sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/06 14:58:52
(permalink)
Cool GTX
I would Check/ change the TIM the GPU
Done that. No difference. Doesn't matter now since its being replaced.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/06 15:21:58
(permalink)
dwexpress
Xero717
AHowes
Anorher member attempted to return the card due to low boost clock over his other card and evga refused.
So good luck!
You have 15 days to submit an RMA request and have to be approved to get a return. They will also try to charge you 15% restocking fee and return shipping.
No idea what the 15 day return window is for when you cant just return the card unless its defective..
They let me return it, I just have to eat the restocking fee, RMA was approved. I have a feeling he may have tried after the 14 days from receiving it, which they would deny it then.
Yes mine was out of the 14 day for a return/refund but with mine it wasn't just the low boost which i could have lived with, mine it was the issue of the boost clock changing all the time. In SLI with one card maintaining its boost clock all the time and not changing and the other card always changing the boost clock from 2010 to 1975 to 2000 for some reason it was just impossible to stay stable. I called EVGA and after describing better what was going on they as well agreed to do a replacement RMA for me which is what i wanted originally not a return/refund.
Oh ok. I thought they told ya to eat it.. that's different if you only wanted a exchange of card anyways.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/06 15:24:14
(permalink)
Xero717
AHowes
Sounds like super low voltage. Which was the first thing I noticed from mine.. also a bench would get real flaky with real low voltage.
What settings did you try in the CT?
Did you ever use a dmm to probe the actual GPU voltage? Done that for stock settings?
Loadline 0 or 1 would pretty much get the idle voltage to what you set in the CT tool but it will drop on load. Hopefully you didnt try like LL 10.
I've found too low of a voltage can seriously kill performance. Close to 1000 points I've observed.
1) No
2) I tried several different LLC settings, and voltage as high as 1.15 in CT. At that point it was just adding a bunch of heat... My card did not scale well with voltage at all, but I also wasn't running LN2.
You set 1.15v in CT or that was the voltage at load? I guess I need to post all my findings to explain it better. Another diner out and beer.. I get aggressive when I drink I bet. I'm a nice guy really.. easy going. Fire temper at times though.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: 2080ti Kingpin Stays at 2130
2019/05/06 15:29:59
(permalink)
Drop The Beer and Post your Great Findings 
|
Xero717
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2012/03/29 05:47:53
- Status: offline
- Ribbons : 0
Re: 2080ti Kingpin Stays at 2130
2019/05/06 15:44:02
(permalink)
dwexpress
Yes mine was out of the 14 day for a return/refund but with mine it wasn't just the low boost which i could have lived with, mine it was the issue of the boost clock changing all the time. In SLI with one card maintaining its boost clock all the time and not changing and the other card always changing the boost clock from 2010 to 1975 to 2000 for some reason it was just impossible to stay stable. I called EVGA and after describing better what was going on they as well agreed to do a replacement RMA for me which is what i wanted originally not a return/refund.
I'm glad they made things right for you. I was hoping they'd do an exchange for me, but no such luck. Hope your new card is a good one.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/06 15:45:08
(permalink)
bcavnaugh
Drop The Beer and Post your Great Findings
More beer first.. then brave for lots of voltage lol
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
emmett
SSC Member
- Total Posts : 514
- Reward points : 0
- Joined: 2008/03/30 23:42:22
- Status: offline
- Ribbons : 2
Re: 2080ti Kingpin Stays at 2130
2019/05/06 15:47:57
(permalink)
Currently using Gigabyte Z370 Aorus Gaming 7 EVGA 2080 TI KingPin Intel 9900K GSkill 3200 EVGA G2 1300
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: 2080ti Kingpin Stays at 2130
2019/05/06 15:52:34
(permalink)
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/06 16:01:17
(permalink)
emmett
This is just throttling in the background and the software it just not detecting it right? and the score is low.
https://www.3dmark.com/fs/19188219
Yeah I pulled 2360 out the first night and TiN barked about it saying it's not really running stable at that speed.. need -100c outer space tempts to really run that speed. Lower clock and crank voltage over 1.1+ voltage and try again. Think 2160-2190 and 1.13+ GPU voltage and LL0/1 and 8300+ mem and tell me how it scores. K|NGP|N!!!
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
emmett
SSC Member
- Total Posts : 514
- Reward points : 0
- Joined: 2008/03/30 23:42:22
- Status: offline
- Ribbons : 2
Re: 2080ti Kingpin Stays at 2130
2019/05/06 18:20:34
(permalink)
So just playing a bit. 1.093 with load line 1 holds 1.075 under load. put it at 2205. Higher graphics and combined scores. lower physics cause I had HT off. but much better than the 2340 :) https://www.3dmark.com/3dm/35930736 Also is droop under load good for GPU like it is beneficial for CPU? Or no? If so I would not want to use 0 then.
Currently using Gigabyte Z370 Aorus Gaming 7 EVGA 2080 TI KingPin Intel 9900K GSkill 3200 EVGA G2 1300
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: 2080ti Kingpin Stays at 2130
2019/05/06 18:22:41
(permalink)
emmett
So just playing a bit. 1.093 with load line 1 holds 1.075 under load. put it at 2205.
Higher graphics and combined scores. lower physics cause I had HT off. but much better than the 2340 :)
https://www.3dmark.com/3dm/35930736
Also is droop under load good for GPU like it is beneficial for CPU? Or no? If so I would not want to use 0 then.
 https://www.3dmark.com/compare/fs/19188219/fs/19262211Yep! HT Enabled, The More Cores or Threads the Better.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/06 18:39:15
(permalink)
Xero717
dwexpress
Yes mine was out of the 14 day for a return/refund but with mine it wasn't just the low boost which i could have lived with, mine it was the issue of the boost clock changing all the time. In SLI with one card maintaining its boost clock all the time and not changing and the other card always changing the boost clock from 2010 to 1975 to 2000 for some reason it was just impossible to stay stable. I called EVGA and after describing better what was going on they as well agreed to do a replacement RMA for me which is what i wanted originally not a return/refund.
I'm glad they made things right for you. I was hoping they'd do an exchange for me, but no such luck. Hope your new card is a good one.
I don't think it can be any worse, won't take long to find out, shows shipped and set for delivery tomorrow.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/07 15:40:54
(permalink)
So i received the replacement card today and its running almost perfectly identical clocks-voltages as the good card i kept, moved me into the single card #9 HOF Port Royal with a score of 10619 on the 2nd run with it.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: 2080ti Kingpin Stays at 2130
2019/05/07 15:56:00
(permalink)
dwexpress
So i received the replacement card today and its running almost perfectly identical clocks-voltages as the good card i kept, moved me into the single card #9 HOF Port Royal with a score of 10619 on the 2nd run with it.
 Hall of Fame is down from my Location, they must be doing updates.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/07 16:04:13
(permalink)
bcavnaugh
dwexpress
So i received the replacement card today and its running almost perfectly identical clocks-voltages as the good card i kept, moved me into the single card #9 HOF Port Royal with a score of 10619 on the 2nd run with it.
Hall of Fame is down from my Location, they must be doing updates.
Yeah its been down for about an hour now i believe, i figured doing updates as well.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080ti Kingpin Stays at 2130
2019/05/07 16:40:59
(permalink)
dwexpress
Xero717
dwexpress
Yes mine was out of the 14 day for a return/refund but with mine it wasn't just the low boost which i could have lived with, mine it was the issue of the boost clock changing all the time. In SLI with one card maintaining its boost clock all the time and not changing and the other card always changing the boost clock from 2010 to 1975 to 2000 for some reason it was just impossible to stay stable. I called EVGA and after describing better what was going on they as well agreed to do a replacement RMA for me which is what i wanted originally not a return/refund.
I'm glad they made things right for you. I was hoping they'd do an exchange for me, but no such luck. Hope your new card is a good one.
I don't think it can be any worse, won't take long to find out, shows shipped and set for delivery tomorrow.
Sweet news buddy!
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Xero717
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2012/03/29 05:47:53
- Status: offline
- Ribbons : 0
Re: 2080ti Kingpin Stays at 2130
2019/05/07 18:03:37
(permalink)
dwexpress
So i received the replacement card today and its running almost perfectly identical clocks-voltages as the good card i kept, moved me into the single card #9 HOF Port Royal with a score of 10619 on the 2nd run with it.
Nice!
|