turina3
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2016/07/28 09:00:36
- Location: Europe
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/08/31 18:20:55
(permalink)
Well, I think if in this site I can find the two vbios versions from my graphic card, is because you can choose what version use, and if not, why you can find differents versions of vbios in this site? What would be the meaning if it is not for downloading?
Mother board: Asus H170-Pro, Cpu: i5 6600, Cooler CPU: Bequiet Dark Rock 3 Hdd 1: SSD SAMSUNG evo 850 1 Tb, Hdd 2: Western Digital 1TB , Hdd 3: Toshiba 1 TB, Frontal: Lian Li BZ-H06B, RAM: Kingston DDR4 2x8 Gb 2133 Mhz, Graphic card: EVGA Gtx 1080 8gb SC GDDR5X ACX 3.0 PSU: Be Quiet! Straight Power 10 700W 80 Plus Gold, Tower: Be quiet! Silent Base 600 BG007, Dvd: ASUS DRW-24F1MT
|
Maxy71
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2014/07/04 15:25:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/09/06 16:11:11
(permalink)
good morning my 1080 FTW and liquid need to update the bios? from what I understand corrects only the fan curve .. thank you
post edited by Maxy71 - 2017/09/06 23:49:16
Case:Phanteks Enthoo Elite/ Mobo: Rampage VI Extreme Encore / CPU: i9 10900X / Liquido: Waterblock/Raccordi/Bistpower / Radiatori: 2-480 + 2-360 Black Ice / Ram: Corsair Dominator Platinum RGB 64 GB 4000 Mhz/ VGA: EVGA GTX 1080 FTW / Monitor: Rog Swift PG278Q / Samsung NVME 970 Pro x2 / SO: Win10 Pro x2 / Storage: 2x SSD 860 Pro / Alim: Cosrsair AX1600i
|
turina3
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2016/07/28 09:00:36
- Location: Europe
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/09/08 15:04:56
(permalink)
Yes, you understand correctly, only the fan curve, so, I think it is not necesary if you make your own manual fan curve
Mother board: Asus H170-Pro, Cpu: i5 6600, Cooler CPU: Bequiet Dark Rock 3 Hdd 1: SSD SAMSUNG evo 850 1 Tb, Hdd 2: Western Digital 1TB , Hdd 3: Toshiba 1 TB, Frontal: Lian Li BZ-H06B, RAM: Kingston DDR4 2x8 Gb 2133 Mhz, Graphic card: EVGA Gtx 1080 8gb SC GDDR5X ACX 3.0 PSU: Be Quiet! Straight Power 10 700W 80 Plus Gold, Tower: Be quiet! Silent Base 600 BG007, Dvd: ASUS DRW-24F1MT
|
Maxy71
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2014/07/04 15:25:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/09/09 00:07:28
(permalink)
turina3
Yes, you understand correctly, only the fan curve, so, I think it is not necesary if you make your own manual fan curve
Thank you very much, very kind.
Case:Phanteks Enthoo Elite/ Mobo: Rampage VI Extreme Encore / CPU: i9 10900X / Liquido: Waterblock/Raccordi/Bistpower / Radiatori: 2-480 + 2-360 Black Ice / Ram: Corsair Dominator Platinum RGB 64 GB 4000 Mhz/ VGA: EVGA GTX 1080 FTW / Monitor: Rog Swift PG278Q / Samsung NVME 970 Pro x2 / SO: Win10 Pro x2 / Storage: 2x SSD 860 Pro / Alim: Cosrsair AX1600i
|
gamingfun
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2017/11/02 06:06:34
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/11/02 06:09:21
(permalink)
Good morning. I just bought an evga ftw gtx 1080 from a friend.
I would like to know what is the old bios version and what is the new one to know if I should update my graphic or not.
Thank you
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21174
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/11/02 18:18:11
(permalink)
gamingfun
Good morning. I just bought an evga ftw gtx 1080 from a friend.
I would like to know what is the old bios version and what is the new one to know if I should update my graphic or not.
Thank you
Did you read the first post? You should be able to find your answer there. Hint: BIOS version numbers are written in the links and there is a link to a thermal mod page which has a search tool where you can type the card's serial number to view its thermal mod status.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
wwr222
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2016/10/04 14:13:04
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/12/31 06:11:07
(permalink)
I greet all the employees of the company Evga with the New Year. To all the world, health, successes in life
|
turina3
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2016/07/28 09:00:36
- Location: Europe
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2017/12/31 17:50:24
(permalink)
wwr222
I greet all the employees of the company Evga with the New Year. To all the world, health, successes in life
Health and Joy! 
Mother board: Asus H170-Pro, Cpu: i5 6600, Cooler CPU: Bequiet Dark Rock 3 Hdd 1: SSD SAMSUNG evo 850 1 Tb, Hdd 2: Western Digital 1TB , Hdd 3: Toshiba 1 TB, Frontal: Lian Li BZ-H06B, RAM: Kingston DDR4 2x8 Gb 2133 Mhz, Graphic card: EVGA Gtx 1080 8gb SC GDDR5X ACX 3.0 PSU: Be Quiet! Straight Power 10 700W 80 Plus Gold, Tower: Be quiet! Silent Base 600 BG007, Dvd: ASUS DRW-24F1MT
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/08 16:44:47
(permalink)
Thank you for this!!! I was going crazy trying to adjust the fan curve of my GTX 1060 SC 3GB because it was idling at 49~52 degrees Celsius, and found out about this new vbios. Upgraded it and now it makes the fan run @ ~150 RPM on idle which is cooling it gradually :) Edit: It just stopped now in Idle @ 48 Degrees. Edit2: Weird that the card didn't have this update, i bought it on November 2017... x_x
post edited by damekko - 2018/02/08 16:47:56
|
Keyko
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2017/12/06 15:07:18
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/09 10:47:28
(permalink)
Updated fan curve for 1080 FTW2 11Gbps please.
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 09:20:32
(permalink)
HELP!!!!
I've updated the firmware of my card to one that EVGA support sent me on a Ticket, and now when i restarted it, the screen goes black!!!
The Firmware stated that it will have the fan always on for lower temps, but now it has just killed it.
I have a EVGA GTX 1060 SC 3GB
I already opened a support ticket but haven't received a response yet!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 12:31:58
(permalink)
damekko
HELP!!!!
I've updated the firmware of my card to one that EVGA support sent me on a Ticket, and now when i restarted it, the screen goes black!!!
The Firmware stated that it will have the fan always on for lower temps, but now it has just killed it.
I have a EVGA GTX 1060 SC 3GB
I already opened a support ticket but haven't received a response yet!
Try reflashing the card using a spare gpu. Using the cpu's igpu to reflash would work as well.
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:09:37
(permalink)
Thanks for the recommendation, but it didn't work... when the GPU is installed on the motherboard the pc it turns on, but doesn't show anything on screen, doesn't even display the MSI bios screen, neither boot into windows. I've disconnected the GPU from the MB and connected the HDMI to the integrated port and it boots up the OS correctly, so i think the issue is with the GPU (the firmware installed 6162K270.rom), despite the fact that it does turn on and the fan ramps up when first started just doesn't show anything on screen. I've already contacted live support and they initiated an RMA process i'm hoping it gets approved because GPU failed immediately after the firmware was updated. Sajin
damekko
HELP!!!!
I've updated the firmware of my card to one that EVGA support sent me on a Ticket, and now when i restarted it, the screen goes black!!!
The Firmware stated that it will have the fan always on for lower temps, but now it has just killed it.
I have a EVGA GTX 1060 SC 3GB
I already opened a support ticket but haven't received a response yet!
Try reflashing the card using a spare gpu. Using the cpu's igpu to reflash would work as well.
post edited by damekko - 2018/02/22 13:20:51
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:19:52
(permalink)
damekko
Thanks for the recommendation, but it didn't work... when the GPU is installed on the motherboard the pc it turns on, but doesn't show anything on screen, doesn't even display the MSI bios screen, neither boot into windows.
With the gpu completely removed from the system go into the motherboard bios using the igpu, and make sure the igpu is setup to have display priority over pci-e. Shutdown the system and install the gpu. Leave monitor cable connected to the igpu. Boot the system, and you should be able to access windows & reflash the card.
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:23:18
(permalink)
Good Idea! Thank you! i didn't think of that. I will try it in ~1 hour (currently on my lunch time) and report back. Regards. Sajin
damekko
Thanks for the recommendation, but it didn't work... when the GPU is installed on the motherboard the pc it turns on, but doesn't show anything on screen, doesn't even display the MSI bios screen, neither boot into windows.
With the gpu completely removed from the system go into the motherboard bios using the igpu, and make sure the igpu is setup to have display priority over pci-e. Shutdown the system and install the gpu. Leave monitor cable connected to the igpu. Boot the system, and you should be able to access windows & reflash the card.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:30:57
(permalink)
No problem. This is your card correct?
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:35:18
(permalink)
Sajin
No problem. is your card correct?
Yes, that is correct.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:39:19
(permalink)
On the back of the card does it list the original vbios version? If yes, please tell it to me. Should look something like this... 86.06.11.00.62
If the reflash fails I'll try and help you restore the original vbios, but I'll need to know the original vbios version to help you with reflashing the original vbios.
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:49:13
(permalink)
The bios sticker on the GPU reads: 86.06.59.00.60
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 13:53:45
(permalink)
Ok, thanks. Let me know if the reflash fails to correct the problem or not. Or you could try using this file to restore the original vbios right away.
post edited by Sajin - 2018/02/22 13:58:29
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 14:20:49
(permalink)
Right now with the GPU installed IGP preferred on BIOS and HDMI cable on the MB boots to the bios, but after that in hangs and doesnt go into windows.... dunno if the drivers are causing some kind of conflict??
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 14:26:03
(permalink)
Defintely isn't a driver issue if windows isn't getting loaded.
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 14:28:55
(permalink)
It loads no problem without the GPU connected,
When the GPU is connected it loads the repairing menu... but after repairing and going to normal windows screen goes black
Something is happening to windows when the GPU Is installed...
I’m gonna try ti run a recovery or get a windows live USB
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 14:37:22
(permalink)
damekko
but after repairing and going to normal windows screen goes black
Sounds like a driver issue now. I'd make sure the nvidia drivers are uninstalled.
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 14:40:45
(permalink)
I took the long and more secure route...
Had an ssd lying around, and now i’m installing a new windows there, it has finished and restarting right now, i’ll let you know how it goes.
Thank you
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 14:50:20
(permalink)
Ok, flashing successful, lets see how that goes when i switch to Discrete Graphics...
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 15:55:40
(permalink)
damekko
Ok, flashing successful, lets see how that goes when i switch to Discrete Graphics...
Hope the card is working now.
|
damekko
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/02/08 16:22:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 17:18:24
(permalink)
Hi again sorry, had to let that a couple of minutes because of work.
Yes!! The pc finally is running like it should again, i will be doing some tests before calling the GPU as being good; because i did a benchmark really quick with furmark and is running hotter than before using some profiles :-/ so i dont know if it suffered damage internally,
Thank you very much for all your help!!! :D
Will report back!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2018/02/22 17:23:49
(permalink)
No problem. I doubt the card is damaged. The gpu die itself can take up to 96-98c at which point it will shut itself down to prevent damage.
post edited by Sajin - 2018/02/22 17:35:42
|
joaqkin
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2017/01/10 09:31:51
- Status: offline
- Ribbons : 0
Re: Update 11/9/16 with NEW BIOS - EVGA GeForce GTX 1080/1070/1060 PWM Temperature Update
2018/04/25 09:24:03
(permalink)
hello, im new here, so I want to update my bios to the current one but in the list is not my card model can you send me, or say where can I download it?
EVGA GeForce GTX 1060 FTW GAMING, 03G-P4-6168-KR, 3GB GDDR5, ACX
3.0 & LED
|