Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
In that same vein, intel sells so many CPUs to non-enthusiasts that it doesn't make much sense to put out the effort to neuter them just so we can't overclock them.
|
Cyras
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2012/02/06 04:41:01
- Status: offline
- Ribbons : 0
The "CPU Strap" Profiles are locked, but you can help us, to show us why!
Please download HwInfo32 v3.92, Build 1520 (Added support of Intel Integrated Clock Control (ICC): reporting of clock capabilities and monitoring of actual status.) AND show us the ICC Profiles from your E5 ES Sample.
Mainboard -> Intel ME -> Intel ICC (Intel HECI/ME Driver must be installed)
|
rhussain
FTW Member
- Total Posts : 1679
- Reward points : 0
- Joined: 2009/07/17 06:58:49
- Location: Infinite Loop
- Status: offline
- Ribbons : 7
I like this board a lot but when will there be news about a possible release date?
|
debs3759
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2011/12/14 17:58:35
- Status: offline
- Ribbons : 0
slash-2cpu
Cyras 
That 6-core CPU-Z shot is an Engineering Sample i7 3960X. Multipliers, cache sizes, core count all match the 3960X. It could also be an E5-1660, which is not a 2-way capable part. Check the codename. It's a Sandy Bridge-EP/EX, which means it has to be either an E5-1660 or an E5-2600 that hasn't been announced :)
Asus Maximus IV Gene-Z i7-2700K @ 5 GHz (water cooled) 8 GB Kingston HyperX @ 2133 GTX 570 SC (975/1950/2400 @ 1.1V fully stable and folding) 1000W CoolerMaster Silent Pro Gold (single 12V rail) 2 * OCZ Vertex3 in RAID 0
|
Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
More than likely, that's an E5-1660.
|
fugatron78
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2006/11/10 13:15:35
- Status: offline
- Ribbons : 0
Re:eVGA SR-X (SR-3)
2012/02/10 06:56:02
(permalink)
|
Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
Re:eVGA SR-X (SR-3)
2012/02/10 12:20:43
(permalink)
|
HDTVdevil
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2010/02/06 05:04:44
- Status: offline
- Ribbons : 0
Re:eVGA SR-X (SR-3)
2012/02/12 02:44:18
(permalink)
I have these available for use in a new system: G.Skill RipjawsZ F3-10666CL9Q2-64GBZL (8Gx8) any chance they would be supported? H.D
post edited by HDTVdevil - 2012/02/13 08:32:39
|
Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
Re:eVGA SR-X (SR-3)
2012/02/13 13:17:24
(permalink)
|
linuxguy
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2010/05/27 07:23:58
- Status: offline
- Ribbons : 0
Re:eVGA SR-X (SR-3)
2012/02/13 13:48:30
(permalink)
Nice looking board. It looks a lot more modern than the SR-2
|
gatecrasher
iCX Member
- Total Posts : 267
- Reward points : 0
- Joined: 2007/12/20 08:55:58
- Status: offline
- Ribbons : 1
Re:eVGA SR-X (SR-3)
2012/02/13 14:00:33
(permalink)
Hot diggity darn, that is what I will be getting
Asus Rampage V Extreme Intel i7 5960X Avexir 16gb ram EVGA Titan X 1 x Corsair Neutron GTX 120 Asus Xonar Xense 2 x 150 gig WD Velociraptors Lian Li PcP80 Armoursuit Platimax 1500 Full custom h20 cooled
|
lehpron
Regular Guy
- Total Posts : 8858
- Reward points : 0
- Joined: 2006/05/18 15:22:06
- Status: offline
- Ribbons : 191
debs3759
Check the codename. It's a Sandy Bridge-EP/EX, which means it has to be either an E5-1660 or an E5-2600 that hasn't been announced :) The i7-3800 and i7-3900 have the same -EP/-EX subcodename because they use the LGA2011 socket. The only other subcodename is -EN, but that's for LGA1356.
|
pyrebuilder
SSC Member
- Total Posts : 544
- Reward points : 0
- Joined: 2010/03/06 14:02:36
- Location: South Lake Tahoe, CA
- Status: offline
- Ribbons : 5
the only thing i wish they had was the 90 degree power connector
Computer builder, rocket flier, D&D player. EVGA SR-X, 2x Xeon E5-2687W 64 GB ECC RAM 1600Mhz
|
trevormacro
New Member
- Total Posts : 46
- Reward points : 0
- Joined: 2012/02/01 09:04:19
- Status: offline
- Ribbons : 0
|
lollygag
iCX Member
- Total Posts : 344
- Reward points : 0
- Joined: 2011/06/10 02:30:10
- Location: Maui
- Status: offline
- Ribbons : 1
pyrebuilder
the only thing i wish they had was the 90 degree power connector
Normally I'd say that would be bad for a board this size that already is challenging to fit in a case.. but it has the SAS connectors right angled anyways.
|
Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
I have never seen vertical SAS connectors unless they are attached to a vertical PCB. The cable coming out of the SAS port is more flexible than the garden hose that is the 24 pin loom.
|
Gratuitous
FTW Member
- Total Posts : 1109
- Reward points : 0
- Joined: 2011/03/16 04:30:23
- Location: California
- Status: offline
- Ribbons : 4
pyrebuilder
the only thing i wish they had was the 90 degree power connector
yah, I am sure because of the width of this board they decided to keep vertical to save that inch or so. might make a big diferance for some cases to fit or not.
“I built a castle in the swamp and it sunk. I built a second castle and it sunk too. I built a third castle and it burned down and then sunk. But the fourth castle, Ahhhh! That one stood.” —Monty Python and the Holy Grail
|
chillernr1
SSC Member
- Total Posts : 519
- Reward points : 0
- Joined: 2007/01/17 07:49:04
- Status: offline
- Ribbons : 6
Re:eVGA SR-X (SR-3)
2012/02/14 11:58:46
(permalink)
matt.hobson
Nice looking board. It looks a lot more modern than the SR-2
because it's newer maybe ? :p
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
lollygag
pyrebuilder
the only thing i wish they had was the 90 degree power connector
Normally I'd say that would be bad for a board this size that already is challenging to fit in a case.. but it has the SAS connectors right angled anyways.
Yup, but using the SAS connectors are optional in a way... 24pin is mandatory. Plus the SAS connectors are a bit more flexible. Right angled 24pin would extend the PCB about 1-2 more inches out.
|
pyrebuilder
SSC Member
- Total Posts : 544
- Reward points : 0
- Joined: 2010/03/06 14:02:36
- Location: South Lake Tahoe, CA
- Status: offline
- Ribbons : 5
EVGA_JacobF
lollygag
pyrebuilder
the only thing i wish they had was the 90 degree power connector
Normally I'd say that would be bad for a board this size that already is challenging to fit in a case.. but it has the SAS connectors right angled anyways.
Yup, but using the SAS connectors are optional in a way... 24pin is mandatory. Plus the SAS connectors are a bit more flexible. Right angled 24pin would extend the PCB about 1-2 more inches out.
makes sense
Computer builder, rocket flier, D&D player. EVGA SR-X, 2x Xeon E5-2687W 64 GB ECC RAM 1600Mhz
|
Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
|
linuxguy
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2010/05/27 07:23:58
- Status: offline
- Ribbons : 0
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:eVGA SR-X (SR-3)
2012/02/25 11:13:38
(permalink)
My Affiliate Code: GL1IAAFWJF
|
pazza3169
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2011/10/21 06:15:02
- Status: offline
- Ribbons : 0
Re:eVGA SR-X (SR-3)
2012/02/26 03:12:52
(permalink)
If you check XS news section you will find the ASUS board has many overclocking features within the bios. Including multiplier and BLK strap adjustment. But NO cpu so far supports them!!! This link explains abit more: http://vr-zone.com/articles/asus-z9p...ard/14894.html
ASUS R4E 0901 Intel 3690x 5.125ghz 24/7, EVGA GTX580 Tri SLI 950mhz Core, 2400 mem 24/7 32GB GSkill Ripjawz 2333mhz cas 10, 16gb 2400mhz+ Cas 10 OCZ 2 x 60GB Agility Raid 0, OS Corsair 2 x 120gb GT Raid 0, Programme Files. 1TB Western Digital, Storage Silverstone 1500watt PSU All on water!! Win 7 64 Bit ultimate. ONLY THE STRONG SURVIVE!!!!!!!!!!!!!!
|
Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
Re:eVGA SR-X (SR-3)
2012/02/26 11:28:00
(permalink)
We're like a week and a half away from the launch of the CPUs. Everybody, please keep your pants on until the afterparty.
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:eVGA SR-X (SR-3)
2012/02/27 05:39:09
(permalink)
I have this information for you all: I have contacted the distributor of the item and they have advised me that this item is currently available. They also added:
"They are boxed processors and the description for it is 2.30GHZ E5-2620 XEON PROCESSOR 6 CORE"
I am afraid this is all the information we were provided with ourselves.
I hope this helps!
Kind regards,
Lambda-Tek Sales Team So maybe the E5-2620 is indeed a 2.30Ghz chip & the release specs we have seen so far are wrong? (E.g. not 2.0Ghz for the E5-2620).
post edited by Sleinous - 2012/02/27 12:10:53
My Affiliate Code: GL1IAAFWJF
|
beaker7
Superclocked Member
- Total Posts : 112
- Reward points : 0
- Joined: 2011/03/20 21:18:55
- Status: offline
- Ribbons : 0
Re:eVGA SR-X (SR-3)
2012/02/27 11:44:03
(permalink)
Brocasta
We're like a week and a half away from the launch of the CPUs. Everybody, please keep your pants on until the afterparty.
You guys are wearing pants?
System 1: Supermicro X9DRG-QF | 2x E5-2690v2 | 256 GB Crucial 1866Mhz ECC | 2x iofx 1.65 TB | LSI 9361-8i + 8x Seagate ST2000NM0043 | Samsung 840 Pro | 3x Quadro K6000 | Red Rocket-X | Corsair AX1200i System 2: Mac Pro 2013 | E5-2690v2 | 64 GB | D700 | 1TB flash System 3: Asus Z9PE-D8-WS | 2x E5-2687W v2 | 128 GB | 4x EVGA TITAN BLACK
|
Brocasta
SSC Member
- Total Posts : 599
- Reward points : 0
- Joined: 2011/02/10 22:09:49
- Status: offline
- Ribbons : 1
Re:eVGA SR-X (SR-3)
2012/02/27 12:17:58
(permalink)
beaker7
Brocasta
We're like a week and a half away from the launch of the CPUs. Everybody, please keep your pants on until the afterparty.
You guys are wearing pants?
I'm wearing those break-away pants that chippendale dancers wear. 
|
Gratuitous
FTW Member
- Total Posts : 1109
- Reward points : 0
- Joined: 2011/03/16 04:30:23
- Location: California
- Status: offline
- Ribbons : 4
Re:eVGA SR-X (SR-3)
2012/02/27 12:22:35
(permalink)
Brocasta
beaker7
Brocasta
We're like a week and a half away from the launch of the CPUs. Everybody, please keep your pants on until the afterparty.
You guys are wearing pants?
I'm wearing those break-away pants that chippendale dancers wear.
wow this is to much information! I am sure glad you guys don't have live webcams! (typing this while sitting in boxers before getting ready for work) lol
“I built a castle in the swamp and it sunk. I built a second castle and it sunk too. I built a third castle and it burned down and then sunk. But the fourth castle, Ahhhh! That one stood.” —Monty Python and the Holy Grail
|
lollygag
iCX Member
- Total Posts : 344
- Reward points : 0
- Joined: 2011/06/10 02:30:10
- Location: Maui
- Status: offline
- Ribbons : 1
Re:eVGA SR-X (SR-3)
2012/02/27 12:39:06
(permalink)
Im picturing the release date coming, Brocasta's pants flying off as he starts into the gyro grind..
|