EVGA

Helpful ReplyEVGA 1080 Hybrid?

Page: << < ..1617181920.. > >> Showing page 16 of 62
Author
Post
Essentials Only Full Version
Vlada011
Omnipotent Enthusiast
  • Total Posts : 10126
  • Reward points : 0
  • Joined: 2012/03/25 00:14:05
  • Location: Belgrade-Serbia
  • Status: offline
  • Ribbons : 11
Re: EVGA 1080 Hybrid? 2016/07/12 02:03:32 (permalink)
This should be solution for all NVIDIA Founders Edition.
Many people bought cards and even think to back them because high temps.
EVGA Solution is nicest on market and proven with Maxwell generation, people were very satisfied last year.
 
http://www.evga.com/Products/Product.aspx?pn=400-HY-5188-B1
 

 
I suppose Founders Edition is maybe useful only with 80+% fan speed.
With such card in hand you need to risk, even if manufacturer don't allow customers to change nothing.
99% will nothing happen if you pay attention. I advice to people to use some cloth over screws if it's possible, and exactly proper size of tools, than screws will not be damaged... different thermal paste will not be problem. MX-4 is one of best and available everywhere.
 
post edited by Vlada011 - 2016/07/12 02:05:43

i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
http://www.evga.com
http://www.intel.com
http://www.nvidia.com
https://watercool.de
http://www.lian-li.com
https://www.youtube.com/watch?v=PHMun5xiRe0
 
https://xdevs.com/guide/2080ti_kpe/#intro
https://www.evga.com/articles/01386/evga-sr-3-dark/
 
 
 

 
 
#451
tolagarf
New Member
  • Total Posts : 48
  • Reward points : 0
  • Joined: 2013/11/12 10:34:28
  • Location: Denmark
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 02:10:02 (permalink)
I always use Noctua NT-H1 Thermal Grease, it's even better than MX-4
#452
Vlada011
Omnipotent Enthusiast
  • Total Posts : 10126
  • Reward points : 0
  • Joined: 2012/03/25 00:14:05
  • Location: Belgrade-Serbia
  • Status: offline
  • Ribbons : 11
Re: EVGA 1080 Hybrid? 2016/07/12 07:08:01 (permalink)
That's never big difference, actual difference is so small that people could use any of good thermal paste.
It's important to apply on clean and dry surface in the middle and to put heatsink over that and that's it, all job done.

i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
http://www.evga.com
http://www.intel.com
http://www.nvidia.com
https://watercool.de
http://www.lian-li.com
https://www.youtube.com/watch?v=PHMun5xiRe0
 
https://xdevs.com/guide/2080ti_kpe/#intro
https://www.evga.com/articles/01386/evga-sr-3-dark/
 
 
 

 
 
#453
Mayh3M-UK
New Member
  • Total Posts : 63
  • Reward points : 0
  • Joined: 2015/03/12 09:51:14
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 07:28:47 (permalink)
Vlada011
That's never big difference, actual difference is so small that people could use any of good thermal paste.
It's important to apply on clean and dry surface in the middle and to put heatsink over that and that's it, all job done.


Exactly. It's always amusing when someone claims their particular thermal paste is amazing. It's all about application.

i7 7700K | ROG Strix 1080 Ti OC | Acer Predator X34
#454
trilegdog
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2006/10/03 15:21:56
  • Status: offline
  • Ribbons : 1
Re: EVGA 1080 Hybrid? 2016/07/12 07:53:51 (permalink)
FinalForm7
Hey guys, on the hybrid kit, does the side light up with LEDs? I've got one on the way to cool down this noisy FE 1080 of mine

Twitter
 
Sagman12 ‏@sagman12PC Jul 8 @EVGA_JacobF
Does the "GTX Hybrid" Logo on the 1080/1070 hybrid kit light up?

Jacob Freeman
@sagman12PC yes
 
--------------
Jared Amen ‏@jamen_cenu Jul 8 @EVGA_JacobF
Just bought two. Just curious, because I'm that kind of person, will it have RGB LEDs such as the ones in the FTW/Classy?

Jacob Freeman
‏@jamen_cenu sorry not RGB
11:16 AM - 9 Jul 2016
 
post edited by trilegdog - 2016/07/12 09:12:41

Asus Formula VIII, i7-6700k, Tt Riing 360 AIO, 16GB Corsair Dom/Plat 3K,
EVGA GTX 1080Ti Black step-up, SS 850 Pro 512, 2xWD Blk 2TB, EVGA P2 1000w,
Dual Boot Win7Pro64 /Win10Pro, Tt Core X-9, SS2693HM 1900x1200, Fuzzy Dice

6181-KR Step-Up began 29 June, queue hit 29 Aug = 62 days
RMA 980Ti SC+ to EVGA 31 Aug. Recvd by EVGA 10:41 am 2 Sep
UPS track # issued 8 Sep - delivered 13 Sep 2:54 PM EST
HYBRID AIO 400-HY-5188-B1 Ordered 8 July - Recvd 15 July

EVGA 780i, E8400, 8GB OCZ (4x2), XPpro/Vista64
EVGA 8800 GTS G92 512 SLI (2), OCZ900MXS PS
EVGA 7950 KO SLI
lead, follow, or get out of the way
 
#455
bg8780
FTW Member
  • Total Posts : 1214
  • Reward points : 0
  • Joined: 2008/02/19 14:21:34
  • Status: offline
  • Ribbons : 4
Re: EVGA 1080 Hybrid? 2016/07/12 07:57:37 (permalink)
Mayh3M-UK
Vlada011
That's never big difference, actual difference is so small that people could use any of good thermal paste.
It's important to apply on clean and dry surface in the middle and to put heatsink over that and that's it, all job done.


Exactly. It's always amusing when someone claims their particular thermal paste is amazing. It's all about application.




I have a Hybrid cooler enroute. Should I even bother wiping off the paste that comes pre-applied to use a different paste?
#456
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: EVGA 1080 Hybrid? 2016/07/12 08:23:07 (permalink)
^
I wouldn't worry about it. If it's pre-applied you are good to go.
 

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#457
cmoney408
Superclocked Member
  • Total Posts : 150
  • Reward points : 0
  • Joined: 2014/12/09 19:17:00
  • Location: San Jose, CA
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 09:23:42 (permalink)
i had a 295x2 and replaced the thermal paste with Thermal Grizzly Kryonaut, it made a huge difference over the stock paste. its the best (non metallic) thermal paste you can get. Though, i also replaced the thermal pads with fujipoly on the caps and Grizzly Minus 8 pads on the memory.
#458
Mayh3M-UK
New Member
  • Total Posts : 63
  • Reward points : 0
  • Joined: 2015/03/12 09:51:14
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 11:39:23 (permalink)
bg8780
Mayh3M-UK
Vlada011
That's never big difference, actual difference is so small that people could use any of good thermal paste.
It's important to apply on clean and dry surface in the middle and to put heatsink over that and that's it, all job done.


Exactly. It's always amusing when someone claims their particular thermal paste is amazing. It's all about application.




I have a Hybrid cooler enroute. Should I even bother wiping off the paste that comes pre-applied to use a different paste?


As long as it's applied correctly (without any friction/flaws) you definitely don't need to. Just make sure your GPU is cleaned properly with isopropyl alcohol or thermal paste remover. I always use a thermal paste remover and then a surface purifier to make it look and feel completely untouched.

i7 7700K | ROG Strix 1080 Ti OC | Acer Predator X34
#459
bg8780
FTW Member
  • Total Posts : 1214
  • Reward points : 0
  • Joined: 2008/02/19 14:21:34
  • Status: offline
  • Ribbons : 4
Re: EVGA 1080 Hybrid? 2016/07/12 11:49:24 (permalink)
 
Mayh3M-UK
 



As long as it's applied correctly (without any friction/flaws) you definitely don't need to. Just make sure your GPU is cleaned properly with isopropyl alcohol or thermal paste remover. I always use a thermal paste remover and then a surface purifier to make it look and feel completely untouched.




I'm used to using alcohol and a coffee filter but not familiar with a surface purifier. Link plz?
#460
Mayh3M-UK
New Member
  • Total Posts : 63
  • Reward points : 0
  • Joined: 2015/03/12 09:51:14
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 11:53:36 (permalink)
bg8780
 
Mayh3M-UK
 



As long as it's applied correctly (without any friction/flaws) you definitely don't need to. Just make sure your GPU is cleaned properly with isopropyl alcohol or thermal paste remover. I always use a thermal paste remover and then a surface purifier to make it look and feel completely untouched.




I'm used to using alcohol and a coffee filter but not familiar with a surface purifier. Link plz?


http://www.arcticsilver.com/arcticlean.htm
 
This is the one I use. Very cheap on Amazon.

i7 7700K | ROG Strix 1080 Ti OC | Acer Predator X34
#461
Mayh3M-UK
New Member
  • Total Posts : 63
  • Reward points : 0
  • Joined: 2015/03/12 09:51:14
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 11:54:46 (permalink)
https://www.amazon.co.uk/Arctic-Silver-ArctiClean-Material-Purifier/dp/B000BKP306
 
Look at those reviews. It's no gimmick. 

i7 7700K | ROG Strix 1080 Ti OC | Acer Predator X34
#462
PasTecHi
Superclocked Member
  • Total Posts : 223
  • Reward points : 0
  • Joined: 2012/05/22 19:01:30
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 12:09:05 (permalink)
I might buy that....

i7 2600k 4.5ghz | Corsair H100i Hydro | Asus P8Z68-Gen3 | Asus Strix 970 | Corsair Vengeance 4x4gb 1600mhz | Kingston 120GB SSD | Seagate 3TB | 
#463
bg8780
FTW Member
  • Total Posts : 1214
  • Reward points : 0
  • Joined: 2008/02/19 14:21:34
  • Status: offline
  • Ribbons : 4
Re: EVGA 1080 Hybrid? 2016/07/12 12:43:04 (permalink)
Mayh3M-UK
https://www.amazon.co.uk/Arctic-Silver-ArctiClean-Material-Purifier/dp/B000BKP306
 
Look at those reviews. It's no gimmick. 


 Purchased. Thanks!
 
What's the top thermal compound these days? I haven't kept up with that in awhile.
#464
Mayh3M-UK
New Member
  • Total Posts : 63
  • Reward points : 0
  • Joined: 2015/03/12 09:51:14
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 12:56:01 (permalink)
bg8780
Mayh3M-UK
https://www.amazon.co.uk/Arctic-Silver-ArctiClean-Material-Purifier/dp/B000BKP306
 
Look at those reviews. It's no gimmick. 


Purchased. Thanks!
 
What's the top thermal compound these days? I haven't kept up with that in awhile.


I don't know what the top one is but from what I've read and seen, there's very little difference between them. Just get a known brand like Arctic Cooling or Noctua would be my advice. I personally get this: https://www.amazon.co.uk/...p;keywords=arctic+mx+4

i7 7700K | ROG Strix 1080 Ti OC | Acer Predator X34
#465
cmoney408
Superclocked Member
  • Total Posts : 150
  • Reward points : 0
  • Joined: 2014/12/09 19:17:00
  • Location: San Jose, CA
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 13:03:45 (permalink)
bg8780
Mayh3M-UK
https://www.amazon.co.uk/Arctic-Silver-ArctiClean-Material-Purifier/dp/B000BKP306
 
Look at those reviews. It's no gimmick. 


Purchased. Thanks!
 
What's the top thermal compound these days? I haven't kept up with that in awhile.




i said it earlier, Grizzly Kryonaut
http://overclocking.guide/thermal-paste-roundup-2015-47-products-tested-with-air-cooling-and-liquid-nitrogen-ln2/12/ 
#466
macmall
New Member
  • Total Posts : 39
  • Reward points : 0
  • Joined: 2007/06/08 16:48:44
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 17:29:17 (permalink)
Just got mine on, during OverWatch and Doom, 45-48c, down from 82c....I was scared as (Deleted for Language) doing this, nv messed with a GPU before. Took my time and so far so good, going to buy the Advanced RMA though just in case.

Will say this, the top 2 screws that connect the board and the metal thing, one of the screws you can't just screw in, you have to put that one washer on....The directions leave something to be desired as well.
post edited by XrayMan - 2016/07/12 19:15:10
#467
Beasthunt
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2015/05/25 00:49:35
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/12 20:41:01 (permalink)
macmall
Just got mine on, during OverWatch and Doom, 45-48c, down from 82c....I was scared as (Deleted for Language) doing this, nv messed with a GPU before. Took my time and so far so good, going to buy the Advanced RMA though just in case.

Will say this, the top 2 screws that connect the board and the metal thing, one of the screws you can't just screw in, you have to put that one washer on....The directions leave something to be desired as well.



That Hybrid cooler is Gods gift to nerds. I love it. EVGA cannot get enough credit for these cards, IMHO.
#468
ericc191
SSC Member
  • Total Posts : 707
  • Reward points : 0
  • Joined: 2008/09/01 20:36:50
  • Status: offline
  • Ribbons : 6
Re: EVGA 1080 Hybrid? 2016/07/12 21:13:27 (permalink)
I'm going to hold out for the Hybrid FTW. It may take time, but it'll be worth it.

Heatware
OS: W10 64
CPU: Intel Core i9-9900K @5GHz 1.28v
Cooling: Corsair H100i RGB
Mobo: Asus Z390i Gaming
RAM: G.Skill TridentZ Royal 16GB 3200MHz
SSD: Intel 660P 1TB | Samsung 850 EVO 1TB M.2
GPU: EVGA GTX 2080 Ti (Custom Hybrid) 2150MHz
PSU: Corsair HX1000i
Case: White Caselabs(RIP) Mercury S3
Display: Alienware AW3418DW 21:9 120Hz GSync
Mouse: Logitech G403 Wireless
Keyboard: Max Keyboard Blackbird
Audio: Infinity IL10 paired to SA-50 amp
#469
Udo_G
Superclocked Member
  • Total Posts : 200
  • Reward points : 0
  • Joined: 2015/11/17 22:56:19
  • Status: offline
  • Ribbons : 3
Re: EVGA 1080 Hybrid? 2016/07/12 21:26:07 (permalink)
macmall
Just got mine on, during OverWatch and Doom, 45-48c, down from 82c....I was scared as (Deleted for Language) doing this, nv messed with a GPU before. Took my time and so far so good, going to buy the Advanced RMA though just in case.

Will say this, the top 2 screws that connect the board and the metal thing, one of the screws you can't just screw in, you have to put that one washer on....The directions leave something to be desired as well.




Did you use the original thermal paste? 


#470
ericc191
SSC Member
  • Total Posts : 707
  • Reward points : 0
  • Joined: 2008/09/01 20:36:50
  • Status: offline
  • Ribbons : 6
Re: EVGA 1080 Hybrid? 2016/07/12 23:13:05 (permalink)
The pre applied stuff works well. You'll maybe shave off 2-3C using aftermarket.

Heatware
OS: W10 64
CPU: Intel Core i9-9900K @5GHz 1.28v
Cooling: Corsair H100i RGB
Mobo: Asus Z390i Gaming
RAM: G.Skill TridentZ Royal 16GB 3200MHz
SSD: Intel 660P 1TB | Samsung 850 EVO 1TB M.2
GPU: EVGA GTX 2080 Ti (Custom Hybrid) 2150MHz
PSU: Corsair HX1000i
Case: White Caselabs(RIP) Mercury S3
Display: Alienware AW3418DW 21:9 120Hz GSync
Mouse: Logitech G403 Wireless
Keyboard: Max Keyboard Blackbird
Audio: Infinity IL10 paired to SA-50 amp
#471
PasTecHi
Superclocked Member
  • Total Posts : 223
  • Reward points : 0
  • Joined: 2012/05/22 19:01:30
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/13 05:11:21 (permalink)
while everyone is out there enjoying their hybrid kits..im here patiently waiting for the hybrid ftw cards....patiently.....hopefully i get my new card before end july so i can buy 1...before out of stock :')

i7 2600k 4.5ghz | Corsair H100i Hydro | Asus P8Z68-Gen3 | Asus Strix 970 | Corsair Vengeance 4x4gb 1600mhz | Kingston 120GB SSD | Seagate 3TB | 
#472
Avisari
New Member
  • Total Posts : 48
  • Reward points : 0
  • Joined: 2015/05/07 13:36:32
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/13 05:30:28 (permalink)
Been wanting to upgrade my 780 classy since last year, but I held it off. This wait is almost unbearable... But it'll be worth it.
#473
PasTecHi
Superclocked Member
  • Total Posts : 223
  • Reward points : 0
  • Joined: 2012/05/22 19:01:30
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/13 06:41:09 (permalink)
in other news...

not bad...

i7 2600k 4.5ghz | Corsair H100i Hydro | Asus P8Z68-Gen3 | Asus Strix 970 | Corsair Vengeance 4x4gb 1600mhz | Kingston 120GB SSD | Seagate 3TB | 
#474
elezraita
New Member
  • Total Posts : 62
  • Reward points : 0
  • Joined: 2014/05/03 18:17:56
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/13 06:45:08 (permalink)
@Avisari: Same exact situation here, sir.
#475
elezraita
New Member
  • Total Posts : 62
  • Reward points : 0
  • Joined: 2014/05/03 18:17:56
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/13 06:49:02 (permalink)
PasTecHi
in other news...

not bad...


EVGA has it on the site for $429.99.
#476
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: EVGA 1080 Hybrid? 2016/07/13 06:54:43 (permalink)
PasTecHi
in other news...

not bad...


elezraita
PasTecHi
in other news...

not bad...


EVGA has it on the site for $429.99.


I almost bought one yesterday. lol

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#477
macmall
New Member
  • Total Posts : 39
  • Reward points : 0
  • Joined: 2007/06/08 16:48:44
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/13 06:55:46 (permalink)
Udo_G
macmall
Just got mine on, during OverWatch and Doom, 45-48c, down from 82c....I was scared as (Deleted for Language) doing this, nv messed with a GPU before. Took my time and so far so good, going to buy the Advanced RMA though just in case.

Will say this, the top 2 screws that connect the board and the metal thing, one of the screws you can't just screw in, you have to put that one washer on....The directions leave something to be desired as well.




Did you use the original thermal paste? 



Yep, I just cleaned off the old stuff and put on the heat sink.
#478
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: EVGA 1080 Hybrid? 2016/07/13 06:56:58 (permalink)
I asked Jacob via twitter if there was any updates on the Hybrid this morning. Hopefully he has time to respond.

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#479
macmall
New Member
  • Total Posts : 39
  • Reward points : 0
  • Joined: 2007/06/08 16:48:44
  • Status: offline
  • Ribbons : 0
Re: EVGA 1080 Hybrid? 2016/07/13 06:58:05 (permalink)
Beasthunt
macmall
Just got mine on, during OverWatch and Doom, 45-48c, down from 82c....I was scared as (Deleted for Language) doing this, nv messed with a GPU before. Took my time and so far so good, going to buy the Advanced RMA though just in case.

Will say this, the top 2 screws that connect the board and the metal thing, one of the screws you can't just screw in, you have to put that one washer on....The directions leave something to be desired as well.



That Hybrid cooler is Gods gift to nerds. I love it. EVGA cannot get enough credit for these cards, IMHO.



I agree 100%, WC is the way of the future. All cards should be under water at this point. Theses fans and these huge heat sinks suck for many reasons. Only had those two complaints and really those aren't much to complain about. 
#480
Page: << < ..1617181920.. > >> Showing page 16 of 62
Jump to:
  • Back to Mobile