces back from the ones they sent out.

                                           
                                                               
    #6
    KMoore4318
    Pistoj Doulos Unum Pluribus
    • Total Posts : 17864
    • Reward points : 0
    • Joined: 2008/12/04 04:20:57
    • Location: Atlanta, Ga
    • Status: offline
    • Ribbons : 237
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 12:51:55 (permalink)
    z3r0t0l0rence

    I am curious to see what it looks like too.  Please post pics!


     
    jrmitchell1983

    np, i only know of 3 members with results so far. where are the rest? would love for EVGA to launch asap, but would be helpful to them for more results/responces back from the ones they sent out.

    Ok, I recived mine took me a few days to get back, because I couldn't decide where to put it, Note I have four systems listed in SIG. below, and one power boost. I decided NOT to put it on the E758, it's running 260's so it doesn't needit, and I dcided not to put it in the 762, it has the additional plug, so it doesn't need it,this left me with a 760 with 2 580's, and a 759 with 2(295's ) the delima, the PB was designed for 480's, so the 762 would be a good choice since the 580's replace the 480, but per nvidia, the 295's actualy use more power than the 580's ( the 580's call for 600 watts min for first card and 244 watts for second.)
     
     the 295's call for 680 Watts  first card and 289 for the second

     
    Not being an expert, I opted to install on the one with the largested rated specification, post if you think I made a mistake, I am pleased with the results, but want to spend more time running tests, may change it to the other system and test some more, I am looking forward to obtaining more, but think it would be approprote for me to wait, before I ask for a second, while some of you still waiting on the first one. I would be willing to buy a few, if these were made available under products acceseries above .
     

     
    as far as problems the only one I had was beyond EVGA controll, First delivery attempt I was home but did not heare UPS knocking, They taged my door.( on a Friday, ) Monday I was deturmined to get it so I camped out near my door all day, However, I had to Pick up my daughter fron School, and they managed to Tag my door again, During the 1/2 hour I spent picking her up. Third day I was at the door waiting on UPS when he pulled up, but he also delivered a 980, some SSD's, and a H-70 for my new 762, so although I had my new Power boost, I had to decide what I wanted to play with, and what could wait. { have you ever felt like a child, set free in a candy store } I love the problem of too many Toys, or too much candy, and not enough mouths.   I hope to provide more info once I get back to playing with it, and running benches, ( I'm a big fan of TMI obviousley.)
     
      On a side note, Before VB install:

     
    After VB Install
     

     
    Not sure the VB was the only variable, First one I was folding on 2(580's ) and SMP, second shot, Just SMP.
     
    post edited by KMoore4318 - 2010/12/09 18:07:34

      
    Just clink Link to Register >  My Affiliate Code:VTJPDC4OMB 
    1)965 V-8  E761(77)
    2)980X AX1200 E760(77) 980 ti
    3) E770 (77)2(590) SLI AX1200 
    4) X299 FTW K, 9980XE 2 2080 supers on AX1200
    #7
    remenaker
    SSC Member
    • Total Posts : 868
    • Reward points : 0
    • Joined: 2004/12/18 17:22:55
    • Status: offline
    • Ribbons : 0
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 16:32:15 (permalink)
    Thats it me want one, me want one now.
    Please.
    #8
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 16:46:30 (permalink)
    yup thats it...lol small little thing. pcb about 1/2 tall maybe 2 1/2 wide. with 6" lead to molex.

                                           
                                                               
    #9
    comrade
    FTW Member
    • Total Posts : 1304
    • Reward points : 0
    • Joined: 2008/04/03 16:53:25
    • Location: Streamwood, Illinois USA
    • Status: offline
    • Ribbons : 4
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 17:31:37 (permalink)
    How does one go about getting one or two of these?  I have an E759 board with two EVGA GTX580SC's.  Do you need one for each card..., or do you just plug it into an unused PCIEx slot such as the one between my two video cards?
     
    I remember reading that these would be available around the end of November, but I've heard nothing and haven't seen anything on the EVGA site about where or how to get them.

    Gigabyte TRX40 Aorus Pro WiFi Amd sTRX4 ATX MB, AMD Ryzen 9 Threadripper 3960x, EVGA RTX 3090 FTW3 ULTRA HYBRID GAMING, 24G-P5-3988-KR, twin - 28" 3840 x 2160 Monitors, Samsung 970 Evo 1T, M2 NVME SSD for OS, 3x2 TB Toshiba SATA3 HD's for storage, Samsung SH-203 SATA DVD Drive, Coolermaster 1000 Watt PSU, Win 10 Pro 64 bit, Coolermaster HAF 932 Advanced case. Logitech G910 Mechanical Gaming Keyboard, Razer Orochi 2013 Mouse.
    #10
    KMoore4318
    Pistoj Doulos Unum Pluribus
    • Total Posts : 17864
    • Reward points : 0
    • Joined: 2008/12/04 04:20:57
    • Location: Atlanta, Ga
    • Status: offline
    • Ribbons : 237
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 17:36:43 (permalink)
    comrade

    How does one go about getting one or two of these?  I have an E759 board with two EVGA GTX580SC's.  Do you need one for each card..., or do you just plug it into an unused PCIEx slot such as the one between my two video cards?

    I remember reading that these would be available around the end of November, but I've heard nothing and haven't seen anything on the EVGA site about where or how to get them.

    You just need one, EVGA has recived and is distributing a limited supply, I am sure more are comeing, not sure how they will be made available, once they are main stream, and readaly available. Wait and see, or hope for more word !!!
    post edited by KMoore4318 - 2010/12/08 18:08:30

      
    Just clink Link to Register >  My Affiliate Code:VTJPDC4OMB 
    1)965 V-8  E761(77)
    2)980X AX1200 E760(77) 980 ti
    3) E770 (77)2(590) SLI AX1200 
    4) X299 FTW K, 9980XE 2 2080 supers on AX1200
    #11
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/08 17:43:33 (permalink)
    KMoore4318

    comrade

    How does one go about getting one or two of these?  I have an E759 board with two EVGA GTX580SC's.  Do you need one for each card..., or do you just plug it into an unused PCIEx slot such as the one between my two video cards?

    I remember reading that these would be available around the end of November, but I've heard nothing and haven't seen anything on the EVGA site about where or how to get them.

    You just need one, EVGA has recived and is destributing a limited supply, I am sure more are comeing, not sure how they will be made available, once they are main stream, and readaly available. Wait and see, or hope for more word !!!

     
     
    excellent post above man. have installed mine in the pci-e x1/x4 slot so i dont use the slot for gpus on my e758 board. volts on the +!2 are more stable and dont boucne around anymore. no issues so far.

                                           
                                                               
    #12
    clone
    SSC Member
    • Total Posts : 522
    • Reward points : 0
    • Joined: 2006/08/28 01:24:10
    • Location: Telford/west mids
    • Status: offline
    • Ribbons : 3
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/09 00:51:37 (permalink)
    Thanks bud i have put my name down for one in the other thread,now i know its not my new psu :)

    Asus Rog Maximus XII Formula
    10700K @ 4.8ghz 1.20v
    16Gb 8Pack 3600hz
    EVGA 2080 Super FTW3 Ultra
    Watercooled
    Phantek Evolv X
    #13
    Moltenlava
    CLASSIFIED ULTRA Member
    • Total Posts : 6304
    • Reward points : 0
    • Joined: 2008/04/14 04:57:22
    • Status: offline
    • Ribbons : 28
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/09 11:34:19 (permalink)
    According to EVGA they will make these available to all those with compatible boards for a limited time period.
     
    They better make it obvious how to get one when this happens, no putting you name in threads you wont know about unless you spend most of your time on these forums, as I would like one for my 2 GTX 295's + GTX 285 (PhysX) set-up.

    My sig is too big
     
    If you want to know my specs tough sh.. 
    #14
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/09 17:42:46 (permalink)
    cant be greedy or angry that you guys have not recieved one, or have to wait imo. EVGA does not have to provide this fix in anyway imo. they are doing this as a kind favor for us in the community guys. EVGA pays the cost here for us to be happy.
     
    Thank you EVGA and even if i never recieved one yet, i would be more than happy to wait patiently as most of use are.
     
    thank you again 

                                           
                                                               
    #15
    cneuhauser
    FTW Member
    • Total Posts : 1331
    • Reward points : 0
    • Joined: 2007/12/18 12:49:31
    • Status: offline
    • Ribbons : 5
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/09 20:04:27 (permalink)
    Question...since thits fits in the PCI-e bus, does it then use up some of the x58 lanes for graphics processing?

    Entho Evolv Anthracite Grey
    ASUS ROG E-Gaming X299
    i7 9800x 4.8ghz on water (Cuplex Vision block) 
    EVGA RTX 2080 XC Ultra / Water / EK Block
    GSkill Trident Z - 32gig
    2x Samsung 1TB SSD Evo
    Intel SSD 730 Series 240GB 
    Windows 10 Ultimate  
    EVGA 1600 SuperNova T2 
    Samsung G7 Faker 32" 240hz monitor
    Asus ROG Swift PG329Q 175hz monitor
    SteelSeries Arctis Pro+DAC
    B&W 801s, Driven by Sumo Amp via DAC
    #16
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/09 20:23:45 (permalink)
    cneuhauser

    Question...since thits fits in the PCI-e bus, does it then use up some of the x58 lanes for graphics processing?

     
    you can only use the powerboost in the slot installed in, no other components. IMO thats why i sugest installing in a pci-e x1/x4 slot, instead of using up a gpu slot.
     
    so far as using up some of the 36lanes, no. power addition only.

                                           
                                                               
    #17
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/10 17:10:36 (permalink)
    UPDATE: removed powerboost today to re-route for clean hidden look. modded the powerboost from 6" lead to 18" lead and with a higher gauge wire as well. works without a hitch np's and hidden. bios reads 12.10 on the +12  and everrest read 11.98 before powerboost install, now reads 12.04 steady. (i also have alot of adapters and extention in my rig) so for each one i lose a bit of power as well as the modular PSU's. so imo 12.04 is nt back concidering my config.
     
    No issues with the powerboost to report all is well so far and does help. 24pin is not hot at all where it was before nor is the lead for the powerboost.
     
    GREAT job EVGA +1

                                           
                                                               
    #18
    sengutso
    FTW Member
    • Total Posts : 1322
    • Reward points : 0
    • Joined: 2009/09/16 23:32:52
    • Location: JerZe ShoRe
    • Status: offline
    • Ribbons : 2
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/10 17:16:42 (permalink)
    hi where can i get one? and how much? i need this for my tri-sli 480

    CPU: Intel i7 980 @ 4.60 Gzh 
    Mobo: Msi Big Bang Xpower
    Ram: 12 GB Patriot Viper 2000  MZH 10-11-10-28-1T
    Hard Drive: 2x Seagate Baracuda 1TB 7200.12 in Raid 0
    GPU: 3x EVGA GTX 580 in Tri-SLi
    Sound Card: Soundblaster X-Fi Titanium HD
    Case: Coolermaster HAF 932 wit 240MM Rad Push/Pull Water Loop
    Power Supply: Corsair AX1200 80 Plus Gold Certified 
    3Dmark 11: 17187 
    We Are Intel! Pom! Pom! Pom! Pom! Sponsors Of Tomorow.
     
    #19
    Sum1uNo83
    CLASSIFIED Member
    • Total Posts : 2692
    • Reward points : 0
    • Joined: 2009/04/14 19:57:32
    • Location: Florida
    • Status: offline
    • Ribbons : 12
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/10 17:26:22 (permalink)
    sengutso

    hi where can i get one? and how much? i need this for my tri-sli 480

     
    EVGA has not release them yet, i recieved one of the first batches they made to the select members. contact jacob for info imo.

                                           
                                                               
    #20
    Clergy
    CLASSIFIED Member
    • Total Posts : 2296
    • Reward points : 0
    • Joined: 2008/12/27 14:45:40
    • Location: In A "Texas Flood"
    • Status: offline
    • Ribbons : 5
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/17 11:25:59 (permalink)
    Please correct me if I'm wrong but this mod is to be installed in any free pci-e x1/x4/16 slot and then plugged into a free molex cable on your PSU and that's it, correct?


    #21
    _ShannonR
    SSC Member
    • Total Posts : 635
    • Reward points : 0
    • Joined: 2009/04/16 17:47:03
    • Status: offline
    • Ribbons : 2
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/17 11:33:03 (permalink)
    Clergy

    Please correct me if I'm wrong but this mod is to be installed in any free pci-e x1/x4/16 slot and then plugged into a free molex cable on your PSU and that's it, correct?


    That is correct

    ASUS Rampage IV Black Edition
    3 Way TITAN Blacks
    TPX-1475 PSU
    LSI SSD RAID
    4960X 5.0GHz on Water
    64GB Patriot Viper 2400

    Overclocking Graveyard
    Too many new chips to list.....980X I forget how high LN2,W3580 5.7 GHz 1.79V on LN2, W3520 4.9GHz 1.57V on LN2, E8600  5.9Ghz 1.68V on Dice, E8400  5.5Ghz 1.68V on Dice, Q6600  4.7Ghz 1.52V on Dice, Cel 430 4.2Ghz 1.62V on Dice
    #22
    Naieve
    New Member
    • Total Posts : 75
    • Reward points : 0
    • Joined: 2007/03/09 21:44:46
    • Status: offline
    • Ribbons : 0
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/19 22:54:25 (permalink)
    Is there any hope of these being sold, I don't have a classified mobo, but I have an evga 480. Running tri-sli and had to rma my ud3r and tpq-1200 as the 24 pin melted just like the pics of the classifieds.
     
    I'll gladly pay for it.  

    Mountain Mods Ascension
    Gigabyte Z390 Aorus Master
    9900k @ 4.9ghz 1.29v
    G.Skill 3000mhz C14
    EVGA 2080ti w/Hydrocopper
    Samsung 970 EVO M.2 + SM951 M.2 SSD
    3 x Samsung CHG-70 
     
    #23
    KMoore4318
    Pistoj Doulos Unum Pluribus
    • Total Posts : 17864
    • Reward points : 0
    • Joined: 2008/12/04 04:20:57
    • Location: Atlanta, Ga
    • Status: offline
    • Ribbons : 237
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/19 22:55:41 (permalink)
    You should be able to buy them before the end of the first week of next year. Dont know price yet, But they will be available on EVGA store. Ofical anouncment should be next week. 
    *
    Update : EVGA Power Boost http://www.evga.com/products/moreInfo.asp?pn=100-MB-PB01-BR&family=Accessories - Hardware&sw=4
    post edited by KMoore4318 - 2011/01/09 18:50:32

      
    Just clink Link to Register >  My Affiliate Code:VTJPDC4OMB 
    1)965 V-8  E761(77)
    2)980X AX1200 E760(77) 980 ti
    3) E770 (77)2(590) SLI AX1200 
    4) X299 FTW K, 9980XE 2 2080 supers on AX1200
    #24
    Naieve
    New Member
    • Total Posts : 75
    • Reward points : 0
    • Joined: 2007/03/09 21:44:46
    • Status: offline
    • Ribbons : 0
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/19 23:00:12 (permalink)
    Thank God for EVGA.  I really wish now I had bought 2 480's and spent the rest on a 762+ classified that has a native power mod.  If only I had known.

    Mountain Mods Ascension
    Gigabyte Z390 Aorus Master
    9900k @ 4.9ghz 1.29v
    G.Skill 3000mhz C14
    EVGA 2080ti w/Hydrocopper
    Samsung 970 EVO M.2 + SM951 M.2 SSD
    3 x Samsung CHG-70 
     
    #25
    lamedor
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2010/10/09 02:26:01
    • Status: offline
    • Ribbons : 0
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/20 03:27:40 (permalink)
    Hello,
     
    Someone can shipping the powerboost to the france for me when he will be available because evga sends only at Canada, Mexico, and the United States  ?
     
    Regards.
    #26
    5mall5nail5
    SSC Member
    • Total Posts : 625
    • Reward points : 0
    • Joined: 2007/08/28 21:31:50
    • Status: offline
    • Ribbons : 1
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/20 05:13:18 (permalink)
    How do you know if you need one of these things?

    Aorus Z390 Master - i9 9900K @ 5.2 GHz
    MSI Gaming X Trio 2080 Ti w/ EKWB Waterblock
     
    Aorus X570 Master - 3900X @ Stock
    EVGA 2080 Super XC Ultra
    #27
    lamedor
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2010/10/09 02:26:01
    • Status: offline
    • Ribbons : 0
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/20 05:24:14 (permalink)
    I have an e760 motherboard with 3*gtx470, and I would like oc gpus safely without burn my atx24pins.
    #28
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 87457
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Belgium
    • Status: offline
    • Ribbons : 75
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/20 07:10:06 (permalink)
    I have been informed that Europeans can expect this item sometime in January but an exact date in January is not yet known. If I find out any additional info I'll let everyone know.
    post edited by rjohnson11 - 2010/12/20 07:12:29

    AMD Ryzen 9 5950X,  Corsair Mp600 Pro M.2, 128GB DDR4  Crosshair VIII Hero, RX 6900 XT Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #29
    Naieve
    New Member
    • Total Posts : 75
    • Reward points : 0
    • Joined: 2007/03/09 21:44:46
    • Status: offline
    • Ribbons : 0
    Re:EVGA POWERBOOST (PCI-E Molex fix) 2010/12/20 08:53:42 (permalink)
    I'd go ahead and get it urinemachine.

    You have the 760 mobo, and the native fix wasn't instituted until the 762.  Apparently even dual 480's can overload a 760.  Better safe than sorry mate.  Trust me, I'm very sorry I didn't know current mobos needed a power mod for 480 sli/tri.

    Mountain Mods Ascension
    Gigabyte Z390 Aorus Master
    9900k @ 4.9ghz 1.29v
    G.Skill 3000mhz C14
    EVGA 2080ti w/Hydrocopper
    Samsung 970 EVO M.2 + SM951 M.2 SSD
    3 x Samsung CHG-70 
     
    #30
    Page: 123 > Showing page 1 of 3
    Jump to:
  • Back to Mobile