I’m voting electro migration.

rjbarker

GTXJackBauer

rjbarker
 
 
With that gorgeous build and 1000D I sure hope you have WB's on em .....like my 900D that 1000D is a WC'ing Case with sooooo much room for radiators....pumps and rez... ....
If and when I ever swap out my 900D it will likely be to the 1000D !!! Like the swing out doors and glass vs plexi...!!!

It's also designed to hold another desktop so you can cool off two PC's in one case. lol  It's a beast of a case.

If its anything like my 900D...with all the WC'ing in there...+ almost 2 Liters of Coolant...has to weight close to 75 lbs or so.....its crazy that anyone would use this case unless 2 Boards and / or WC'ing......I hate tight cases when installing Loops.....the cable management side is incredible....sooo much room!!! My wife would s%&*t seeing Purolator show up with this ....sort of like the box the Dell Alienware Ultrawide showed up in !!!

I feel you fam.  I dread it when I have to move my 900D like I have the last few weeks on troubleshooting.  I feel like my case weights 150-200lbs but it's probably less than that but the way you hold on to it moving to the next room for dear life while slowly losing your grip and hoping you get to the table asap.  Till this day I'm really curious how much this case weights with everything in it.  I can only imagine having a 1000D.  I don't think I'll be moving that thing around without a dolly. lol
 
Regardless, in a week or two, I will be wasting more fresh fluid (lol!) while purchasing 2 1 Liter bottles since they don't have 5L chugs in stock from the etailers around here (Modmymods/PPCS) to change out my old bay reservoir and pumps (1 dead) for a EK Cylinder Reservoir (My first) installed onto a EK Revo D5 PWM pumps in serial and install it on the side of one of them HD cages.  Been planning it out the last few days on how to go about this and have the best experience as opposed to the pain of filling a bay res, etc and not being able to run the pumps at full bore since the bay res was too shallow while sucking in air. 

Ok enough of my story, back to you Barker!  

GTXJackBauer

rjbarker

GTXJackBauer

rjbarker
 
 
With that gorgeous build and 1000D I sure hope you have WB's on em .....like my 900D that 1000D is a WC'ing Case with sooooo much room for radiators....pumps and rez... ....
If and when I ever swap out my 900D it will likely be to the 1000D !!! Like the swing out doors and glass vs plexi...!!!

It's also designed to hold another desktop so you can cool off two PC's in one case. lol  It's a beast of a case.

If its anything like my 900D...with all the WC'ing in there...+ almost 2 Liters of Coolant...has to weight close to 75 lbs or so.....its crazy that anyone would use this case unless 2 Boards and / or WC'ing......I hate tight cases when installing Loops.....the cable management side is incredible....sooo much room!!! My wife would s%&*t seeing Purolator show up with this ....sort of like the box the Dell Alienware Ultrawide showed up in !!!

I feel you fam.  I dread it when I have to move my 900D like I have the last few weeks on troubleshooting.  I feel like my case weights 150-200lbs but it's probably less than that but the way you hold on to it moving to the next room for dear life while slowly losing your grip and hoping you get to the table asap.  Till this day I'm really curious how much this case weights with everything in it.  I can only imagine having a 1000D.  I don't think I'll be moving that thing around without a dolly. lol
 
Regardless, in a week or two, I will be wasting more fresh fluid (lol!) while purchasing 2 1 Liter bottles since they don't have 5L chugs in stock from the etailers around here (Modmymods/PPCS) to change out my old bay reservoir and pumps (1 dead) for a EK Cylinder Reservoir (My first) installed onto a EK Revo D5 PWM pumps in serial and install it on the side of one of them HD cages.  Been planning it out the last few days on how to go about this and have the best experience as opposed to the pain of filling a bay res, etc and not being able to run the pumps at full bore since the bay res was too shallow while sucking in air. 

Ok enough of my story, back to you Barker!  

I built a wooden platform with wheels on it...the 900D sits on that...at least you can roll it around!!!!

juggar
Bought a 2080 Ti XC Ultra on Oct 26th from EVGA store. Its been having a LOT of "rendering device lost" issues with overwatch, Black Ops 4 and PUBG (was in the pubg crash XML file as Unreal Engine is exiting due to D3D device being lost. (Error: 0x887A0006))
 
I was in severe denial about all this for weeks but its been getting worse, could not even get through a PUBG game today without a crash to desktop. The moment I knew I was done for was when I was in lobby on spawn island in PUBG and flashing red orbs were appearing all over the screen. 
 
Never seen that before in any game until today when the crashes were non stop. And now it wont stop with the red orbs on pubg. I think shes a goner guys...... probably that "GDDR6 memory" issue. 
 
I think im going to go to bestbuy and get a founders RTX 2080 and wait the inevitable few weeks for my RMA..... I cant be without a GPU for days while they cross ship me one..... At least ill get the free games and ill be able to return(or resell if need be) the 2080 after I get my RMA back. 

If you can afford it a useable spare never hurts

I'm now having this issue on my second 2080Ti XC Ultra. The first one had an issue with RGB. This replacement began artifacting and freezing in every game just this week, and slowly but surely, it's getting worse.

This card hasn't been over clocked or seen consistently high temps. I really don't understand what the deal is. So disappointed with Nvidia's defective line this time around. $1300 is a lot of money.

TjJ71
Are all these RMA's the reason for the price increase on the ti's?

No

Same here. 2080 ti XC. 

My replacement ftw3 is getting ready to be RMA'd
First one artifacted second one freezes as soon as heavy 3D load is applied. Does fine in light games and regular browsing but locks up and goes black screen on stuff like deus ex and odyssey

xblackvalorx
They just called me to let me know my replacement card may not be a NIB even though they at first assured me it would be.
This entire situation is getting more and more frustrating, as it seems every different rep tells a different story.
$1500 and I haven't had two weeks of owning a stable card and now I may wind up with a refurb. Yay.

Ouch. Sorry to hear that. I'm fearing the same when I begin the RMA process for my $1300 paperweight.

bcavnaugh
Still No "Anyone still having issues with artifacts + freeze with rtx 2080 ti?" on any of my Cards.

Glad to hear it Bcavnaugh....im waiting for the XC Gaming to be available and just "may" pull the pin on 2 ;) ....been eying them up for awhile now.....I saw they were available at Evga but want to purchase within Canada....Once I get them I'll run them on my older RIVE Board w 3930K to test prior to installing EK Blocks.

My 2070 was artifacting. I just RMA it. Better to do it now than later.

I’d dispute the transaction.

dalten22

xblackvalorx
They just called me to let me know my replacement card may not be a NIB even though they at first assured me it would be.
This entire situation is getting more and more frustrating, as it seems every different rep tells a different story.
$1500 and I haven't had two weeks of owning a stable card and now I may wind up with a refurb. Yay.

The retail box literally just the card and a tiny piece of paper.  Honestly if the card doesn't have a lot of scratches (why would it?), and it works like it should, I wouldn't care one bit since it's under warranty by probably the best AIB out there.  You still have your original box etc right in case you want to sell it later? 

I'm having enough issues with brand new cards, don't wanna take my chances with a refurb, and again. It isn't what I paid for. Most expensive mainstream consumer GPU ever, I'd like to actually have a working card, with 0 scratches.

I just got my XC Gaming 2080ti, and started to have crashing, freezing, blue screens, and then......the space invaders artifacts. It would crash randomly and totally freeze up any kind of overclock was applied. It would also get stuck at 1350mhz. So, typical bad 2080ti symptoms. Already have RMA process started, but just disappointed that this issue still remains. Looks like it was a bigger and more wide spread issue than Nvidia stated. What was embarrassing is that I had my friend come over to check out my new build and they all got to witness the card crashing. I was trying to show off my EVGA only build with EVGA 2080ti, X299 Dark, PSU, Keyboard, Mouse etc. Needless to say, they were not impressed. Fingers crossed the next card works.

Got 2 XC Gaming 2080 Ti, 1 for my brother, and 1 for me. My brother's last for 40 days-ish before it keeps having the 'nvlddmkm error' on game, tried so many things but the only workaround is doing the -999MHz on memory (-49 works at first, then need -149, -199 and so on and so on). The second card, i put EK block on it since day 1, but now starts having frequent 'nvlddmkm' issue also after 40 days-ish using the same driver since day 1. Never got artifact or space invader tho. Debug mode also crash, the only thing that works is the -999MHz memory, hopefully it wont ask for even lower than that eventually since precision only allow that much.