onepumpchump10
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2020/11/18 08:54:37
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/02/14 08:37:59
(permalink)
creative2k
Hi guys. Quick question (waiting for evga to respond on my ticket): I received a rev 0.1 3090 ftw3 ultra because my first card died/popped during New World. I just discovered that the XOC Bios doesnt work. The Card limits the power between ~380-400 watts. I never had this issue with my old one (also rev 0.1). The funny thing is the normal non OC Bios will run up to 420 watts...
Has someone experienced the same issue an solved it?
You should email the 3090 program and get a rev 1.0 card. .1 revs are a ticking time bomb and have not been fixed properly
|
martin45ve
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2010/12/09 14:34:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/02/14 14:38:59
(permalink)
Hello Jacobo, I have an EVGA GeForce RTX 3090 FTW3 HYBRID, how can I know if mine has that bios, install the XOC BIOS
|
creative2k
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2007/12/17 15:53:25
- Location: AUT - Vienna
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/02/15 06:57:18
(permalink)
onepumpchump10
creative2k
Hi guys. Quick question (waiting for evga to respond on my ticket): I received a rev 0.1 3090 ftw3 ultra because my first card died/popped during New World. I just discovered that the XOC Bios doesnt work. The Card limits the power between ~380-400 watts. I never had this issue with my old one (also rev 0.1). The funny thing is the normal non OC Bios will run up to 420 watts...
Has someone experienced the same issue an solved it?
You should email the 3090 program and get a rev 1.0 card. .1 revs are a ticking time bomb and have not been fixed properly
I mailed the 3090 program and I'm waiting now for a response. Meanwhile the support ticket has been answered: "Thank you for coming back with additional Information about BIOS. Please find one of the latest BIOS supporting 450 watts available for this Graphics card. VER: 94.02.42.80.AD and let us know the results after updating the BIOS" OK, so instead of providing a BIOS the support just lets you know the latest version? oO Didnt see the attachment on the Phone, all good, they supplied a BIOS. I will try it.. Edit. i tried the BIOS from Techpowerup: VGA Bios Collection: EVGA RTX 3090 24 GB | TechPowerUp Not getting better...  Edit2. Test with BIOS provided by EVGA: No change.  Edit3. By the way the "1000w Kingpin BIOS" removes the Powerlimit, but i dont want to run it 24/7 because there is no ReBar and i guess no warranty if the card dies with this bios on it? @jacob?
post edited by creative2k - 2022/02/15 07:50:53
| Sys| CPU|AMD Ryzen 9 5950x @ 4.75GHz - 1.35V | MB|ASUS ROG Crosshair VIII Dark Hero | RAM|2x16GB G.Skill Trident Z DDR4-4000C19 @ 3600 14-13-13 | GFX|EVGA GeForce RTX 3090 FTW3 Ultra @ 2.1xGHz | SSD|Samsung SSD 980 Pro 2TB M.2 |Samsung SSD 970 Evo Plus 2TB M.2 |Samsung 860 QVO 2TB SATA | PSU|BeQuiet Dark Power Pro 11 1000Watt | Audio|Creative SoundBlaster AE-9
|
onepumpchump10
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2020/11/18 08:54:37
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/02/18 06:42:07
(permalink)
So RMA 2 for me, I received a rev 1.0 card…. All I can say…. It works like these cards should have from the start!!!!!! Pcie slot power never went past 64.7 in test and I haven’t really tried pushing the oc…. Set the oc to +120 and then made a curve for 1.1mv to run at 2145 …. Cube bench ran flawless and board power went up to 470w on the oc stock…. If you can get ur hands on a 1.0 card…. DO IT. I kind of want to try the 1kw KP on it, I heard there was a 1kw with rebar floating around not sure how true that is 22k on cinebench , will try port tomorrow but it seems this card OCs like a champ…. Using it on a aorus master z690 and 1300w supernova g+
post edited by onepumpchump10 - 2022/02/18 06:44:59
|
kriegeeer
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2020/10/16 13:31:41
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/03/10 08:32:40
(permalink)
Emailed 3090oc@ and RMAd my card after hitting black screen + 100% fan speed repeatedly, also observed out of spec power draw on the PCI-e slot and some imbalance on the 8pins. The replacement was an 0.1 board, didn't have the XOC bios in the OC slot (107% power limit max), and was even more unbalanced in the 8pins (~120-130-70 compared to ~120-100-80 before). Also rebooted within a couple minutes of halo and hit 78.5w in the pci-e slot on the latest stock bios and frequency settings. Plus the fans rattled. I wonder if I got sent someone's RMA return by accident. Currently waiting to hear back about sending it back, but a bit sad I have to wait to get functional again. At least I have a backup older gen card I can use still.
|
eXp67
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2021/01/11 12:13:13
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/03/22 15:57:03
(permalink)
Hello All, My rev 0.1 FTW3 ultra just died during playing cyberpunk > Red light / Dead I asked the RMA on it, the answer of evga was instant and RMA approved. It takes me time to send them the card, as i needed to order some new pad to reinstall the original heatsink, like i was using a waterblock. They took 1day to send me back a new card, and i received the the following day ...  All i can say, evga support is really really excellent ! The new card is rev 1.0 and 450W bios was installed on OC bios. In a first test, i immediatly see the PCI-E fixed with a 60W max power consumption ! The only thing i could say is, the power balacing is not so good, pushing 50% less TDP on the Third 8PIN connector. My rev 0.1 doesn't have this power balacing problem. It could be a real problem if i wanted to push the 1000W bios and use 600-650W daily (i have a strong cooling with a chiller :) ) After flashing the XOC 500W bios from rev 0.1, the card handle a constant 520W without any problem. Binning is excellent like the 0.1 rev, +200GPU +1600RAM. I now know that all my nvidia card will be only EVGA only, and the next will be surely the 4090 KP if AMD doesn't make really better :) Thanks EVGA !
post edited by eXp67 - 2022/03/22 15:58:32
|
eXp67
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2021/01/11 12:13:13
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/03/22 16:20:26
(permalink)
Yes I confirm the working KP bios 1000W with rebar exist :) If you have contact or you know where to look, you will find it :)
But, like you have a rev1.0 fixed version, i don't council you to use the 1000W, the XOC bios from rev0.1 will let you handle a constant 520W ! So except you have strong cooling / secure install / and really know what you are doing, using the 1000W is not a good choice for a working card for daily :)
|
creative2k
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2007/12/17 15:53:25
- Location: AUT - Vienna
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/03/23 13:35:52
(permalink)
Meanwhile i sent the old rev 0.1 back (RMA, i hope EVGA sends me back a Rev 1.0 this time) because i just bought a new 3090 FTW3 Ultra (rev1.0). It works very well (default boosts up to 1960MHz), but the default XOC bios on the card (94.02.42.c0.02) maxes out around 440-460W (never gets higher). But i can confirm the PCI-E power draw is fixed. I have not tested other bios versions yet, i'm just happy that i have a Rev1.0 now  @eXp67 which exact bios version do you use of the XOC bios for the 520W PT?
| Sys| CPU|AMD Ryzen 9 5950x @ 4.75GHz - 1.35V | MB|ASUS ROG Crosshair VIII Dark Hero | RAM|2x16GB G.Skill Trident Z DDR4-4000C19 @ 3600 14-13-13 | GFX|EVGA GeForce RTX 3090 FTW3 Ultra @ 2.1xGHz | SSD|Samsung SSD 980 Pro 2TB M.2 |Samsung SSD 970 Evo Plus 2TB M.2 |Samsung 860 QVO 2TB SATA | PSU|BeQuiet Dark Power Pro 11 1000Watt | Audio|Creative SoundBlaster AE-9
|
eXp67
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2021/01/11 12:13:13
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/03/26 17:50:06
(permalink)
|
Draslay31
New Member
- Total Posts : 49
- Reward points : 0
- Joined: 2017/08/28 11:57:48
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/03/30 05:06:05
(permalink)
I would also like to chip in - Just received my 3090 FTW3U four days ago (V1.2) I Did testing all weekend and hitting close to 500W with an undervolted OC in 3DMark and Unigine Heaven testing - My 3090 FTW3U is version 1.2 and has all thermal pads replaced/upgraded and GPU has Thermal Grease applied (just FYI) Voltage curve has been set to the following: -- using 0.800mV for 1800MHz --- using 0.950mV for 1920 MHz ---- using max load of 1.000 mV for 2044MHz (There is still PLENTY of OC room left yet this is where I personally like my temps/perf. ratio) Port Royal: https://www.3dmark.com/pr/1503945Fire Strike: https://www.3dmark.com/fs/27486065 To be optimal and get the BEST scores one would need an OC for every separate benchmark - Fire Strike, Port Royal, Fire Strike Extreme,.... They all seem to like different Voltage curves etc. The 500W Bios definitely works as intended and when undervolted the temps stay well around or below the 65C under load on both CC(Clock Core) and MEM (Memory) Thank you EVGA for building a quality GPU, I am super impressed and a proud owner of you 3090 FTW3U :)
post edited by Draslay31 - 2022/03/30 05:19:04
|
SyndicatedLife
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/12/22 10:39:36
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/06 08:04:56
(permalink)
I've emailed them based on this board I have (rev1) but I also am unable, no matter what I do, to get the third PCIE cable to be loaded. It's typically 96w use, whereas my other cables are 150w each. The card only ever avg's 455 under extreme load even with great temperatures (52 gpu, 75 junction) with furmark and a huge amount of airflow. I asked customer service to replace it per the info in this thread and via the correct email, and they said there's no reason to, as it doesn't need that much power. I've reached out to my CC for a dispute as I'm past the return window.
post edited by SyndicatedLife - 2022/04/06 13:38:31
|
ccabal2003
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2021/03/17 10:27:40
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/07 19:54:33
(permalink)
Anyone know where I can find the 1000w kp vbios with rebar? Thanks!
|
ss5234
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2021/05/17 11:48:08
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/08 20:48:50
(permalink)
Update on my personal situation.
I purchased this card in August 2020 and have been following this thread since.
I could never break 460w on my Rev 1.0 3982 card. I was accepted into the RMA request and by sheer lack of will and responsibility I never had it shipped out. I requested it be re-opened and EVGA was swift in doing so. Thanks to their awesome support.
I gave up when flashing to .27 (I was at CO.O2 from factory) as it would still not let me break 109% PT and 460W in anything I did.
I ended up using it at CO.O2 with typical usage at around 430W.
I decided to reflash it now almost 2 years later and it is hitting on average 113% PT, with a max of around 495W. I don't know what I did differently but the card has finally begun to hit 500W!
If you do have a Rev 1.0 card your best bet is to flash to .27. It took me around 5-6 tries spread out over a year before it finally worked.
For reference I have an EKWB active backplate and block with 2 360mm x 60mm radiators in a full custom loop. PX-1000 PSU, 5950x, Dark hero, 32GB 3600 C14.
|
SyndicatedLife
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/12/22 10:39:36
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/08 21:51:11
(permalink)
ss5234
Update on my personal situation.
I purchased this card in August 2020 and have been following this thread since.
I could never break 460w on my Rev 1.0 3982 card. I was accepted into the RMA request and by sheer lack of will and responsibility I never had it shipped out. I requested it be re-opened and EVGA was swift in doing so. Thanks to their awesome support.
I gave up when flashing to .27 (I was at CO.O2 from factory) as it would still not let me break 109% PT and 460W in anything I did.
I ended up using it at CO.O2 with typical usage at around 430W.
I decided to reflash it now almost 2 years later and it is hitting on average 113% PT, with a max of around 495W. I don't know what I did differently but the card has finally begun to hit 500W!
If you do have a Rev 1.0 card your best bet is to flash to .27. It took me around 5-6 tries spread out over a year before it finally worked.
For reference I have an EKWB active backplate and block with 2 360mm x 60mm radiators in a full custom loop. PX-1000 PSU, 5950x, Dark hero, 32GB 3600 C14.
Rev1 should be on 02 bios. 27 was reserved for those cards that blew up playing New World and other games. I wouldn't trust that as far as I could throw it.
|
ss5234
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2021/05/17 11:48:08
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/08 22:27:26
(permalink)
SyndicatedLife
ss5234
Update on my personal situation.
I purchased this card in August 2020 and have been following this thread since.
I could never break 460w on my Rev 1.0 3982 card. I was accepted into the RMA request and by sheer lack of will and responsibility I never had it shipped out. I requested it be re-opened and EVGA was swift in doing so. Thanks to their awesome support.
I gave up when flashing to .27 (I was at CO.O2 from factory) as it would still not let me break 109% PT and 460W in anything I did.
I ended up using it at CO.O2 with typical usage at around 430W.
I decided to reflash it now almost 2 years later and it is hitting on average 113% PT, with a max of around 495W. I don't know what I did differently but the card has finally begun to hit 500W!
If you do have a Rev 1.0 card your best bet is to flash to .27. It took me around 5-6 tries spread out over a year before it finally worked.
For reference I have an EKWB active backplate and block with 2 360mm x 60mm radiators in a full custom loop. PX-1000 PSU, 5950x, Dark hero, 32GB 3600 C14.
Rev1 should be on 02 bios. 27 was reserved for those cards that blew up playing New World and other games. I wouldn't trust that as far as I could throw it.
Read the past 20 pages, all have been stating that this is the best way to achieve 500W. Specifically on Rev1 and up cards.
|
SyndicatedLife
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/12/22 10:39:36
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/08 22:42:01
(permalink)
ss5234
SyndicatedLife
ss5234
Update on my personal situation.
I purchased this card in August 2020 and have been following this thread since.
I could never break 460w on my Rev 1.0 3982 card. I was accepted into the RMA request and by sheer lack of will and responsibility I never had it shipped out. I requested it be re-opened and EVGA was swift in doing so. Thanks to their awesome support.
I gave up when flashing to .27 (I was at CO.O2 from factory) as it would still not let me break 109% PT and 460W in anything I did.
I ended up using it at CO.O2 with typical usage at around 430W.
I decided to reflash it now almost 2 years later and it is hitting on average 113% PT, with a max of around 495W. I don't know what I did differently but the card has finally begun to hit 500W!
If you do have a Rev 1.0 card your best bet is to flash to .27. It took me around 5-6 tries spread out over a year before it finally worked.
For reference I have an EKWB active backplate and block with 2 360mm x 60mm radiators in a full custom loop. PX-1000 PSU, 5950x, Dark hero, 32GB 3600 C14.
Rev1 should be on 02 bios. 27 was reserved for those cards that blew up playing New World and other games. I wouldn't trust that as far as I could throw it.
Read the past 20 pages, all have been stating that this is the best way to achieve 500W. Specifically on Rev1 and up cards.
I've read every post across the 239 pages. It's the "only" way, or use the kingpin bios. The "best" way is for EVGA to get off they butts and fix it right. :(
|
ss5234
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2021/05/17 11:48:08
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/08 22:46:15
(permalink)
SyndicatedLife
ss5234
SyndicatedLife
ss5234
Update on my personal situation.
I purchased this card in August 2020 and have been following this thread since.
I could never break 460w on my Rev 1.0 3982 card. I was accepted into the RMA request and by sheer lack of will and responsibility I never had it shipped out. I requested it be re-opened and EVGA was swift in doing so. Thanks to their awesome support.
I gave up when flashing to .27 (I was at CO.O2 from factory) as it would still not let me break 109% PT and 460W in anything I did.
I ended up using it at CO.O2 with typical usage at around 430W.
I decided to reflash it now almost 2 years later and it is hitting on average 113% PT, with a max of around 495W. I don't know what I did differently but the card has finally begun to hit 500W!
If you do have a Rev 1.0 card your best bet is to flash to .27. It took me around 5-6 tries spread out over a year before it finally worked.
For reference I have an EKWB active backplate and block with 2 360mm x 60mm radiators in a full custom loop. PX-1000 PSU, 5950x, Dark hero, 32GB 3600 C14.
Rev1 should be on 02 bios. 27 was reserved for those cards that blew up playing New World and other games. I wouldn't trust that as far as I could throw it.
Read the past 20 pages, all have been stating that this is the best way to achieve 500W. Specifically on Rev1 and up cards.
I've read every post across the 239 pages. It's the "only" way, or use the kingpin bios. The "best" way is for EVGA to get off they butts and fix it right. :(
Then you would have known that 3090OC support still accepts Rev 1 cards that are manually flashed to .27. Personally I can vouch for it as that was one of my main points when emailing support, using screenshots of slightly improved performance with a Rev .1 BIOS (460W on .27 vs 430W on .O2, not close enough for my liking). And that there have been no bricked instances of it not working despite turning nvflash protect off. Give it a try.
post edited by ss5234 - 2022/04/08 22:48:06
|
ss5234
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2021/05/17 11:48:08
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/09 15:03:27
(permalink)
I just wanted to confirm that performance hasn't really improved despite the access to 490W+. Not sure why.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/10 11:47:57
(permalink)
ss5234
Update on my personal situation.
I purchased this card in August 2020 and have been following this thread since.
I could never break 460w on my Rev 1.0 3982 card. I was accepted into the RMA request and by sheer lack of will and responsibility I never had it shipped out. I requested it be re-opened and EVGA was swift in doing so. Thanks to their awesome support.
I gave up when flashing to .27 (I was at CO.O2 from factory) as it would still not let me break 109% PT and 460W in anything I did.
I ended up using it at CO.O2 with typical usage at around 430W.
I decided to reflash it now almost 2 years later and it is hitting on average 113% PT, with a max of around 495W. I don't know what I did differently but the card has finally begun to hit 500W!
If you do have a Rev 1.0 card your best bet is to flash to .27. It took me around 5-6 tries spread out over a year before it finally worked.
For reference I have an EKWB active backplate and block with 2 360mm x 60mm radiators in a full custom loop. PX-1000 PSU, 5950x, Dark hero, 32GB 3600 C14.
Wow! Sounds just like my 3090 ftw3 rev 1.0. New as in like a month old and I have a Ek front and back active wb on it. 460 seems to be the max on the OC switch.
post edited by AHowes - 2022/04/10 15:18:06
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
SyndicatedLife
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/12/22 10:39:36
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/10 19:00:18
(permalink)
From what I've gathered: Flashing the KINGPIN bios will let you use 520, but the PCIE uses 90w,, Pin1/2 use 170w, with Pin3 using 115w. Flashing the old revision 0.1 bios lets you use 500, but you have the same issue as KINGPIN with over spec use. 3090 FTW3 Ultra cards are at a hardware level not made correctly. 0.1 had component issues and 1.0 has the trace layouts wrong on the 8pins. They also use a 10a fuse instead of a 20a fuse on the PCI slot connector. I've made my offer over a few emails to customer service to pay for an upgrade to the cards which they really want people allowed to use 500w+ and that's the KINGPINs/3090 Ti's/etc. 2 deny's and last one is a back and forth which is going nowhere. I've always championed EVGA has the only manufacturer to get nvidia from, and I don't know if can trust the brand again, given the lack of response on this issue over the last year and more. This, after buying 3 hybrid 1080 Ti's, the 3080 12GB and now the 3090 FTW3 Ultra.
post edited by SyndicatedLife - 2022/04/11 06:55:20
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/10 19:28:10
(permalink)
Flashed my 3090 FTW3 Ultra rev 1.0 to the HydroCopper Bios and tested with Kombuster and quick test and bamb.. 500 watts and holding!
Prob would of worked prior but was too busy testing with 3Dmark and only seen around 460watts.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
SyndicatedLife
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/12/22 10:39:36
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/11 20:49:19
(permalink)
 I can't be without a GPU but hot damn that's ridiculous... every day I'm without one is hours lost for actual work... 5050 CAD... So what? 75 slot 150 pin1 150 pin2 90 pin3 Seems like pin3 isn't a 8pin, but a 6pin in disguise.
post edited by SyndicatedLife - 2022/04/11 20:50:32
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/04/13 02:34:52
(permalink)
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/05/03 13:08:41
(permalink)
AHowes
Flashed my 3090 FTW3 Ultra rev 1.0 to the HydroCopper Bios and tested with Kombuster and quick test and bamb.. 500 watts and holding!
Prob would of worked prior but was too busy testing with 3Dmark and only seen around 460watts.
Can't get that anymore.. no idea why. Went to older drivers I used prior thinking thst was it and no difference.. flashed back to the default stock bios and nope.. I don't have any other older Kombuster on my pc so don't understand it. EDIT: It was Furmark Donut! That's why.
post edited by AHowes - 2022/05/04 06:45:04
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
kaneki77
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2022/04/22 12:52:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2022/05/04 03:13:26
(permalink)
EVGA_JacobF
Important update 3/19/21:
Newer EVGA GeForce RTX 3090 FTW3 ULTRA cards will be shipping with the XOC BIOS already loaded on the secondary position. The below BIOS should ONLY be installed if your card DID NOT already have it applied.
We have a new BIOS that increases the maximum Power Target. This BIOS is only intended for the extreme overclocking user and does not have any other changes. Please note the following:
- This update will increase the power consumption while overclocking, and is recommended you have adequate cooling and power (850w+ Gold minimum) when using this.
- EVGA does not guarantee any performance increase or overclock while using this BIOS update.
Any other questions or concerns will be answered in this forum thread only. Please post below your results and feedback!
BIOS Instructions (Windows Installation):
- Download the correct .zip file below for your graphics card below.
- Extract the files to a location on disk.
- Make sure no programs are running in the background, and double click Update.exe
- Press "Y" to begin the update.
- DO NOT TURN OFF POWER OR RESET DURING THE UPDATE PROCESS!
- After update, restart PC.
EVGA GeForce RTX 3090 FTW3 - Updated 4/5/21 with Resizable BAR Versions. Important: If your card ALREADY came with the XOC BIOS in the secondary position, do not apply these updates:
- EVGA GeForce RTX 3090 FTW3 ULTRA – ) |
- EVGA GeForce RTX 3090 FTW3 - |
- EVGA GeForce RTX 3090 FTW3 HYBRID - |
NOTE: There are 2 BIOS's, one is for the BIOS when switched to the normal stock position, the other if switched to the OC position
If you wish to go back to the Default BIOS you can find them below:
EVGA GeForce RTX 3090 FTW3 ULTRA Default BIOS - |
EVGA GeForce RTX 3090 FTW3 Default BIOS - |
I try to download your bios and run it, but only showing blackscreen for hours after i begin the update. I press the keyboard, and it said update was aborted. Any help?  
|
notedmusic
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2021/08/28 19:50:04
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/05/12 16:02:57
(permalink)
"No display adapters were found that are compatible with this update." Issue on both bios (new and old) 3090 FTW Ultra Gaming. Can not reflash bios either old or new. Windows 11 x64 64gb ddr4 2tb ssd nvme 3090 FTW Ultra Gaming OC or Normal Switch Part # matches the zip file, but it won't work even in admin mode.
post edited by notedmusic - 2022/05/12 16:17:24
|
matthewr87
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2016/06/28 15:51:15
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/05/20 11:17:50
(permalink)
My RMA'd 3090 with serial starting 2219 is on the way. My 2014 card from 11/20 died last week. Is there any information regarding 2219 cards?
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/05/20 11:25:35
(permalink)
matthewr87
My RMA'd 3090 with serial starting 2219 is on the way. My 2014 card from 11/20 died last week. Is there any information regarding 2219 cards?
This won't tell you anything. RMA graphics cards receive a new serial number from our RMA department before going out. Every 30 Series card being sent out currently starts with 2219.
|
matthewr87
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2016/06/28 15:51:15
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/05/20 11:26:43
(permalink)
Ahhhh okay. Good to know. Thanks! Will all recently shipped out RMA 3090s have the XOC bios pre-installed?
post edited by matthewr87 - 2022/05/20 11:29:17
|
SyndicatedLife
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/12/22 10:39:36
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2022/06/06 16:53:24
(permalink)
EVGATech_LeeM
matthewr87
My RMA'd 3090 with serial starting 2219 is on the way. My 2014 card from 11/20 died last week. Is there any information regarding 2219 cards?
This won't tell you anything. RMA graphics cards receive a new serial number from our RMA department before going out. Every 30 Series card being sent out currently starts with 2219.
I'm at a loss for how they don't accept responsibility.
post edited by SyndicatedLife - 2022/08/08 15:18:24
|