EVGA

Answered1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% (Issue has been fixed, see op)

Page: < 12345.. > >> Showing page 3 of 39
Author
Post
Essentials Only Full Version
cdc-951
SSC Member
  • Total Posts : 520
  • Reward points : 0
  • Joined: 2012/04/27 02:26:30
  • Status: offline
  • Ribbons : 1
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/07 10:06:48 (permalink)
Thanks Jacob! I have been wondering about this since launch of the ftw3s
#61
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/07 11:01:24 (permalink)
Can you confirm that the voltage slider is maxed out in PXOC?


#62
Andrew_WOT
iCX Member
  • Total Posts : 321
  • Reward points : 0
  • Joined: 2014/10/08 08:39:20
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/07 20:35:30 (permalink)
Yes, at 100%
#63
Groto
New Member
  • Total Posts : 70
  • Reward points : 0
  • Joined: 2007/01/13 10:37:02
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/12 20:35:13 (permalink)
Yes

Core i7 3770K, Thermalright Silver Arrow SB-E, Asus Z77 Sabertooth Mobo, Silverstone FT-02, 2x8GB Corsair Vengeance LP 1600mhz, EVGA GTX 1080 TI FTW3, Samsung 840 EVO 1TB, Asus Xonar Essence STX, Klipsch RF-7s, RB-75s, Dell U3014, 2x Dell U2410 Monitors, Jamo Cornet Speakers, Corsair AX1200 (PSU), Asus Blu Ray Drive
#64
cdc-951
SSC Member
  • Total Posts : 520
  • Reward points : 0
  • Joined: 2012/04/27 02:26:30
  • Status: offline
  • Ribbons : 1
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/13 11:35:58 (permalink)
EVGA_JacobF
Can you confirm that the voltage slider is maxed out in PXOC?


Can confirm I have my voltage and power maxed out. Still getting 117% Throttled
#65
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/13 17:57:20 (permalink)
I've seen mine hit 118%, 330w. I have the hybrid though. Don't know if that makes a difference.

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#66
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/15 16:49:36 (permalink)
We cannot seem to reproduce this year, try using 3DMark11 or Furmark.
 
 

Attached Image(s)



#67
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/15 17:25:54 (permalink)
EVGA_JacobF
We cannot seem to reproduce this year, try using 3DMark11 or Furmark.
 

 
Mine is bouncing off the power limit in Superposition Benchmark. Just ran the 4K optimized test. Highest power % I saw was 116% and it would still bounce off the limit. Something is not right! Can you use Superposition to test?  

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#68
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/15 17:36:55 (permalink)
Here is a picture from MSI afterburner.
 
 
 
 

Attached Image(s)


i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#69
cdc-951
SSC Member
  • Total Posts : 520
  • Reward points : 0
  • Joined: 2012/04/27 02:26:30
  • Status: offline
  • Ribbons : 1
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/15 18:30:21 (permalink)
Star Wars battlefront, Battlefield and other intensive games are doing this throttling at 1440p 165Hz and 165 Fps. When it hits 117%, it pulls the clock and voltage down. No thermal throttles and running at 65c. Sometimes it is able to go over 117% but throttles aggressively if it does go over to 19xx Mhz range since the power dips
#70
Andrew_WOT
iCX Member
  • Total Posts : 321
  • Reward points : 0
  • Joined: 2014/10/08 08:39:20
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/15 19:34:58 (permalink)
Superposition 4K Optimized



 

Attached Image(s)

#71
kdgamer
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2017/07/27 12:25:20
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/16 05:58:13 (permalink)
Just found this thread.. I'm having the same issue, slave bios allows me to slide the power slider to 127% but it keeps hitting a power limit at at around 117%. I'll keep an eye on this thread.
#72
Valtrius Malleus
iCX Member
  • Total Posts : 290
  • Reward points : 0
  • Joined: 2017/03/16 19:46:33
  • Status: offline
  • Ribbons : 2
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/16 06:12:10 (permalink)
@EVGA_JacobF Most people with this issue report it after they change the BIOS from master to slave. You could try changing it to master from slave and see if your power limit is capped at 117%, if so change it back to slave and see if it can go over 117%.
 
One thing I notice when flashing my BIOS is that the power slider updated correctly, but the power limit was restricted to the old BIOS. If my new power limit on a different BIOS was 350W for example, then it would say my power level reached 108% (from 280W base) but I was still limited to 300W from the FE BIOS because 108% of 280W is 300W. With the FTW3 having the same base power on both BIOSes then it will not change the percentage based on the 100% limit as mine did when flashing, but is still limiting it to the old BIOS power limit.
#73
TheWereCat
New Member
  • Total Posts : 29
  • Reward points : 0
  • Joined: 2017/06/14 08:02:53
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/16 09:24:46 (permalink)
EVGA_JacobF
We cannot seem to reproduce this year, try using 3DMark11 or Furmark.
 
 


I tried Furmark. The card still won't budge above 117% when set to 127% power.
 
Video:
youtube.com/watch?v=CnMsgkrUesk
 
EDIT:
I tried to switch back to Master BIOS with 117% limit. The card boosts properly to 117%.
With Slave BIOS the card still boosts only to 117% even when the slider is at 127%. I get exactly the same clocks as on Master BIOS.
post edited by TheWereCat - 2017/09/16 09:36:03
#74
Sajin
EVGA Forum Moderator
  • Total Posts : 49164
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/16 13:38:41 (permalink)
TheWereCat
EVGA_JacobF
We cannot seem to reproduce this year, try using 3DMark11 or Furmark.
 
 


I tried Furmark. The card still won't budge above 117% when set to 127% power.
 
Video:
youtube.com/watch?v=CnMsgkrUesk
 
EDIT:
I tried to switch back to Master BIOS with 117% limit. The card boosts properly to 117%.
With Slave BIOS the card still boosts only to 117% even when the slider is at 127%. I get exactly the same clocks as on Master BIOS.





See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#75
HeavyHemi
Insert Custom Title Here
  • Total Posts : 15665
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 135
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/16 14:18:57 (permalink)
So, that would appear to mean  the power settings in the slave BIOS are wrong which should be an easy fix by EVGA to adjust in the BIOS....just like we used to do on Maxwell (when we could still modify the BIOS). Perhaps a flawed version of the slave BIOS was flashed? Interestingly, my GPU with 120% power target set (stock BIOS), peaks at 124% while gaming or benching.. it's a mystery
post edited by HeavyHemi - 2017/09/16 14:33:21

EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
 
#76
caseyohrn
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2010/05/28 22:22:47
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/18 12:59:20 (permalink)
Is the VRAM fan supposed to be off on the Master BIOS until it heats up? And I'm not sure if this is because of the card but on the Slave BIOS, DOOM & Titanfall 2 randomly crash directly to desktop without any error screen whatsoever. Haven't had this issue on the Master BIOS. 
#77
Sajin
EVGA Forum Moderator
  • Total Posts : 49164
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/18 13:41:21 (permalink)
genreefer
Is the VRAM fan supposed to be off on the Master BIOS until it heats up?

Yep.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#78
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/19 11:05:38 (permalink)
Any update on this?

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#79
TheWereCat
New Member
  • Total Posts : 29
  • Reward points : 0
  • Joined: 2017/06/14 08:02:53
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/19 11:19:33 (permalink)
Sajin
TheWereCat
EVGA_JacobF
We cannot seem to reproduce this year, try using 3DMark11 or Furmark.
 
 


I tried Furmark. The card still won't budge above 117% when set to 127% power.
 
Video:
youtube.com/watch?v=CnMsgkrUesk
 
EDIT:
I tried to switch back to Master BIOS with 117% limit. The card boosts properly to 117%.
With Slave BIOS the card still boosts only to 117% even when the slider is at 127%. I get exactly the same clocks as on Master BIOS.





what?
#80
Sajin
EVGA Forum Moderator
  • Total Posts : 49164
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/19 14:51:50 (permalink)
TheWereCat
what?

Just saying thumbs down to the results.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#81
vladoski
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2017/09/15 13:53:11
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/19 19:11:01 (permalink)
Seems like I have the same issue on my ftw3. It will not go past 117 on slave bios.
#82
seca77
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2017/07/25 14:34:41
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/20 11:58:28 (permalink)
Same here, GPU-Z shows me that I'm on the right BIOS.
#83
Sajin
EVGA Forum Moderator
  • Total Posts : 49164
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/20 12:06:31 (permalink)
seca77
Same here, GPU-Z shows me that I'm on the right BIOS.


Sorry to hear you're having the same issue.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#84
Sajin
EVGA Forum Moderator
  • Total Posts : 49164
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/20 21:04:30 (permalink) ☼ Best Answerby Sajin 2017/09/20 22:02:35
Did some testing with my 1080 ti kingpin...
 
Normal VBIOS Results:
  •  <= Unigine Superposition @ 8k optimized preset.
  •  <= Furmark
 
OC VBIOS Results:
  •  <= Unigine Superposition @ 8k optimized preset.
  •  <= Furmark
 
Extreme Watercooling OC VBIOS Loaded To LN2 Switch On Kingpin Results:
  •  <= Unigine Superposition @ 8k optimized preset. 
  •  <= Furmark
 
Definitely a vbios issue. The Extreme Watercooling OC VBIOS is provided to all kingpin users here. The Extreme Watercooling OC VBIOS is compatible only with the EVGA GeForce GTX 1080 Ti KINGPIN card, and will not work/may damage any regular 1080 Ti FTW3/SC or any other brand card.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#85
Nervoize
Superclocked Member
  • Total Posts : 211
  • Reward points : 0
  • Joined: 2017/02/03 04:29:59
  • Location: http://localhost/
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/21 17:25:19 (permalink)
My powerlimit is also maxed out, but take a look at my powers:





Intel Core i7 7700k @5.1Ghz 1.376v - MSI Z270 Gaming Carbon PRO - 32GB DDR4 3200MHz Corsair Vengeance PRO RGB

Corsair HX1000 - EVGA GTX 1080Ti FTW3 2000/5505 @ 1v

#86
Sajin
EVGA Forum Moderator
  • Total Posts : 49164
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/21 18:13:45 (permalink)
Nervoize
My powerlimit is also maxed out, but take a look at my powers:


Run Furmark @ 1280x720 with Anti-Aliasing set to OFF in windowed mode. You'll definitely hit the power limit then. 
post edited by Sajin - 2017/09/21 18:17:06


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#87
Miko Ryukudo
Superclocked Member
  • Total Posts : 127
  • Reward points : 0
  • Joined: 2014/10/28 18:06:10
  • Location: United States
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/22 15:51:10 (permalink)
How is everyone getting over the power target of 117? My FTW3 Hybrid slider maxes at 117 on Afterburner and Precision.
 
Updated to latest version of the ocing tools and switched to slave bios. Nothing changes. 

My new rig 
 
Corsair 750D / Intel 4790k /  Noctua NH-D15 / ASUS Z97-A / G.SKill Ares 16GB (8GB x 2) DDR3 2400  / SanDisk Extreme Pro 480GB SSD / EVGA GTX 980 SC ACX 2.0 1506mhz / Corsair HX850 PSU / Windows 10 Pro 64-bit 
 
#88
vladoski
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2017/09/15 13:53:11
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/22 15:56:29 (permalink)
Miko Ryukudo
How is everyone getting over the power target of 117? My FTW3 Hybrid slider maxes at 117 on Afterburner and Precision.
 
Updated to latest version of the ocing tools and switched to slave bios. Nothing changes. 




I followed Sajin's instruction. I can't post the url so I'll just copy paste the instruction.
 
You may need to do the following to get everything working right...
 
#1 Uninstall precision xoc.
#2 Shutdown pc.
#3 Unplug pc from wall.
#4 Hold case power on button for 30 seconds.
#5 Plug pc back into wall.
#6 Turn on system, install precision xoc, reboot pc.
 
Should be good then.
 
#89
Nervoize
Superclocked Member
  • Total Posts : 211
  • Reward points : 0
  • Joined: 2017/02/03 04:29:59
  • Location: http://localhost/
  • Status: offline
  • Ribbons : 0
Re: 1080 TI FTW3 watercooled Slave BIOS doesn't go over 117% 2017/09/22 16:27:12 (permalink)
Sajin
Nervoize
My powerlimit is also maxed out, but take a look at my powers:


Run Furmark @ 1280x720 with Anti-Aliasing set to OFF in windowed mode. You'll definitely hit the power limit then. 




I've done that. No positive result.


Intel Core i7 7700k @5.1Ghz 1.376v - MSI Z270 Gaming Carbon PRO - 32GB DDR4 3200MHz Corsair Vengeance PRO RGB

Corsair HX1000 - EVGA GTX 1080Ti FTW3 2000/5505 @ 1v

#90
Page: < 12345.. > >> Showing page 3 of 39
Jump to:
  • Back to Mobile