With 2.01, I do not have the atom ratio available in the BIOS with the 13700KF... bug.

Classified with a 12600k, everything is working so far. 

Try loading an OC profile of those available in the bios and then modify it according to your CPU and ddr5 memories. To me with my 12900K, G.Skill Trident Z5 6400 cl32 and Suprim X 4090 everything works. Rebar, usb ports etc. Evga Z690 Dark Kingping

zippytek

babayega
1.15 bios bug - after changing PLL voltage from a loaded profile it gets stuck on 06 post code. work around - cmos and change PLL along with the other changes. 

Any reason you’re still on 1.15? Still on adl?

yes ADL with MDIE. performance issues in one of the games i play. i dont know why exactly, havnt spent enough time trouble shooting why. but same exact settings worse performance on 2.01 bios. only diff i have seen between the 2 bioses is, 2.01 bios can train 7200 without retries, but both the bios cant stabilize 7.2k regardless of timings etc(1t and 2t). Also i have noticed one thing.. if u run pmic mode auto, vccsa needs to be auto, and only change cpu vddq, load a profile from cmos with auto pmic/vccsa override (any voltage) override vddq(any voltage) it will boot no problem, but if u change any timing after u loaded the profile it will hang 54. also smth is weird with locking SA(auto pmic mode), luumi posted a vid with the z790 dark and he said to keep vccsa to auto and change cpu vddq instead(he was running pmic auto 8k adie rpl). 

murlo26
I sold my 12900k a while back in anticipation of going to 13900k. Just been using my backup PC since. Can I update the BIOS of my Z690 kingpin board without a CPU or if I have my 13900k in there? I haven't used Kingpin boards much before, always used ASUS but had a long fiasco with the Z690 apex which caused me to look elsewhere. Sorry if this has been answered, low on time currently and couldn't read everything. 

use USB bios flash back. read the manual for instructions. 

babayega

zippytek

babayega
1.15 bios bug - after changing PLL voltage from a loaded profile it gets stuck on 06 post code. work around - cmos and change PLL along with the other changes. 

Any reason you’re still on 1.15? Still on adl?

yes ADL with MDIE. performance issues in one of the games i play. i dont know why exactly, havnt spent enough time trouble shooting why. but same exact settings worse performance on 2.01 bios. only diff i have seen between the 2 bioses is, 2.01 bios can train 7200 without retries, but both the bios cant stabilize 7.2k regardless of timings etc(1t and 2t). Also i have noticed one thing.. if u run pmic mode auto, vccsa needs to be auto, and only change cpu vddq, load a profile from cmos with auto pmic/vccsa override (any voltage) override vddq(any voltage) it will boot no problem, but if change any timing after u loaded the profile it will hang 54. also smth is weird with locking SA, luumi posted a vid on z790 dark and he said to change cpu vddq and vccsa to auto.. 

interesting...there is something very bizarre happening with 1-2T. i think i detailed my a die experience here over the weekend, but i managed to get 7800! 1T!! to post (and it posts FASTER than i've ever seen) so this leads me to believe there's a bug either in the mem controller voltages, or possibly an issue with tRCD on raptor lake since apparently this timing is now decoupled to tRCDRD / tRCDWR?
 
whatever it was, it looks like they addressed it in the forthcoming bios rev, as biso biso posted geek stable a die + raptor lake at 8500+ C34 2T this morning. 
 
m die seems way stronger on rpl too, so it will be interesting to see where this all lands when we have more data from folks testing a and m die on the new gen across z690 and z790
 

TheAffxct

 
whatever it was, it looks like they addressed it in the forthcoming bios rev, as biso biso posted geek stable a die + raptor lake at 8500+ C34 2T this morning. 
 


@zippytek
Wait up, biso biso was doing 8500C34-2T on the Z690 Dark with the new BIOS?



Well lets hope they release the BIOS today. Would be nice to be able to run above 7200 CL32 again with my A-Die and 13900K. 

Apparently some folks on twitter are testing 2.02 BIOS and it helps a ton.
 

HUGE UPDATE! I’m testing out Beta BIOS 2.02 for the Z690 DARK Kingpin, and it fixes EVERYTHING!!! Just posted 7600MHz! Now I did have issues installing it, but now everything is running great. Thank you
@EVGA_JacobF
for listening to feedback 
While in my opinion this BIOS should have been available day 1, EVGA did fix it very quickly, and more importantly were very helpful and open to feedback. I retract my statement about avoiding EVGA boards and actually feel more confident in purchasing their products now.
Posted 8000MHz CL34 on the 13600K now 

 
Also, I'm not sure if this user is actually one of you under a different handle lol, so apologies if I'm not tagging you appropriately. I was just excited to see they're making progress towards a more stable version.

frankd3

B0baganoosh
Apparently some r are testing 2.02 BIOS and it helps a ton.
 
Also, I'm not sure if this user is actually one of you under a different handle lol, so apologies if I'm not tagging you appropriately. I was just excited to see they're making progress towards a more stable version.

Graphically Challenged might be somebody here? I doubt it.
Did you ever see his videos? The guy acts really weird. Actually over acts is the right description.

I would do the same to get my hands on this bios earlier xD

TheAffxct

frankd3

B0baganoosh
Apparently some r are testing 2.02 BIOS and it helps a ton.
 
Also, I'm not sure if this user is actually one of you under a different handle lol, so apologies if I'm not tagging you appropriately. I was just excited to see they're making progress towards a more stable version.

Graphically Challenged might be somebody here? I doubt it.
Did you ever see his videos? The guy acts really weird. Actually over acts is the right description.

Woah woah calm down XD. Connor is a stud. Literally the coolest dude in the scene right now. He regularly responds to my tweets and I’m a certified nobody. He also does things for the OC scene that other YouTubers and influencers/insiders don’t. He legit went and got info for us on a BIOS and reported his beta testing. Stuff like this is amazing being that we would’ve otherwise been left out in the cold.

I was only referring to the way he acts in the video which is a style he uses on purpose. Actually makes me laugh. I wouldn't watch it if I didn't think it had value.
I actually saw him act normal once and seems like a good guy.
I really didn't mean that to be an insult.
 
EDIT: But I guess it did sound that way.

My dark board is sitting in the corner where’s my test bios?

frankd3

TheAffxct

frankd3

B0baganoosh
Apparently some r are testing 2.02 BIOS and it helps a ton.

Also, I'm not sure if this user is actually one of you under a different handle lol, so apologies if I'm not tagging you appropriately. I was just excited to see they're making progress towards a more stable version.

Graphically Challenged might be somebody here? I doubt it.
Did you ever see his videos? The guy acts really weird. Actually over acts is the right description.

Woah woah calm down XD. Connor is a stud. Literally the coolest dude in the scene right now. He regularly responds to my tweets and I’m a certified nobody. He also does things for the OC scene that other YouTubers and influencers/insiders don’t. He legit went and got info for us on a BIOS and reported his beta testing. Stuff like this is amazing being that we would’ve otherwise been left out in the cold.

I was only referring to the way he acts in the video which is a style he uses on purpose. Actually makes me laugh. I wouldn't watch it if I didn't think it had value.
I actually saw him act normal once and seems like a good guy.
I really didn't mean that to be an insult.
 
EDIT: But I guess it did sound that way.

Ah nvm then, my bad. Kinda wasn’t sure.

it's a beta, better to send it and let us test it. we'll report any bugs

Same story for me.  Got my 13900k.  My 6400 tune on M-die with fairly tight timings seems stable, but no post above 6600 even with super lose timings. Tried various voltages but can't even post at 7000 which I had working at 1t with my 12900k.  That tune does not post for sure.  
 
Guess I'll wait for 2.02 as well and hope for better results.
 
The good news is no issue getting in to the bios with my TUF 4090.

Gadfly
I can post 7800C34 1T with 12900KS, a-die and bios 1.15 without an issue.

7600C34 1T can run y-cruncher stable.

Have not tried new bios yet.

Yes on 1.15 and 12900KS. On 13900K and 2.01 it's not happening.