Is there any way to confirm revision number of my card without physically pulling it out to check the marking? This is a replacement RMA card I received in March,  and it is working solid. But now I'm wondering if it is v0.1 or 1.0? Don't want to unseat the card. I'm lazy and if it ain't broke, I'm not touching it.

squall-leonhart

Arrowhead2010
Is there any way to confirm revision number of my card without physically pulling it out to check the marking? This is a replacement RMA card I received in March,  and it is working solid. But now I'm wondering if it is v0.1 or 1.0? Don't want to unseat the card. I'm lazy and if it ain't broke, I'm not touching it.

check if slot power is higher than 66w

Thanks. It's hovering just under 66w mostly, with a couple spikes to 66.7 with the Heaven Benchmark and GPU-Z. I guess I got lucky. Got my replacement right just when they started rolling out the new revision and I didn't even know to look for it when I installed.

squall-leonhart

Arrowhead2010
Is there any way to confirm revision number of my card without physically pulling it out to check the marking? This is a replacement RMA card I received in March,  and it is working solid. But now I'm wondering if it is v0.1 or 1.0? Don't want to unseat the card. I'm lazy and if it ain't broke, I'm not touching it.

check if slot power is higher than 66w

I posted a screen of my rev 1.0 above 506W on Board Draw and 69W PCIe, sadly the card is bad, check my posts if you want.

All the Best, Sergio!

razorhanny
 
My EVGA FTW3 3090 ULTRA GPU PCIe +12V Input Power max at 79.586W, do you think I should/could RMA it? I plan to keep this card untill the next gen comes and I'm afraid it'll be harder to resell if there's something wrong with it. Thank you.

I have the same issue and would also like to know the answer to this if anyone can help. 

Hi, just got my 3090. Its rev 1.0 and came with the latest bios. But it only pulls ~ 450 Watt. All seems fine except #3, there is only 100 Watt. Is that normal or an issue? Something I can do?

PCIe power is fine, i think 57 Watt. Its rev 1.0 board wo ok

Card is ftw3 ultra

Yes. If i remeber correctly Pos1 is 107% max and 450Watt and pos 2 is 119% but maxed out at 109% and 460Watt.

What is the latest serial numbers for the 3090 ftw3 ultra? There isn't one central thread for referncing all the different serial numbers and pcb version... I've been seeing people mention back lip card, rev. 1, etc....

What serial, rev. #, or whatever is EVGA sending out now as "the end all, fix all issues" card?

I have this exact card and I'm kind worried that it will sheet the bed at some point.

arestavo

jadcampbell

razorhanny
 
My EVGA FTW3 3090 ULTRA GPU PCIe +12V Input Power max at 79.586W, do you think I should/could RMA it? I plan to keep this card untill the next gen comes and I'm afraid it'll be harder to resell if there's something wrong with it. Thank you.

I have the same issue and would also like to know the answer to this if anyone can help. 

Post #2 of this thread has EVGA_Jacob's posts about a special RMA program for the 3090 FTW3.
 
As has been stated in this thread about 2000 times, GPU-Z reading >67W on the PCIE slot is out of tolerance. The PCIE spec in 75W max, but GPU-Z only reads 12V wattage and not 12V + 3V wattage (67 + 8 = 75). So if you're almost at 80W read, then in reality it's ~88W or more. Some motherboards might be able to handle it if it's a high end one with supplemental power, but it's still out of a universal specification that all manufacturers of PCIE components are supposed to follow or they have to take the PCIE compliant off of their product.

Aux PCIe Power will help a lot if you have a OC mobo. The only reason I see for RMA is if the card has those horrible jumps in clocks, mine was like that and with that problem no matter if you are in a custom waterblock it will go down while you bench/game and loose a lot of FPS.

Cheers!
 

ZachTullier2
What is the latest serial numbers for the 3090 ftw3 ultra? There isn't one central thread for referncing all the different serial numbers and pcb version... I've been seeing people mention back lip card, rev. 1, etc....

What serial, rev. #, or whatever is EVGA sending out now as "the end all, fix all issues" card?

I have this exact card and I'm kind worried that it will sheet the bed at some point.

as for my understanding rma program is sending rev 1.0 only...read what i posted about my rev 1.0 please

andressergio

ZachTullier2
What is the latest serial numbers for the 3090 ftw3 ultra? There isn't one central thread for referncing all the different serial numbers and pcb version... I've been seeing people mention back lip card, rev. 1, etc....

What serial, rev. #, or whatever is EVGA sending out now as "the end all, fix all issues" card?

I have this exact card and I'm kind worried that it will sheet the bed at some point.

as for my understanding rma program is sending rev 1.0 only...read what i posted about my rev 1.0 please

PCB 1.0 were reserved for 3090OC@evga.com program in the past so I imagine that regular RMA will send refurb 0.1 as part of RMA.
I read on the forums that even brand NEW devices from vendors are still 0.1 so I really don't understand why they are selling them unless they have HUGE stock of them already and % of failures are low.
 
can someone actually confirm a brand NEW device is 1.0 or still 0.1
 
at this point I would welcome any official statement what was wrong with all those 0.1.

Fire_2
EVGA - What is going on?!
I spent £100 sending my Ultra FTW Hybrid 3090 rev 0.1 card to you with proof of it pulling over 80watts on the PCI-E slot and only 465/470 watt board power in the original box which was like brand new with all the foam inner packaging,
 
and I've received my old card with no changes still same rev 0.1 and same serial numbers still only pulling 465/470 peaks in tests.
 
the box has been cut open from the front picture and generally in very poor state cant sell it later on in life like this and most of the nice foam inners gone.
 
I cant believe this is how you treat cards/customers?

I guess it was only mistake on their part and not on purpose. Probably related to current situation "NEW World tragedy"
Contact their support and they will probably send you advanced RMA with return label as an apology :-)
 
kind regards
Tomas

spider1701

Fire_2
EVGA - What is going on?!
I spent £100 sending my Ultra FTW Hybrid 3090 rev 0.1 card to you with proof of it pulling over 80watts on the PCI-E slot and only 465/470 watt board power in the original box which was like brand new with all the foam inner packaging,
 
and I've received my old card with no changes still same rev 0.1 and same serial numbers still only pulling 465/470 peaks in tests.
 
the box has been cut open from the front picture and generally in very poor state cant sell it later on in life like this and most of the nice foam inners gone.
 
I cant believe this is how you treat cards/customers?

I guess it was only mistake on their part and not on purpose. Probably related to current situation "NEW World tragedy"
Contact their support and they will probably send you advanced RMA with return label as an apology :-)
 
kind regards
Tomas

Cards that are failing with New World Game are red lips PCB rev 0.1 with the problem on the Power Draw and constant swings of Core Clocks no matter what you do, even at heavy load with VBios XC3 card will do the same on some games. ALL this I reported long time ago for ex with first release of Days Gone Game, did exactly what New World does but no one cared...Like this I have many many posts not only here but on other forums. The rev 0.1 card with the problems I mentioned gets locked on FULL LOAD GPU 100% at 1800-1825 Core (OC to 2100) with hot Temperatures no matter if you are on Air at Full Speed or Hybrid Kit. Some reported that on water (custom water block) this doesn't happen, but I didn't get to install a full cover block. With this I mean that you have a 2100 "stable" Core OC and in some games does this which was the main reason I entered the 3090 RMA Program.
 
All the Best, Sergio!

Jack-Rabbit
Black lips can also be Rev 0.1  :(

Indeed.  I have a Rev 0.1 card with black lips. The lip coloring doesn't indicate the revision of the card.

Guys
 
Since PX1 v1.2.2 takes forever to load, i tried to uninstall it, delete all and re install, now there's a new version 1.2.3 and same issue

Anyone?

Thanks, Sergio!