seahawkgfx
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2007/12/07 08:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 09:17:45
(permalink)
I saved it with GPU Z before the update and then manually used NVflash
post edited by seahawkgfx - 2016/11/10 09:19:58
|
gahelm
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2015/04/17 13:26:34
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 09:22:58
(permalink)
seahawkgfx
I saved it with GPU Z before the update and then manually used NVflash
Crap! I never noticed that GPU-Z would allow me to do that or I would have... Too late now, I'll work with EVGA to correct.
|
emsir
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2016/09/02 01:40:37
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 09:45:14
(permalink)
Gawg36
emsir
Gawg36
Omarlink
The status of thermal pads change, now says "pending shipment" but whats means? 1. The ship its coming 2. The ship is taking more time.
Well I am not holding my breath. I ordered on Oct 25, and last time I checked it said, "awaiting shipment." Or very similar. I ended up finding the measurements of all pads inc. thickness of course and have bought my own.
I think EVGA have received a deluge of requests, so I guess that statement means, "Not shipped yet, and no idea when we will." Could be waiting aloooooonnngggg time.
Good luck getting them this month for what it's worth. 
Could you please post the measurements of all the pads?
Yeah. For the original 2 places, (Back plate, and above VRMs The back plate one is 2mm, the thin one above the VRMs in 1mm. But this is for the FTW which I have. The thickness is a bit different for non FTW. But, I know this thread is long, but the thickness of for all cards pads, of the first two fixes are posted several times in this thread. I recommend you check for yourself for piece of mind, and if your card is not FTW you will need to because I can't remember that. (doesn't apply to me.)
About the recent additional pads, the ones which are stuck or put onto the VRAMS themselves this is pretty new. I haven't seen definitive measurements from EVGA (I may have missed it, but I think not.)
Several people have measured and the consensus for the vrams is 1.5mm to be safe. 1 mm would probably be fine and each card will have tiny differences so I have ordered 1.5mm for the VRAMS. If it's tight, I don't see it as a problem. They will be compressed and at max they would only be a fraction of a mm to thick. Best thing is to read through here and decide about VRAM pads yourself, I am only expressing an opinion.
But, the measurements for the other two are clear and easy to find in this massive thread.
Just for the heck of it I list what I am doing. (FTW only). Large one backplate 2mm. Thin one above VRMS/mosfets 1mm. The VRAMS themselves are below that and it's a new finding so I am going with 1.5mm for them. I have spare 1mm in case it is too thick, but several people have already done the new VRAM mod and they all used 1.5mm from reading most of the posts on this massive thread.
Don't take my word for it though. I know I am right about the first two (one thick pad and one thin one) Not 100% about the new issue of VRAMS, and I am only referring to the FTW. Obvious but worth saying - the original thermal pad kit contained pads for two places. The new ones (starting a day or two ago?) are for another place. So, doing everything will require a BIOS update, and application of thermal pads on three seperate places, not the original two. Does that help?
GREAT! Buit what is the size of each pad...like 25x43. The actual size of each pad?
|
seahawkgfx
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2007/12/07 08:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 09:46:07
(permalink)
If you need it for the standard 1080 ACX, sent me a PM and I mail it to you. For the SC and FTW techpowerup has those in their BIOS database.
|
emsir
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2016/09/02 01:40:37
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 09:51:41
(permalink)
seahawkgfx
If you need it for the standard 1080 ACX, sent me a PM and I mail it to you. For the SC and FTW techpowerup has those in their BIOS database.
Thank you, I will check. For the thickness of the pads, the official statement from EVGA, is 1 mm for all their cards. So I don't know where you got 1.5 mm and 2 mm from. Look here: http://www.evga.com/support/faq/afmmain.aspx?faqid=59314
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 10:26:27
(permalink)
Chloestick
EVGA_JacobF
New guide up that includes memory thermal pad install
Are the thermal pads that are being sent out going to include the VRAM pads in addition to the baseplate and backplate pads?
yes.
|
Gawg36
iCX Member
- Total Posts : 376
- Reward points : 0
- Joined: 2016/07/28 15:58:52
- Location: Japan (Work) U.K (home)
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 10:28:09
(permalink)
Omarlink
Gawg36
emsir
Gawg36
Omarlink
The status of thermal pads change, now says "pending shipment" but whats means? 1. The ship its coming 2. The ship is taking more time.
Well I am not holding my breath. I ordered on Oct 25, and last time I checked it said, "awaiting shipment." Or very similar. I ended up finding the measurements of all pads inc. thickness of course and have bought my own.
I think EVGA have received a deluge of requests, so I guess that statement means, "Not shipped yet, and no idea when we will." Could be waiting aloooooonnngggg time.
Good luck getting them this month for what it's worth.
Could you please post the measurements of all the pads?
Yeah. For the original 2 places, (Back plate, and above VRMs The back plate one is 2mm, the thin one above the VRMs in 1mm. But this is for the FTW which I have. The thickness is a bit different for non FTW. But, I know this thread is long, but the thickness of for all cards pads, of the first two fixes are posted several times in this thread. I recommend you check for yourself for piece of mind, and if your card is not FTW you will need to because I can't remember that. (doesn't apply to me.)
About the recent additional pads, the ones which are stuck or put onto the VRAMS themselves this is pretty new. I haven't seen definitive measurements from EVGA (I may have missed it, but I think not.)
Several people have measured and the consensus for the vrams is 1.5mm to be safe. 1 mm would probably be fine and each card will have tiny differences so I have ordered 1.5mm for the VRAMS. If it's tight, I don't see it as a problem. They will be compressed and at max they would only be a fraction of a mm to thick. Best thing is to read through here and decide about VRAM pads yourself, I am only expressing an opinion.
But, the measurements for the other two are clear and easy to find in this massive thread.
Just for the heck of it I list what I am doing. (FTW only). Large one backplate 2mm. Thin one above VRMS/mosfets 1mm. The VRAMS themselves are below that and it's a new finding so I am going with 1.5mm for them. I have spare 1mm in case it is too thick, but several people have already done the new VRAM mod and they all used 1.5mm from reading most of the posts on this massive thread.
Don't take my word for it though. I know I am right about the first two (one thick pad and one thin one) Not 100% about the new issue of VRAMS, and I am only referring to the FTW. Obvious but worth saying - the original thermal pad kit contained pads for two places. The new ones (starting a day or two ago?) are for another place. So, doing everything will require a BIOS update, and application of thermal pads on three seperate places, not the original two. Does that help?
I think its better buy the pads because is taking so a long time to ship this, i really sorry for EVGA because the next time i buy some graphic card the last option will be EVGA.
Agreed. That's what I'm doing. Just waiting on 1.5mm set!
1. Taichi z370. i7 8086k @ 5,2GHz Stable. 16GB G.Skill Trident Z @ 3,000MHz. EVGA GTX 1080ti FTW3. Acer XB270HU IPS 1440p 144Hz Refresh with G-Sync. PSU Corsair AX850. Cloud two cans, and Creative T20 stereo. Realtek HD on board sound.
|
Gawg36
iCX Member
- Total Posts : 376
- Reward points : 0
- Joined: 2016/07/28 15:58:52
- Location: Japan (Work) U.K (home)
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 10:32:02
(permalink)
emsir
seahawkgfx
If you need it for the standard 1080 ACX, sent me a PM and I mail it to you. For the SC and FTW techpowerup has those in their BIOS database.
Thank you, I will check.
For the thickness of the pads, the official statement from EVGA, is 1 mm for all their cards. So I don't know where you got 1.5 mm and 2 mm from.
Look here:
http://www.evga.com/support/faq/afmmain.aspx?faqid=59314
About thickness. If you checkout the whole thread you will see these 2mm all over the place. 1.5mm is not as certain. As for the origin of this info, good point. I think it was issued by Jacob or other EVGA rep? Oh, and on the Hexus video, they measured, live, the set from Evga. The biggest backplate one was exactly 2mm. That's certain. EDIT: the post you linked, I guess was before this whole issue arose. It may even be the reason in some cases for the new VRAM pads? But, absoutely 2mm is correct. Please check Nexus who used a kit provided by evga. Cheers.
post edited by Gawg36 - 2016/11/10 10:35:27
1. Taichi z370. i7 8086k @ 5,2GHz Stable. 16GB G.Skill Trident Z @ 3,000MHz. EVGA GTX 1080ti FTW3. Acer XB270HU IPS 1440p 144Hz Refresh with G-Sync. PSU Corsair AX850. Cloud two cans, and Creative T20 stereo. Realtek HD on board sound.
|
Gawg36
iCX Member
- Total Posts : 376
- Reward points : 0
- Joined: 2016/07/28 15:58:52
- Location: Japan (Work) U.K (home)
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 10:48:51
(permalink)
emsir
Gawg36
emsir
Gawg36
Omarlink
The status of thermal pads change, now says "pending shipment" but whats means? 1. The ship its coming 2. The ship is taking more time.
Well I am not holding my breath. I ordered on Oct 25, and last time I checked it said, "awaiting shipment." Or very similar. I ended up finding the measurements of all pads inc. thickness of course and have bought my own.
I think EVGA have received a deluge of requests, so I guess that statement means, "Not shipped yet, and no idea when we will." Could be waiting aloooooonnngggg time.
Good luck getting them this month for what it's worth.
Could you please post the measurements of all the pads?
Yeah. For the original 2 places, (Back plate, and above VRMs The back plate one is 2mm, the thin one above the VRMs in 1mm. But this is for the FTW which I have. The thickness is a bit different for non FTW. But, I know this thread is long, but the thickness of for all cards pads, of the first two fixes are posted several times in this thread. I recommend you check for yourself for piece of mind, and if your card is not FTW you will need to because I can't remember that. (doesn't apply to me.)
About the recent additional pads, the ones which are stuck or put onto the VRAMS themselves this is pretty new. I haven't seen definitive measurements from EVGA (I may have missed it, but I think not.)
Several people have measured and the consensus for the vrams is 1.5mm to be safe. 1 mm would probably be fine and each card will have tiny differences so I have ordered 1.5mm for the VRAMS. If it's tight, I don't see it as a problem. They will be compressed and at max they would only be a fraction of a mm to thick. Best thing is to read through here and decide about VRAM pads yourself, I am only expressing an opinion.
But, the measurements for the other two are clear and easy to find in this massive thread.
Just for the heck of it I list what I am doing. (FTW only). Large one backplate 2mm. Thin one above VRMS/mosfets 1mm. The VRAMS themselves are below that and it's a new finding so I am going with 1.5mm for them. I have spare 1mm in case it is too thick, but several people have already done the new VRAM mod and they all used 1.5mm from reading most of the posts on this massive thread.
Don't take my word for it though. I know I am right about the first two (one thick pad and one thin one) Not 100% about the new issue of VRAMS, and I am only referring to the FTW. Obvious but worth saying - the original thermal pad kit contained pads for two places. The new ones (starting a day or two ago?) are for another place. So, doing everything will require a BIOS update, and application of thermal pads on three seperate places, not the original two. Does that help?
GREAT! Buit what is the size of each pad...like 25x43. The actual size of each pad?
Yes, I don't know, couldn't find that info, only thickness info. Thing is that's easy to determine with a ruler and following the video guide, so it's not really needed. I am surprised that this hasn't been published though. But, I didn't really look for that as I was planning on doing my own measurments anyway, may have missed it. Once the thinkness is clear, the dimensions will be easy to do.
1. Taichi z370. i7 8086k @ 5,2GHz Stable. 16GB G.Skill Trident Z @ 3,000MHz. EVGA GTX 1080ti FTW3. Acer XB270HU IPS 1440p 144Hz Refresh with G-Sync. PSU Corsair AX850. Cloud two cans, and Creative T20 stereo. Realtek HD on board sound.
|
emsir
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2016/09/02 01:40:37
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 10:54:41
(permalink)
Gawg36
emsir
seahawkgfx
If you need it for the standard 1080 ACX, sent me a PM and I mail it to you. For the SC and FTW techpowerup has those in their BIOS database.
Thank you, I will check.
For the thickness of the pads, the official statement from EVGA, is 1 mm for all their cards. So I don't know where you got 1.5 mm and 2 mm from.
Look here:
http://www.evga.com/support/faq/afmmain.aspx?faqid=59314
About thickness. If you checkout the whole thread you will see these 2mm all over the place. 1.5mm is not as certain.
As for the origin of this info, good point. I think it was issued by Jacob or other EVGA rep? Oh, and on the Hexus video, they measured, live, the set from Evga. The biggest backplate one was exactly 2mm.
That's certain.
EDIT: the post you linked, I guess was before this whole issue arose. It may even be the reason in some cases for the new VRAM pads? But, absoutely 2mm is correct. Please check Nexus who used a kit provided by evga. Cheers.
No no this information from EVGA is related to this issue, so I will stick with the recommended 1 mm from EVGA. Regarding to the link to Techpowerup about the size of the pads. There is no info about size of the pads, so why do you link to something not available? Even more strange....why do you want pm about size of the pads for the standard card? Is it secret? Yes i know there is a lot of misleading posts about the thickness. It's very annoying people post wrong numbers. They think they know somethng, and pretending to be "specialists".
|
vampyren
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2016/11/01 15:52:42
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 11:12:44
(permalink)
fightinfilipino
if you own a car, doesn't mean you can blast 100mph down a residential street
if you own a house, doesn't mean it's a good idea to fire up a coal BBQ inside the house
if you own a CPU, doesn't mean it's a good idea to overvolt it, run your cooling at 30%, and then run Prime95 for hours
ffs these are the most absurd posts i have ever seen. no card maker, EVGA or otherwise, is required to create cooling that anticipates that the end user is going to be a nonce and blatantly ignore warnings from Nvidia.
just because you own a thing doesn't mean it's the manufacturer's fault when you do something patently stupid with it.
good lord, the logic in here is astounding.
Again your saying things that are not true. The card does not come with a disclaimer. If there are limitations with the card it should state it clearly in the manual / box. And again other cards don't have the same issue. Wonder why! Your examples are just not comparable. But if you want to take the car example, its like saying you buy a Ferrari and drive it at 200km/h which is like nothing for such a car and it breaks after a week. Your dealer tells you, well you pushed it to hard. Your logic is simply broken. Now i respect EVGA for doing all they can but i don't like people like yourself going around and pretending there is nothing wrong here. If this was nothing EVGA wouldn't make new bios for all the series, create pads etc. I doubt they are in charity business.
|
vampyren
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2016/11/01 15:52:42
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 11:16:59
(permalink)
@EVGA_JacobF
Would it be possible to put up the original firmware for people using the thermal pads? I also did not know i could backup the firmware using GPU-Z so already to late for me. I got the 1080 FTW gaming AC3.0
It seems from what i read that the card will run much cooler with the pads and the extra fan speed will not really be necessary. What do you think?
|
seahawkgfx
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2007/12/07 08:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 11:23:09
(permalink)
vampyren
@EVGA_JacobF
Would it be possible to put up the original firmware for people using the thermal pads? I also did not know i could backup the firmware using GPU-Z so already to late for me. I got the 1080 FTW gaming AC3.0
It seems from what i read that the card will run much cooler with the pads and the extra fan speed will not really be necessary. What do you think?
https://www.techpowerup.c...-gtx1080-8192-160607-1
|
Gawg36
iCX Member
- Total Posts : 376
- Reward points : 0
- Joined: 2016/07/28 15:58:52
- Location: Japan (Work) U.K (home)
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 11:26:17
(permalink)
emsir
Gawg36
emsir
seahawkgfx
If you need it for the standard 1080 ACX, sent me a PM and I mail it to you. For the SC and FTW techpowerup has those in their BIOS database.
Thank you, I will check.
For the thickness of the pads, the official statement from EVGA, is 1 mm for all their cards. So I don't know where you got 1.5 mm and 2 mm from.
Look here:
http://www.evga.com/support/faq/afmmain.aspx?faqid=59314
About thickness. If you checkout the whole thread you will see these 2mm all over the place. 1.5mm is not as certain.
As for the origin of this info, good point. I think it was issued by Jacob or other EVGA rep? Oh, and on the Hexus video, they measured, live, the set from Evga. The biggest backplate one was exactly 2mm.
That's certain.
EDIT: the post you linked, I guess was before this whole issue arose. It may even be the reason in some cases for the new VRAM pads? But, absoutely 2mm is correct. Please check Nexus who used a kit provided by evga. Cheers.
No no this information from EVGA is related to this issue, so I will stick with the recommended 1 mm from EVGA. Regarding to the link to Techpowerup about the size of the pads. There is no info about size of the pads, so why do you link to something not available? Even more strange....why do you want pm about size of the pads for the standard card? Is it secret?
Yes i know there is a lot of misleading posts about the thickness. It's very annoying people post wrong numbers. They think they know somethng, and pretending to be "specialists".
The video is Hexus, not techpower up. I am NOT linking to anything. You can find that yourself, actually on the first page of this thread I think Jacob linked to the video, but it's widely available. But NOT Techpower up, Hexus. I am 100% sure the backplate thick pad is 2mm. Unless Hexus measured wrongly, but they did it live, so I doubt it. Don't accuse me of linking. I made no link. LOOK at the post. What the heck are you on about PM. I have not sent any Pm to anyone about this. You didn't read at all, and accused me of stuff I didn't do or say. Please please, if you spend 5 minutes researching you will find that what I said about thickness is correct. No doubt. I don't appreciate you saying I linked or sent PM I did no such thing, and how would you know if I PMed someone anyway. Your post is nonsense. Go ahead, use the 1mm, in fact it may work, but that's not what EVGA send. The evga kit, wide pad is 2mm thick period. I am repeating so perhaps you will take the time to read. Again it's exceedingly rude, wrong, and plain lies to say I made a LInk I DID NOT Open you ......eyes. Same goes for PM nothing. Really I don't know how you could be so mistaken and not read properly. EDIT Jacobs linked video is Gamer Nexus, not Hexus - just to be completely clear.
post edited by Gawg36 - 2016/11/10 12:43:44
1. Taichi z370. i7 8086k @ 5,2GHz Stable. 16GB G.Skill Trident Z @ 3,000MHz. EVGA GTX 1080ti FTW3. Acer XB270HU IPS 1440p 144Hz Refresh with G-Sync. PSU Corsair AX850. Cloud two cans, and Creative T20 stereo. Realtek HD on board sound.
|
Gawg36
iCX Member
- Total Posts : 376
- Reward points : 0
- Joined: 2016/07/28 15:58:52
- Location: Japan (Work) U.K (home)
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 11:30:41
(permalink)
Emsir, I apologize if that post was directed at seahawkkgfx. It it was to me it's wrong what you said. Sorry in advance, just in case
1. Taichi z370. i7 8086k @ 5,2GHz Stable. 16GB G.Skill Trident Z @ 3,000MHz. EVGA GTX 1080ti FTW3. Acer XB270HU IPS 1440p 144Hz Refresh with G-Sync. PSU Corsair AX850. Cloud two cans, and Creative T20 stereo. Realtek HD on board sound.
|
DamZe
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2015/09/23 07:28:52
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 12:25:23
(permalink)
ETA on when the updated thermal mod(vRAM) will ship?
My humble setup: Intel i7 4790K - EVGA GTX 1070 FTW ACX 3.0 - ASUS Z97M-PLUS - Samsung 850 EVO 500GB - 16 GB G.Skill Trident X 1866mhz 8CL - EVGA SuperNOVA G2 550W - SilverStone Precision PS07 - Acer G237HL Monitor - EVGA Torq X5 Gaming Mouse - Turtle Beach Impact 700 Keyboard
|
Gawg36
iCX Member
- Total Posts : 376
- Reward points : 0
- Joined: 2016/07/28 15:58:52
- Location: Japan (Work) U.K (home)
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 12:39:05
(permalink)
DamZe
ETA on when the updated thermal mod(vRAM) will ship?
Any pads that have NOT yet shipped will include the VRAM pads. So originally only 2, back plate and above VRM/Mosfets. Now there are 3 seperate types, the third one is the VRAM one that you are asking about. I am sorry to say all that, I think you already know, you just wondered about shipping of the VRAM pads. I wrote it all (this whole post I mean) clearly because a little earlier in this thread someone said I was wrong about the thickness. They also said I included a link. And unbelievably that I sent some kind of PM - I don't even know what he's talking about. I NEVER made any link. I NEVER sent or offered to send a PM. I am correct about the thickness of the original two (thick and thin pads) It's abundantly clear and it's even in the Nexus video that Jacob linked to on the first page of this thread. That's why I am being super clear, people seem restless, and I was contradicted (that's OK) and I was accused of links and PM (That's NOT ok - I never did any such thing. Please understand DamZe, this has nothing to do with you and is not directed to you in anyway. I am just hoping EMSIR will clarify his situation. I am stumped about this, and annoyed at being mis quoted. If you or anyone looks above, and checks the nexus video link on Page 1 it's clear I was stating what is true, that's all. @EMSIR Did you direct you post to me? Or were you mistaken? I would just like to know. I won't flame at all, I am just so curious how this happened. Thank you
1. Taichi z370. i7 8086k @ 5,2GHz Stable. 16GB G.Skill Trident Z @ 3,000MHz. EVGA GTX 1080ti FTW3. Acer XB270HU IPS 1440p 144Hz Refresh with G-Sync. PSU Corsair AX850. Cloud two cans, and Creative T20 stereo. Realtek HD on board sound.
|
Chloestick
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2016/10/20 15:45:40
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 13:16:41
(permalink)
vampyren
@EVGA_JacobF
Would it be possible to put up the original firmware for people using the thermal pads? I also did not know i could backup the firmware using GPU-Z so already to late for me. I got the 1080 FTW gaming AC3.0
It seems from what i read that the card will run much cooler with the pads and the extra fan speed will not really be necessary. What do you think?
Use Afterburner or Precision to make your own custom fan curve. Don't need to revert the BIOS really.
|
gahelm
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2015/04/17 13:26:34
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 15:08:18
(permalink)
Many people, myself included, do not want to run any additional software on their computer so they cannot use a custom fan curve. The new fan curve is far too aggressive and has turned my card into a small Hoover. Even the second iteration that they just released is still too loud. If we have the thermal pads in place we shouldn't need this new noisy fan curve if I am understanding the issues correctly. Having said that, I would like to be able to use an Official EVGA update program to restore my original fan curve when my new card with proper thermal pads arrives.
|
emsir
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2016/09/02 01:40:37
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 15:17:55
(permalink)
Gawg36
emsir
Gawg36
emsir
seahawkgfx
If you need it for the standard 1080 ACX, sent me a PM and I mail it to you. For the SC and FTW techpowerup has those in their BIOS database.
Thank you, I will check.
For the thickness of the pads, the official statement from EVGA, is 1 mm for all their cards. So I don't know where you got 1.5 mm and 2 mm from.
Look here:
http://www.evga.com/support/faq/afmmain.aspx?faqid=59314
About thickness. If you checkout the whole thread you will see these 2mm all over the place. 1.5mm is not as certain.
As for the origin of this info, good point. I think it was issued by Jacob or other EVGA rep? Oh, and on the Hexus video, they measured, live, the set from Evga. The biggest backplate one was exactly 2mm.
That's certain.
EDIT: the post you linked, I guess was before this whole issue arose. It may even be the reason in some cases for the new VRAM pads? But, absoutely 2mm is correct. Please check Nexus who used a kit provided by evga. Cheers.
No no this information from EVGA is related to this issue, so I will stick with the recommended 1 mm from EVGA. Regarding to the link to Techpowerup about the size of the pads. There is no info about size of the pads, so why do you link to something not available? Even more strange....why do you want pm about size of the pads for the standard card? Is it secret?
Yes i know there is a lot of misleading posts about the thickness. It's very annoying people post wrong numbers. They think they know somethng, and pretending to be "specialists".
The video is Hexus, not techpower up. I am NOT linking to anything. You can find that yourself, actually on the first page of this thread I think Jacob linked to the video, but it's widely available.
But NOT Techpower up, Hexus. I am 100% sure the backplate thick pad is 2mm. Unless Hexus measured wrongly, but they did it live, so I doubt it. Don't accuse me of linking. I made no link. LOOK at the post. What the heck are you on about PM. I have not sent any Pm to anyone about this. You didn't read at all, and accused me of stuff I didn't do or say.
Please please, if you spend 5 minutes researching you will find that what I said about thickness is correct. No doubt.
I don't appreciate you saying I linked or sent PM I did no such thing, and how would you know if I PMed someone anyway.
Your post is nonsense. Go ahead, use the 1mm, in fact it may work, but that's not what EVGA send. The evga kit, wide pad is 2mm thick period. I am repeating so perhaps you will take the time to read. Again it's exceedingly rude, wrong, and plain lies to say I made a LInk I DID NOT Open you ......eyes. Same goes for PM nothing. Really I don't know how you could be so mistaken and not read properly.
EDIT Jacobs linked video is Gamer Nexus, not Hexus - just to be completely clear.
You got it all wrong.....I was asking you about the SIZE and NOT the thickness. Read my post. I asked if you knew the actual size....like 25,2 mm wide X 16,5 mm high or whatever. Í don't really care about what Nexus says in his video. I know for a fact that the pads EVGA sends out are 1mm. If Nexus says they are 2 mm, I really don't care. About the PM. You wrote that if i had the Standard GTX 10 card I could PM you. Look in your posts and see. But it really doesn't matter, I was just wondering why i should send you a PM.
|
vampyren
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2016/11/01 15:52:42
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 15:47:53
(permalink)
seahawkgfx
vampyren
@EVGA_JacobF
Would it be possible to put up the original firmware for people using the thermal pads? I also did not know i could backup the firmware using GPU-Z so already to late for me. I got the 1080 FTW gaming AC3.0
It seems from what i read that the card will run much cooler with the pads and the extra fan speed will not really be necessary. What do you think?
https://www.techpowerup.c...-gtx1080-8192-160607-1
Thanks allot! Chloestick
vampyren
@EVGA_JacobF
Would it be possible to put up the original firmware for people using the thermal pads? I also did not know i could backup the firmware using GPU-Z so already to late for me. I got the 1080 FTW gaming AC3.0
It seems from what i read that the card will run much cooler with the pads and the extra fan speed will not really be necessary. What do you think?
Use Afterburner or Precision to make your own custom fan curve. Don't need to revert the BIOS really.
Sure, i will be using Precision on the side with the original FW. I like to have it lower to start with and modify it upwards then the other way around.
|
datalore44
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/09/06 14:35:45
- Status: offline
- Ribbons : 0
Re: Update 11/9/16 with NEW BIOS - EVGA GeForce GTX 1080/1070/1060 PWM Temperature Upadate
2016/11/10 19:32:06
(permalink)
Hi.
Sorry this may have already been answered elsewhere, but could you tell me when the thermal pads will be sent to the uk as it says I am still awaiting shipping?
|
david4910
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2012/10/20 07:34:03
- Status: offline
- Ribbons : 0
Re: Update 11/9/16 with NEW BIOS - EVGA GeForce GTX 1080/1070/1060 PWM Temperature Upadate
2016/11/10 21:16:03
(permalink)
Hello, how long does it take to get the pads to NY ?? please
|
seahawkgfx
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2007/12/07 08:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 21:55:35
(permalink)
gahelm
Many people, myself included, do not want to run any additional software on their computer so they cannot use a custom fan curve. The new fan curve is far too aggressive and has turned my card into a small Hoover. Even the second iteration that they just released is still too loud. If we have the thermal pads in place we shouldn't need this new noisy fan curve if I am understanding the issues correctly. Having said that, I would like to be able to use an Official EVGA update program to restore my original fan curve when my new card with proper thermal pads arrives.
They released a modified version?
|
Zernmorx
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/08/09 19:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 22:56:15
(permalink)
Do I need to install the primary and secondary bios? Sorry if its a dumb question.
|
seahawkgfx
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2007/12/07 08:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 23:10:32
(permalink)
If you use both yes, if you only use one, you only need to up-date this one.
|
Zernmorx
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/08/09 19:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 23:46:11
(permalink)
seahawkgfx
If you use both yes, if you only use one, you only need to up-date this one.
Ok so if only 1 vid card installed only need the one then. Gotcha Thanks for the info
|
m0bbed
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2013/10/18 11:45:20
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 23:47:49
(permalink)
Question on the 06G-P4-6163-KR - EVGA GeForce GTX 1060 SC. For this model there is no Thermal Pad Kit available, only a BIOS Update Primary BIOS (86.06.39.00.62). What are the changes in the fan control? Is that Bios with the 0db Feature at IDLE mode?
|
seahawkgfx
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2007/12/07 08:32:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/10 23:54:59
(permalink)
Zernmorx
seahawkgfx
If you use both yes, if you only use one, you only need to up-date this one.
Ok so if only 1 vid card installed only need the one then. Gotcha Thanks for the info
No, it depends if you have a card with 2 BIOS versions (FTW + Classi). Those have switch with which you can switch between primary and secondary BIOS. It has nothing to do with the number of cards installed.
|
delicieuxz
New Member
- Total Posts : 77
- Reward points : 0
- Joined: 2009/09/05 08:15:28
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1080/1070 PWM Operating Temperature Update
2016/11/11 00:01:31
(permalink)
A BIOS update will only update the BIOS that's currently being used on the card. So, if you want to update both BIOSes, then you have to run the BIOS update once, then shut-down the PC, switch the dual-BIOS to the other BIOS, then boot up the PC and run the BIOS update again, so that the second BIOS also gets updated.
If you only update one of the BIOSes for a dual-BIOS card, the other BIOS will remain untouched.
|