EVGA

Hot!What software do you use with the Hybrid coolers?

Author
vxpulse
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/10/17 16:21:31
  • Status: offline
  • Ribbons : 0
2019/09/26 11:09:32 (permalink)
Precision X1 doesn't show the fans for my 2080ti Hybrid, is there different software I'm supposed to be using with the hybrid kits or is there something wrong?
#1

9 Replies Related Threads

    EVGATech_JoseR
    EVGA Tech Support
    • Total Posts : 824
    • Reward points : 0
    • Joined: 2014/04/11 09:39:05
    • Status: offline
    • Ribbons : 1
    Re: What software do you use with the Hybrid coolers? 2019/10/02 06:19:25 (permalink)
    What version of PX1 are you on (latest version is 1.0.0.0.)?
     
    Does the software register the card correctly?
     
     
     
     

    Rate and comment my level of service 
     
    https://www.evga.com/myevga/rateus/
     
     
    #2
    vxpulse
    New Member
    • Total Posts : 35
    • Reward points : 0
    • Joined: 2007/10/17 16:21:31
    • Status: offline
    • Ribbons : 0
    Re: What software do you use with the Hybrid coolers? 2019/10/02 08:31:10 (permalink)
    I'm using EVGA Precision X1 Version 1.0.0.0, and the software is showing 2080ti up at the top.
     
    post edited by vxpulse - 2019/10/02 12:33:40

    Attached Image(s)

    #3
    vxpulse
    New Member
    • Total Posts : 35
    • Reward points : 0
    • Joined: 2007/10/17 16:21:31
    • Status: offline
    • Ribbons : 0
    Re: What software do you use with the Hybrid coolers? 2019/10/14 11:22:57 (permalink)
    Been a while with no response. Just to reiterate, I installed the evga hybrid kit on my 2080ti. It only shows one fan, but the kit has two. One fan mounted on the card, and the other fan is on the radiator. Precision X1 is only showing one fan.
    #4
    tattude69
    Superclocked Member
    • Total Posts : 205
    • Reward points : 0
    • Joined: 2013/04/21 15:30:52
    • Location: NY
    • Status: offline
    • Ribbons : 0
    Re: What software do you use with the Hybrid coolers? 2019/10/22 18:03:53 (permalink)
    your screenshot shows both fans at 46% fan1 and fan2 on the right but no speed on left if the fan is working maybe its the rpm signal wire damaged.verify both fans are plugged in and working if yes try reinstalling the precision x software, if still no luck, see if msi afterburner reads it? 
    post edited by tattude69 - 2019/10/22 18:17:21

    I7 4790K 4.7G
    Corsair CLC H100i
    Gigabyte Z97 Gaming 7 Motherboard
    Evga GTX 1080 Classified
    Crucial DDR3 1600 MHZ 32Gb
    Evga Supernova 650 watt power supply
    Coolermaster MasterCase Pro5
    Samsung SSD Windows 10 Pro😎

     
     
    #5
    vxpulse
    New Member
    • Total Posts : 35
    • Reward points : 0
    • Joined: 2007/10/17 16:21:31
    • Status: offline
    • Ribbons : 0
    Re: What software do you use with the Hybrid coolers? 2019/10/22 21:31:45 (permalink)
    tattude69
    your screenshot shows both fans at 46% fan1 and fan2 on the right but no speed on left if the fan is working maybe its the rpm signal wire damaged.verify both fans are plugged in and working if yes try reinstalling the precision x software, if still no luck, see if msi afterburner reads it? 


    At 0 rpm?
    #6
    tattude69
    Superclocked Member
    • Total Posts : 205
    • Reward points : 0
    • Joined: 2013/04/21 15:30:52
    • Location: NY
    • Status: offline
    • Ribbons : 0
    Re: What software do you use with the Hybrid coolers? 2019/10/23 12:36:17 (permalink)
    are the fans physically turning?

    I7 4790K 4.7G
    Corsair CLC H100i
    Gigabyte Z97 Gaming 7 Motherboard
    Evga GTX 1080 Classified
    Crucial DDR3 1600 MHZ 32Gb
    Evga Supernova 650 watt power supply
    Coolermaster MasterCase Pro5
    Samsung SSD Windows 10 Pro😎

     
     
    #7
    vxpulse
    New Member
    • Total Posts : 35
    • Reward points : 0
    • Joined: 2007/10/17 16:21:31
    • Status: offline
    • Ribbons : 0
    Re: What software do you use with the Hybrid coolers? 2019/11/05 15:09:30 (permalink)
    tattude69
    are the fans physically turning?


    Yeah, but I can't even verify if they're spinning at 46% with no RPM to reference. It should be reporting the RPM.
    #8
    kevinc313
    SSC Member
    • Total Posts : 562
    • Reward points : 0
    • Joined: 2019/02/28 09:27:55
    • Status: offline
    • Ribbons : 5
    Re: What software do you use with the Hybrid coolers? 2019/11/05 15:39:43 (permalink)
    Try HWMonitor or HWInfo64, one of the two should report the rad fan RPM.  If you hit the blue "Auto" icon on the lower right that should iirc unlink the fan speed control and let you control the fan speeds independently, it should also then show the rad fan speed under the second fan readout.  Right now you are controlling under a single percentage fan speed and you only get one speed readout.
     
    I think....ymmv.  It's been a few months since I installed the hybrid kit and I'm running the pump and rad fans off the MB based on system temp, but I did briefly try the stock fan control.
    #9
    StBean
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2017/04/04 15:09:45
    • Status: offline
    • Ribbons : 0
    Re: What software do you use with the Hybrid coolers? 2019/11/18 18:37:42 (permalink)
    I'm still using MSI Afterburner for my EVGA Hybrid RTX 2080Ti. I have not tried out the EVGA software out for awhile but the Afterburner software does what I want it to just fine, which is monitoring the
    temperatures and controlling the fan speeds manually and making custom fan speed control profiles. Not sure which one is better for overclocking, but I would assume EVGA should be better for EVGA cards but I remember in 
    the past when I was into overclocking their software did not work quite as well as MSI's Afterburner.


    #10
    Jump to:
  • Back to Mobile