Spartacus09
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2011/05/21 14:19:26
- Location: Austin, TX
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/27 12:25:05
(permalink)
proxims
they don't have a product page up for the hybrids, so there is no way to get in the queue... I'd love to be able to queue, but instead I have to check this thread all the time.
Ah I'm in the queue for the ftw regular, I just plan to get one of the hybrid kits when they release. It'll cost a little extra but I prefer to have both air and aio options available anyway.
|
dominic2189
New Member
- Total Posts : 86
- Reward points : 0
- Joined: 2012/04/20 14:51:54
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/27 12:30:51
(permalink)
A queue system for the Hybrids/HC at this point in time wouldn't make sense. At least not until more regular 3080s are sold. The reason being, people that enter the Hybrid ques might finally get an air cooled 3080 this week, and no longer need a prebuilt card, but the standalone instead. It would skew the 'preorder' numbers drastically. Their best bet is to wait till either more cards sell or wait for the release to approach.
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA 30 Series HYBRID Updates
2020/10/27 12:46:02
(permalink)
yaggaz
kevinc313
This is a useful datapoint but the video itself is absolute rubbish.
Pushing fans 1100RPM. Stock 3090 Strix (390w?) Furmark.
120mm -> 66C
240mm -> 48C
360mm -> 44C
The 240mm Hybrid will work REALLY well on the 3080 with push pull fans.
Yeah the diminishing returns between 240 and 360 really drop off there. So then how much cooler would a stock 3080 run compared to 3090 stock? Math hurt brain ;_)
Consider these two delta-T's: - GPU to coolant temp - Coolant temp to ambient temp Increasing the rad size is only going to do so much. GPU to Coolant temp delta is probably like 10C under load, so the best they could do would be about 30C GPU in a 20C room with massive radiator and res (ambient coolant temp). 480mm rad about 39C, MO-RA3 360 about 34C. IMHO. The 240mm Hybrid on intake air with push pull fans should do about 45C-50C with a 450w FTW3.
post edited by kevinc313 - 2020/10/27 13:14:47
|
Endworld
Superclocked Member
- Total Posts : 148
- Reward points : 0
- Joined: 2014/10/07 03:33:55
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/27 13:06:24
(permalink)
I think I might try the Hybrid kit this time around. I'm a little worried about taking apart the GPU, but from what I've heard it looks more intimidating than it is in practice.
|
army165
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2018/04/13 01:52:21
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/27 21:02:24
(permalink)
Endworld
I think I might try the Hybrid kit this time around. I'm a little worried about taking apart the GPU, but from what I've heard it looks more intimidating than it is in practice.
I haven't done one in a while but it was a 1070 FE when I did, it wasn't terrible. Ton of damn screws to take out.
i9-9900k | AsRock Phantom Gaming 7 | 32GB 3200mhz Gskill Trident RGB | EVGA RTX 3080 FTW3 ULTRA | Artic Extreme II 360mm | EVGA G3 850w | Samsung 850 EVO 500GB, Crucial MX500 500GB, Crucial MX500 1TB, Sandisk 1TB NVME, Sabrent Rocket Q 2TB NVME | Lian Li O11 Dynamic XL |
|
yaggaz
FTW Member
- Total Posts : 1509
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: EVGA 30 Series HYBRID Updates
2020/10/27 21:18:31
(permalink)
kevinc313
yaggaz
kevinc313
This is a useful datapoint but the video itself is absolute rubbish.
Pushing fans 1100RPM. Stock 3090 Strix (390w?) Furmark.
120mm -> 66C
240mm -> 48C
360mm -> 44C
The 240mm Hybrid will work REALLY well on the 3080 with push pull fans.
Yeah the diminishing returns between 240 and 360 really drop off there. So then how much cooler would a stock 3080 run compared to 3090 stock? Math hurt brain ;_)
Consider these two delta-T's:
- GPU to coolant temp
- Coolant temp to ambient temp
Increasing the rad size is only going to do so much. GPU to Coolant temp delta is probably like 10C under load, so the best they could do would be about 30C GPU in a 20C room with massive radiator and res (ambient coolant temp). 480mm rad about 39C, MO-RA3 360 about 34C. IMHO.
The 240mm Hybrid on intake air with push pull fans should do about 45C-50C with a 450w FTW3.
Thank you. Looking forward to my Hybrid.
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|
S3V3RI7Y
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2020/09/30 12:41:58
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/27 21:41:16
(permalink)
It would be really nice to at least have EVGA include an optional cable adapter so we could tune the pump speed. Would be nice to have one already in the box so I don't have to go searching for the adapter that's made by some sketch company just to get the pump noises down to an acceptable level.
At least the 240 is good to have demoed by Linus recently. I'll be throwing the Noctua NF-A12's in push config into the rad and hopefully be swapping my Noctua industrial fans out for said rad fans as well. I've been really impressed with the performance so far using the A12 on the 120mm rad that's on the 2080 super hybrid I have now, and I can't wait to get the new card once stock gets a smidge better next month or so. (maybe?) The fans have needed an upgrade anyhow so I'm looking at a much quieter system overall once all of the parts come in and are all slapped together!
And just to ask, are they also going to release the hybrid kit for the 3070 as well? I never saw any direct confirmation as such so my friend will be excited to know!
|
jamexr
iCX Member
- Total Posts : 266
- Reward points : 0
- Joined: 2016/07/21 16:30:16
- Location: SLC, Utah, USA
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 03:46:41
(permalink)
The thermal putty Evga put on the 3000s cards this time is going to be a pain to remove/replace...
|
anon12377
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2011/01/27 16:30:13
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 08:36:12
(permalink)
Only good thing about Cyberpunk 2077 getting delayed is we might actually be able to get one of these cards before it's out.
...if we're luckier than a four leafed clover lol.
|
Ciddharthas
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/17 07:58:09
- Location: Boulder, CO, USA
- Status: offline
- Ribbons : 1
Re: EVGA 30 Series HYBRID Updates
2020/10/28 08:39:17
(permalink)
I will definitely be purchasing a hybrid kit. Even a slight improvement in temps would be worth it to me, since that will also come with a reduction in noise, and the 3080 ftw3 ultra is LOUD. I'm not saying I miss my 1080ti hybrid (the 3000 series definitely rocks), but I do miss how quiet it was.
CPU: i7 10700k @ 5.0 GHz with 360mm Corsair H150i Elite LCD cooler MB: MSI Z490 Meg Ace RAM: 64gb Corsair Dominator Platinum RGB @ 3466 MHz GPU: 3080 Ti FTW3 Ultra Hybrid Power Supply: Corsair HX1000i (1000 Watts) Primary Monitor: LG CX48 (4k OLED) Keyboard: Corsair K95 Platinum RGB Mouse: Corsair Scimitar Elite RGB Headset: Arctis Pro Wireless Mic: Elgato Wave 3 VR: Occulus Quest 2
|
farouche
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2017/08/03 12:26:35
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 09:36:52
(permalink)
PPPPPPLLLLLEEEEAAAAASSEEEEEE PUT UP A PRODUCT PAGE AT LEAST TO TEASE US WE NEED TO KNOWWWWWWWWWWWWWWWWWWW
Also is it definitely a 240? I have an ITX case so this will be interesting to squeeze in lol
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 09:39:02
(permalink)
jamexr
The thermal putty Evga put on the 3000s cards this time is going to be a pain to remove/replace...
Another reason I'm more interested in the pre applied hybrid card. Don't want to deal with the putty.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 09:40:10
(permalink)
farouche
PPPPPPLLLLLEEEEAAAAASSEEEEEE PUT UP A PRODUCT PAGE AT LEAST TO TEASE US WE NEED TO KNOWWWWWWWWWWWWWWWWWWW
Also is it definitely a 240? I have an ITX case so this will be interesting to squeeze in lol
240 was confirmed by Jacob a while back. I'll see if I can find the link.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
farouche
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2017/08/03 12:26:35
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 09:52:43
(permalink)
eg1122
240 was confirmed by Jacob a while back. I'll see if I can find the link.
Ah nice one thanks, no worries I'm sure I can track that down. I have a Fractal Nano S with a 280 in the front already. 120 at the back for the 1080ti hybrid was no problem but I guess the 240 will have to go on top...not sure if that's bad for the pump though? Should be alright I hope hahah!
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 10:20:34
(permalink)
farouche
eg1122
240 was confirmed by Jacob a while back. I'll see if I can find the link.
Ah nice one thanks, no worries I'm sure I can track that down. I have a Fractal Nano S with a 280 in the front already.
120 at the back for the 1080ti hybrid was no problem but I guess the 240 will have to go on top...not sure if that's bad for the pump though? Should be alright I hope hahah!
Having it in top is actually good for the pump. You want the radiator over the pump on AIO's
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:16:00
(permalink)
When does the que signup start?
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:16:49
(permalink)
When it releases in mid/late November
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:18:48
(permalink)
eg1122
When it releases in mid/late November
So I have to check the 3080 page six times a day for the next four weeks. Great.
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:21:23
(permalink)
I'm sure there will be an announcement on Twitter and on here from Jacob on when it will be posted. I imagine the info will be available the closer we get to it's actual release. So maybe in 2-3 weeks. Just follow Jacob on Twitter to get all the latest.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:23:48
(permalink)
farouche
PPPPPPLLLLLEEEEAAAAASSEEEEEE PUT UP A PRODUCT PAGE AT LEAST TO TEASE US WE NEED TO KNOWWWWWWWWWWWWWWWWWWW
Also is it definitely a 240? I have an ITX case so this will be interesting to squeeze in lol
It's been stated official by EVGA in the front page on this thread. You can see it here. farouche
eg1122
240 was confirmed by Jacob a while back. I'll see if I can find the link.
Ah nice one thanks, no worries I'm sure I can track that down. I have a Fractal Nano S with a 280 in the front already.
120 at the back for the 1080ti hybrid was no problem but I guess the 240 will have to go on top...not sure if that's bad for the pump though? Should be alright I hope hahah!
It's actually a great placement for the pump. The AIOs are never filled to the top, leaving some room for expansion and gasses internaly when it heats up. You want to position the AIOs where the rad usually sits higher than the pump head/block so all the air gets trapped in the radiator which top AIO/Hybrid installations allow. Even if it's in the front, you'll want the tubing coming and going from the bottom of the rad, not top. Great breakdown and explanation by Gamers Nexus in the video below:
post edited by GTXJackBauer - 2020/10/28 12:26:57
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:35:05
(permalink)
I wonder if there will be any RGB whatsoever. I'll be converting my FTW3 into a hybrid and I'll be giving up that beautiful RGB light bar EVGA made.
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:41:11
(permalink)
GTXJackBauer
It's actually a great placement for the pump. The AIOs are never filled to the top, leaving some room for expansion and gasses internally when it heats up.
I'm thinking about a Fractal mesh S2 or Lian Li Lancool mesh with a CLC280 front mount and 3080 (probably Ti/Super) Hybrid top mount, both intaking with push pull fans.
post edited by kevinc313 - 2020/10/28 12:50:40
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:46:35
(permalink)
KingEngineRevUp
I wonder if there will be any RGB whatsoever. I'll be converting my FTW3 into a hybrid and I'll be giving up that beautiful RGB light bar EVGA made.
I've asked Jacob about this and he said it would be different but there would still be RGB on it. Not sure how much since the renders don't show any.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
Hoggle
EVGA Forum Moderator
- Total Posts : 10103
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: EVGA 30 Series HYBRID Updates
2020/10/28 12:48:36
(permalink)
KingEngineRevUp
I wonder if there will be any RGB whatsoever. I'll be converting my FTW3 into a hybrid and I'll be giving up that beautiful RGB light bar EVGA made.
I would hope it would have some RGB since it can look really good and the cards have the header on them so it makes sense to do RGB to me.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA 30 Series HYBRID Updates
2020/10/28 13:21:36
(permalink)
kevinc313
GTXJackBauer
It's actually a great placement for the pump. The AIOs are never filled to the top, leaving some room for expansion and gasses internally when it heats up.
I'm thinking about a Fractal mesh S2 or Lian Li Lancool mesh with a CLC280 front mount and 3080 (probably Ti/Super) Hybrid top mount, both intaking with push pull fans.
I'm not a fan of 140mm AIOs since I feel the 120mms have better rad fans all around. Sure, you get tad more heat surface but I feel the fan is more important as well but to each their own at the end of the day. Plus, 140mm use up any wiggle room you'd have with a 120mm installed. As for push and pull, can't go wrong with that. Aren't you the one that 'tuned up' their 2000 series hybrid and good great temps on the 120mm? If so, I believe it was Noctua A12s in P/P but can't recall if it was you or someone else. lol!
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA 30 Series HYBRID Updates
2020/10/28 14:19:52
(permalink)
GTXJackBauer
kevinc313
GTXJackBauer
It's actually a great placement for the pump. The AIOs are never filled to the top, leaving some room for expansion and gasses internally when it heats up.
I'm thinking about a Fractal mesh S2 or Lian Li Lancool mesh with a CLC280 front mount and 3080 (probably Ti/Super) Hybrid top mount, both intaking with push pull fans.
I'm not a fan of 140mm AIOs since I feel the 120mms have better rad fans all around. Sure, you get tad more heat surface but I feel the fan is more important as well but to each their own at the end of the day. Plus, 140mm use up any wiggle room you'd have with a 120mm installed.
As for push and pull, can't go wrong with that. Aren't you the one that 'tuned up' their 2000 series hybrid and good great temps on the 120mm? If so, I believe it was Noctua A12s in P/P but can't recall if it was you or someone else. lol!
Hey yeah I've got a quad of A12's. I'm thinking them on the hybrid rad top mount intake and using the stock case fans (pull) with the CLC280 (fans push) front intake for CPU AIO. I could get the Lian-Li and CLC280 for under $250.
post edited by kevinc313 - 2020/10/28 16:16:03
|
yaggaz
FTW Member
- Total Posts : 1509
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: EVGA 30 Series HYBRID Updates
2020/10/28 14:25:36
(permalink)
farouche
PPPPPPLLLLLEEEEAAAAASSEEEEEE PUT UP A PRODUCT PAGE AT LEAST TO TEASE US WE NEED TO KNOWWWWWWWWWWWWWWWWWWW
This, definitely this!
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|
yaggaz
FTW Member
- Total Posts : 1509
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: EVGA 30 Series HYBRID Updates
2020/10/28 14:27:58
(permalink)
kevinc313
eg1122
When it releases in mid/late November
So I have to check the 3080 page six times a day for the next four weeks. Great.
Amateur
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA 30 Series HYBRID Updates
2020/10/28 15:54:51
(permalink)
Now I'm on the hunt for a 3080 Ti FTW3 Hybrid since it's rumored and there's the 6900XT to compete with. I'm OK with Q1 2021.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA 30 Series HYBRID Updates
2020/10/28 16:05:55
(permalink)
kevinc313
Now I'm on the hunt for a 3080 Ti FTW3 Hybrid since it's rumored and there's the 6900XT to compete with. I'm OK with Q1 2021.
 In push/pull A12s? 
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|