knotsonice
iCX Member
- Total Posts : 448
- Reward points : 0
- Joined: 2005/02/04 19:29:55
- Location: Bremerton, WA
- Status: offline
- Ribbons : 1
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/12 16:56:22
(permalink)
Comp was off most of the day due to a power outage last night.... I didn't reboot it till a fw mins ago. Everything is fine and folding right now.
My Affiliate Code: GTVAF5CPT9 My rig: 9900k (5.1ghz all core) EVGA FTW3 3080 TI Wife's rig: 8600k (5ghz all core) EVGA RTX2070 super
|
rjrusso
Superclocked Member
- Total Posts : 206
- Reward points : 0
- Joined: 2005/11/22 17:29:05
- Status: offline
- Ribbons : 0
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/12 17:17:15
(permalink)
knotsonice
Comp was off most of the day due to a power outage last night.... I didn't reboot it till a fw mins ago. Everything is fine and folding right now.
Okay, thanks for the update, another question is when you have it powered off do you still have power going into the board, or do you kill the power at the PSU?
|
Rgallant
SSC Member
- Total Posts : 605
- Reward points : 0
- Joined: 2007/12/22 13:56:38
- Status: offline
- Ribbons : 1
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/12 18:22:36
(permalink)
Moltenlava
So those who registered for the free 75 have started receiving theirs? I was one of those people and have not received mine yet.
Is there a way to tell your one has been sent or do they just turn up at your door without warning?
-mine showed up this morning 
3770k [KL370]|| 3xMCR320[basement] || ek bay res|| 655x2 ek-tops || 9xSFF21F || Vl4n MVF WC || Evga GTX 780 sc 941 sli EK block,s Sam 256gb 840 Pro|| HAF 932 || 8 gb Tridents 2400 W7HP-64 || 27"A850D || AX1200w || G15,G13,G500s SB-Z -analog >Yamaha 765 AVR, 4x PSB alpha b1 ,1 x PSB alpha C1 ,10" sub
|
knotsonice
iCX Member
- Total Posts : 448
- Reward points : 0
- Joined: 2005/02/04 19:29:55
- Location: Bremerton, WA
- Status: offline
- Ribbons : 1
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/12 19:09:33
(permalink)
rjrusso
knotsonice
Comp was off most of the day due to a power outage last night.... I didn't reboot it till a fw mins ago. Everything is fine and folding right now.
Okay, thanks for the update, another question is when you have it powered off do you still have power going into the board, or do you kill the power at the PSU?
No switch on the power supply...
My Affiliate Code: GTVAF5CPT9 My rig: 9900k (5.1ghz all core) EVGA FTW3 3080 TI Wife's rig: 8600k (5ghz all core) EVGA RTX2070 super
|
Moltenlava
CLASSIFIED ULTRA Member
- Total Posts : 6302
- Reward points : 0
- Joined: 2008/04/14 04:57:22
- Status: offline
- Ribbons : 28
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/13 11:04:50
(permalink)
rjrusso
knotsonice
Got power boost in a few days ago. Installed in a 758 in the 1x slot. Running a GTX 580 and GTX 295. ......
Carl
Have you turned off your computer for any length of time since you have installed it?
Moltenlava
So those who registered for the free 75 have started receiving theirs? I was one of those people and have not received mine yet.
Is there a way to tell your one has been sent or do they just turn up at your door without warning?
I purchased mine. From what I've seen around the forums, to those who did register for the free supply, they said they just arrived with no warning. At least a few reports have said that.
thanks I guess mine might take a little longer to get to Europe. Does anyone know if the 4G T-Shirts were sent yet? I won one but have not received it yet EDIT Both these issues have been dealt with by Joe, T-Shirt and powerboost on the way. Thanks.
post edited by Moltenlava - 2011/01/13 17:29:21
|
whodaddy
SSC Member
- Total Posts : 875
- Reward points : 0
- Joined: 2007/06/03 06:35:39
- Location: Arizona
- Status: offline
- Ribbons : 3
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/13 17:18:59
(permalink)
I got a second notice on one in stock and gone again by the time I read the email. very frustrating :(
E-759 CLASSIFIED & I7 920 DO B261
OCZ DDR 3 1600 Gold 6GS / TFC 480 and TFC 360 w KOOLANCE RAD SUPPORT 2x655 PUMPS IN SERIES/ BITS 150Z RES
EK FULL COVERAGE BLOCK / BITS COMPRESSION/ROTARY FITTINGS
EK HF SUPREME PLEXI COPPER CPU BLOCK 1/2X5/8 TUBING
2x GTX 470 SC W EK BLOCKS/WD 150 RADPTOR WD 300 RAPTOR WD 1TB CORSAIR 800D CASE/CORSAIR HX-1000 http://www.heatware.com/eval.php?id=67849 
|
WhiteDragon_
FTW Member
- Total Posts : 1190
- Reward points : 0
- Joined: 2009/06/25 20:42:10
- Status: offline
- Ribbons : 4
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/13 18:08:47
(permalink)
Just installed mine and ran Heaven Benchmark on the highest settings available and also did some gaming.
Before install ~ 12v would drop to 11.89
After install ~ 12v drops to 12.04
At idle it used to sit at 12.11 and now it sits at 12.18
Happy with the results!!
Dimastech Easy V2.5 | EVGA Z690 Dark KP | 12900KS | G.Skill Trident Z5 6400 | EVGA RTX 3080Ti | Sound Blaster X-Fi Titanium Fatal1ty Pro Series | FireCuda 530 M.2 | Corsair AX1200i | Alienware 34" | Windows 10 Pro | Basilisk Ultimate | BlackWidow v3 TenKeyless | Affiliate Code: 6GUDAW6JKZ Heatware: http://www.heatware.com/eval.php?id=79888
|
Luigi408
iCX Member
- Total Posts : 331
- Reward points : 0
- Joined: 2005/08/28 01:28:42
- Location: San Jose, Ca
- Status: offline
- Ribbons : 0
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/13 18:42:34
(permalink)
Does this for on the PCI slot in the 759? Cuase I use all my PCIe.
|
KMoore4318
Pistoj Doulos Unum Pluribus
- Total Posts : 17850
- Reward points : 0
- Joined: 2008/12/04 04:20:57
- Location: Atlanta, Ga
- Status: offline
- Ribbons : 238
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/13 19:13:40
(permalink)
lcabezas
Does this for on the PCI slot in the 759? Cuase I use all my PCIe.
It will not go on a PCI, but it will fit under a dual card in the slot not being used if you have one of those.
Just clink Link to Register > My Affiliate Code:VTJPDC4OMB 1)965 V-8 E761(77) 2)980X AX1200 E760(77) 980 ti 3) E770 (77)2(590) SLI AX1200 4) X299 FTW K, 9980XE 2 2080 supers on AX1200
|
WhiteDragon_
FTW Member
- Total Posts : 1190
- Reward points : 0
- Joined: 2009/06/25 20:42:10
- Status: offline
- Ribbons : 4
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/13 19:47:54
(permalink)
Like KMoore said I have it under one of my 580's and it fit no problem. My 12v doesn't fluctuate anymore either.
Dimastech Easy V2.5 | EVGA Z690 Dark KP | 12900KS | G.Skill Trident Z5 6400 | EVGA RTX 3080Ti | Sound Blaster X-Fi Titanium Fatal1ty Pro Series | FireCuda 530 M.2 | Corsair AX1200i | Alienware 34" | Windows 10 Pro | Basilisk Ultimate | BlackWidow v3 TenKeyless | Affiliate Code: 6GUDAW6JKZ Heatware: http://www.heatware.com/eval.php?id=79888
|
WhiteDragon_
FTW Member
- Total Posts : 1190
- Reward points : 0
- Joined: 2009/06/25 20:42:10
- Status: offline
- Ribbons : 4
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/13 19:54:42
(permalink)
I think if EVGA has a say so in how long the leads are for this connector it should be like 12 inches or so. I am not complaining. I think it's great that we have the option to install this thing. It would just make it alot easier to keep things neat and tidy for airflow and looks if it were longer. I think I might replace the wires with longer ones. If anyone does this besides me (and i am sure it has already been done :)) please make sure the wire you use is the correct gauge.
Dimastech Easy V2.5 | EVGA Z690 Dark KP | 12900KS | G.Skill Trident Z5 6400 | EVGA RTX 3080Ti | Sound Blaster X-Fi Titanium Fatal1ty Pro Series | FireCuda 530 M.2 | Corsair AX1200i | Alienware 34" | Windows 10 Pro | Basilisk Ultimate | BlackWidow v3 TenKeyless | Affiliate Code: 6GUDAW6JKZ Heatware: http://www.heatware.com/eval.php?id=79888
|
5mall5nail5
iCX Member
- Total Posts : 409
- Reward points : 0
- Joined: 2007/08/28 21:31:50
- Status: offline
- Ribbons : 1
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/15 13:23:35
(permalink)
I'd like one of these for a Tri-SLI 580 setup on a E760 but it seems evga hasn't had some for some time?
Asus Crosshair VIII Hero -- 5950X Stock EVGA 3090 FTW3 Ultra
|
WhiteDragon_
FTW Member
- Total Posts : 1190
- Reward points : 0
- Joined: 2009/06/25 20:42:10
- Status: offline
- Ribbons : 4
Re:EVGA POWERBOOST (PCI-E Molex fix)
2011/01/15 20:50:48
(permalink)
I can't believe it would be much longer now. It doesn't take much to produce these and your right it has been a while since they were in stock. Hang in there a "little" while longer. I bet they have them by the end of next week. You might want two of them with triple sli. Just a thought.
Dimastech Easy V2.5 | EVGA Z690 Dark KP | 12900KS | G.Skill Trident Z5 6400 | EVGA RTX 3080Ti | Sound Blaster X-Fi Titanium Fatal1ty Pro Series | FireCuda 530 M.2 | Corsair AX1200i | Alienware 34" | Windows 10 Pro | Basilisk Ultimate | BlackWidow v3 TenKeyless | Affiliate Code: 6GUDAW6JKZ Heatware: http://www.heatware.com/eval.php?id=79888
|
refugee1974
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2011/06/24 16:36:38
- Status: offline
- Ribbons : 0
Re:EVGA POWERBOOST (PCI-E Molex fix)
2013/05/08 06:06:17
(permalink)
Come on eVGA, lots of people want this thing! You need to make more! I just ordered one even though it's out of stock. I already melted the 24-pin plug on one power supply, so I need this fix. I'll just have to run a single video card until eVGA decides to make more of these. Sad really...
|