mahanddeem
Any insight from people who have this faster vram 1080ti on what boost clocks you're getting out the box?

You mean like this guy 3 posts before yours?
 

demon09

visualvb

demon09

DarkSnipa
Are these ftw3 elite being outfitted with MT58K256M321JA-120:A GDDR5X memory like the ones found on Titan Xp or do they only have overclocked 11GHz GDDR5X with little to no headroom to push further?

they have new chips that are 12ghz chips but. I am still waiting to see someone who gets one to overclock the memory and see if there is room to do that on these new moduals

I've had little time to do much testing but at first try I was able to get mine to 13GHz stable. Just for kicks I tried 14GHz but it crashed right away and my screen went blank forcing me to reboot. Not sure if it matters but this was on Normal bios and not OC (they renamed Master and Slave, FYI)

sounds like it has the same oc room. Like I tell lots of people make sure to test lower then13 ghz as higher is not always better with ecc ddr5x

Squall_Rinoa86
Wonder if they'll push a flash update for the bio's for the rest to have 12GHz to..
 

Negative...
 
From Jacob post #7

EVGA_JacobF
It is a new 12GHz memory chip.

 

Is anyone hitting the power limit on these cards?

Roicker
Any results on how high the memory on these can be overclocked?

one guy said he got 13000 which is about the same as the new titan xp so id gusse it has about the same extra oc room as the other aib cards. the question is how much does 130000 vs 12000 help?

Valtrius Malleus

demon09

Roicker
Any results on how high the memory on these can be overclocked?

one guy said he got 13000 which is about the same as the new titan xp so id gusse it has about the same extra oc room as the other aib cards. the question is how much does 130000 vs 12000 help?

With mining it will make all the difference. Probably around ~8Mh/s for Ether I would imagine. A 1080Ti gets about 35Mh/s so an extra 8 or more would be a great boon. I gave it a try and maxed out my memory at +1000MHz but with the power slider at 60% it didn't really hit those speeds, just used a higher frequency than it would have at stock. An extra 1000MHz would increase that further to gain even more performance but again, it won't be hitting those speeds at 60% power it would just be using an even higher frequency.
 
For gaming it would probably make an extra 2-3 frames at 4K, more if reducing the resolution but still around the 5% mark. I'm just basing this off my own experience overclocking the memory of my FE to +750MHz. Still, an extra 5% is great for nothing.

there is a point of dimishing return where say you oc to 12mhz and then you go to 13 you might not gain as much from 11-12oc as you did from 12-13 as the memory side of the card is less of a limit allready. But in the end a GTX 1080ti is not a very efficent mining card if it was we would have to deal with the problems amd gpus are. But it would be interesting if gaming perofmance still went up the same when going from 11k to 12k then 12k to 13k if both jumps produced the same % of fps increase in gaming I'd be surprised . But for 1080ti miners the higher memory clocks might be a golden ticket

mahanddeem
Is 1924mhz boost in BF1 bone-stock normal for this card? Or low side?

1924 is a good boost at stock for any card.

Tbh I wasn't overly impressed with mine. Ran pretty hot and loud compared to my previous card. Clocked pretty bad (for those who care only +300 on the mem). But that's the lottery. The dealbreaker was some high pich coilwhine on my sample.

Had another of the new FTW3 12Ghz this time it could do +550 (instead of +350) on the mem before artifact. Would really have liked to keep it. But the card has a very unpleasant howling sound from the fans at certain rpm, one fan in particular seemed to produce those sounds. Tried to fix it but no luck.

AHowes
Can someone tell me if this part # is the new 12ghz fasternmemory elite card?? Is all elite cards use the faster 12ghz memory?

11G-P4-6797-K1

6797 is a 12GHz model.

AHowes
Thanks sajin!

Your opinion on going from 2 1080 classifieds running 2175mhz to a single 1080ti elite smart or not for 4k for games like bf1,cod,doom,quake champions and witcher3. Usually fps gsmes support sli but thats seems to have changed.

Not a good idea imo. 2 1080's should outperform a single 1080 ti if sli is working.

Tried to research 1080 sli vs 1080ti and current info is like non assistant.

So I tested sli in some of my current games in 4k. Was pretty much shocked that a single 1080 overclocked to 2190mhz was doing such a great job. Once I removed the v-sync I was shocked to see around 80fps in bf1 with everything maxed. Turned on sli and I was seeing 100-150fps in 64 player multiplayer. So sli in direct x 11 is working fine. Even seen 97-99% usage for both cards.

Witcher III I was seeing 51-53 fps with a single card all settings maxed and hairworks off.. in sli the frame rate was 100-110.

In cod iw sli don't work and was seeing 80-90 fps since the frame rate is locked at 90.

Mgs5.. was stuck at 60 and could not find an option to remove v-sync.

So now a new thought... do I even need sli?? Seems to have enough power with a single card if the monitor can't shoe more then 60 fps anyways.

The 1080ti would be a tad faster then my 1080 even at 2190mhz??

Haha man the problems to think threw.. first will sli be even supported anymore to going from 1080sli to a single 1080ti be worth it to now do I even need 2 cards for 4k..

Seems like If I go back to the other monitor for gaming (Asus 27" 2560x1440 165fps the argument for sli would make more sense since is want to get close to 165fps. :/

Honestly i dont think so and will have to check agsan later. Did work for the testing I did last night but I'm remembering 2175mhz actually haha.. using procision x. Was shocked while testing and having the osd on and seeing 2190mhz and just thought that must be the right number. :)

Been a long while since I messed with it.. I know 175 and 1.50v is the main settings I use in the manual overclock. Prob accidently selelcted 200.

I know the first card wants to go faster but the second card was picky with the voltage being 1.50v.

Anyways.. currently at the dentist office with my wife.. she's getting her teeth cleaned and I'm still debating grabbing the 1080ti elite.

Seriously prob fine right were I'm at but since I gota clean my ek 780ti classified blocks cause it looks like corrosion going on in them and flush the water lines, I'm still debating seeing if I can be happier switching to a single card now for the future.

Sell one of the 2 1080 classifieds and give the other to my son and sell his 2 980s.

And yes my luck sucks as the new evga 1080ti ftw3 elite card has big problems!! Can't put a large load on the card without tossing up power/Voltage limits!!! Heat is fine at 50-53c on load. I can't run it in the firestrike 4k test at all without solid temp/power/Voltage limits coming up pretty much solid!!

I've even ran the card in debug mode with no boost mode active and it comes up with power and voltage limits!! :/ :/ seemed half ok with the firestrike extreme test which I think is just 1080 res.

So it's either a weak evga super nova 750watt psu going or another bad 1080!

Testing the elite card in my son's system since he had 980sli in it air cooled so I could swap it in there quick.

I gota make sure the card is fine before I remove all the water cooling as my 1080 classifieds are water cooled.

Sucks to be me.. it's either run and exchange the card or spend an hour pulling my psiu out from my main rig to the spare rig to test it.

AHowes
And yes my luck sucks as the new evga 1080ti ftw3 elite card has big problems!! Can't put a large load on the card without tossing up power/Voltage limits!!! Heat is fine at 50-53c on load. I can't run it in the firestrike 4k test at all without solid temp/power/Voltage limits coming up pretty much solid!!

I've even ran the card in debug mode with no boost mode active and it comes up with power and voltage limits!! :/ :/ seemed half ok with the firestrike extreme test which I think is just 1080 res.

So it's either a weak evga super nova 750watt psu going or another bad 1080!

Testing the elite card in my son's system since he had 980sli in it air cooled so I could swap it in there quick.

I gota make sure the card is fine before I remove all the water cooling as my 1080 classifieds are water cooled.

Sucks to be me.. it's either run and exchange the card or spend an hour pulling my psiu out from my main rig to the spare rig to test it.

what kind of clocks was it boosting to at stock? If you use percision and move the power limit up does it change ? I mean a card hitting a limit at max load under 4k is nothing new with gpu boost 3.0 something will show up as a limit of why it can't go faster . Maybe the 1080 classified's are different in that regard. But anything over 2000 MHz on a 1080ti is good unless the power limit and temp limit you see is making your cards clocks drop alot ?

And yes I've started out st defaults and then went and maxed out the power/temp sliders and voltage maxed.. started out with the card on the slave bios.