EVGA

EVGA Z370 micro atx

Author
Post
Essentials Only Full Version
jnhilton
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2018/10/14 14:42:55
  • Status: offline
  • Ribbons : 0
2020/07/09 10:50:01 (permalink)
Haven't built a computer in awhile.
Will Intel 9900k work with Z370.
Will DDR4 3600 ALSO WORK WITH THIS BUILD.
THANKS FOR ANY ADVICE.
#1

5 Replies Related Threads
    Delirious
    EVGA Forum Moderator
    • Total Posts : 17475
    • Reward points : 0
    • Joined: 2007/11/15 13:34:04
    • Location: at my computer
    • Status: offline
    • Ribbons : 61
    Re: EVGA Z370 micro atx 2020/07/09 10:56:51 (permalink)
     
     
    ddr 3600 will work but it's based upon how good the memory controller is on the CPU.   YMMV
     
    regarding the 9900K   9th gens will run on the z370 platform but will need a bios update to support it.  I'd call tech support as I don't see any mention of this for this motherboard on the release noted for the most current bios.  Be aware that the motherboard may not come with the latest bios.  you will need to flash it if it does support it and will need a donor CPU. 

    "Be quick to listen, slow to speak and slow to anger" 
    Affiliate Code XZUMV9TJW5
    Associate Code: 7PM43CU71IB2IAP
    education may be expensive but wait until you get the bill for ignorance
    A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
    #2
    jnhilton
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2018/10/14 14:42:55
    • Status: offline
    • Ribbons : 0
    Re: EVGA Z370 micro atx 2020/07/09 11:11:20 (permalink)
    From what I'm gathering the CPU will work with Z370,but will likely need the most recent Bios.
    The CPU runs at 3.6ghz.
    But will the Ram also be able to run at the same speed.
    Or should I just save $40 and go with DDR4 3200?
    Haven't built since the P35 Days.
    #3
    Delirious
    EVGA Forum Moderator
    • Total Posts : 17475
    • Reward points : 0
    • Joined: 2007/11/15 13:34:04
    • Location: at my computer
    • Status: offline
    • Ribbons : 61
    Re: EVGA Z370 micro atx 2020/07/09 11:39:34 (permalink)
    ddr4 with tighter timings will work just as good.   at 3200.  you can alway downclock the memory and set tighter timings on the 3600
     

    "Be quick to listen, slow to speak and slow to anger" 
    Affiliate Code XZUMV9TJW5
    Associate Code: 7PM43CU71IB2IAP
    education may be expensive but wait until you get the bill for ignorance
    A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
    #4
    batboy88
    Superclocked Member
    • Total Posts : 234
    • Reward points : 0
    • Joined: 2018/03/07 16:01:58
    • Status: offline
    • Ribbons : 0
    Re: EVGA Z370 micro atx 2020/07/09 16:12:32 (permalink)
    Oh that's still good man...over here jerrying a strip again damn 334 across the switch lol. and yeah all good idk rng/Llc wants to be higher..might be the kit idk.

    7700k/5.2ghz-1.34v/ FTW K/ custom Loop/ Crucial/Micron Ballistix- 3200mhz/ Vega 56 Reference/ Cooler Master GXII Pro 750w
     
    2600x/MSI X470 4.3ghz
    #5
    Delirious
    EVGA Forum Moderator
    • Total Posts : 17475
    • Reward points : 0
    • Joined: 2007/11/15 13:34:04
    • Location: at my computer
    • Status: offline
    • Ribbons : 61
    Re: EVGA Z370 micro atx 2020/07/09 16:39:26 (permalink)
    batboy88
    Oh that's still good man...over here jerrying a strip again damn 334 across the switch lol. and yeah all good idk rng/Llc wants to be higher..might be the kit idk.


      what did I miss?

    "Be quick to listen, slow to speak and slow to anger" 
    Affiliate Code XZUMV9TJW5
    Associate Code: 7PM43CU71IB2IAP
    education may be expensive but wait until you get the bill for ignorance
    A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
    #6
    Jump to:
  • Back to Mobile