RKarov
 
Thank you so the Primary Bios for the GTX 1080 FTW is the one when the card is switched to the Master Bios right?

 
Yeppers....Primary/Master....Secondary/Slave

Just tested with my 1080 FTW (case is Corsair 780T, good airflow)
 
At idle the fans still doesn't spin, hitting up to 40c. After playing BF4 for a few minutes the fans go up to 1700~1720rpm at 67c, doesn't go above that here. This is without any custom fan curve and just letting the card handle the temps/fans by itself.
 
I believe it can go even higher if you have a small case or not so good airflow but for me at least the fans are quieter and slower than selecting the aggressive profile manually.

EVGA GeForce GTX 1070 FTW ACX 3.0 Primary BIOS (86.04.3b.00.72) WRONG.....gpu-z shows Primary BIOS (86.04.50.00.72)  HELP

Would anyone know if 1.5 mm thick pads are thick enough for the application?

The technician who analyzed and said that EVGA has no protection system against short circuit and overload, managed to turn the GTX 1070 FTW in a 1080 GTX! https://www.youtube.com/watch?v=pRVicvkgeZU

vipers33
EVGA GeForce GTX 1070 FTW ACX 3.0 Primary BIOS (86.04.3b.00.72) WRONG.....gpu-z shows Primary BIOS (86.04.50.00.72)  HELP

Fixed, sorry the file is correct just the description was wrong. 86.04.50.00.72 is correct.

Rain_1
so I downloaded 6276.zip and installed the new primary bios on my 08G-P4-6276-KR. However, GPU-Z is now listing the Bios version as 86.04.50.00.72, which doesn't match the information contained on the first message about which version the bios will be after the patch:  Primary BIOS (86.04.3b.00.72)
 
It does match, however, the bios version of the 08G-P4-6173-KR/KB card.
 
Now what?

This is correct. Post updated, sorry about that.

Phew, got worried for a little bit.
 
Thanks for the prompt response.

Poliacido

vipers33
EVGA GeForce GTX 1070 FTW ACX 3.0 Primary BIOS (86.04.3b.00.72) WRONG.....gpu-z shows Primary BIOS (86.04.50.00.72)  HELP

it is just a typo
we all have now 86.04.50.00.72

It's cool, because I already flooded afterwards with the fear that soon something will burn 
 

Xavi91
Can you guys share the new curve please?

I'm asking to everyone with the new bios and some evga guys, no answer at all, I begin to think it's a legend 

ilyama

Xavi91
Can you guys share the new curve please?

I'm asking to everyone with the new bios and some evga guys, no answer at all, I begin to think it's a legend 

100% all the way (The legend comment and fan curve requirement)

Handroxrj
Updated the bios of my 08G-P4-6276-KR - EVGA GeForce GTX 1070 FTW ACX 3.0 utilzando the bios available for this link in the main post - 08G-P4-6276-KR - EVGA GeForce GTX 1070 FTW ACX 3.0 - Primary BIOS (86.04.3b.00.72), it happens that after the update the numbering of the bios that appears in the GPU-Z is the Primary BIOS was made (86.04.50.00.72) and not of Primary BIOS (86.04.3b.00.72) this correct it?

Yes...that was a typo and is now corrected.

ilyama

Xavi91
Can you guys share the new curve please?

I'm asking to everyone with the new bios and some evga guys, no answer at all, I begin to think it's a legend 

Please excuse my insistence. I'm trying to ascertain if 1.5 mm thick pads are thick enough for the application. Anyone who has applied thermal pads already that could provide some feedback. The information so far is that the pads EVGA will provide are ~1.8-2 mm thick. I'm trying to source the materials myself and finding pads thicker that 1.5 mm is proving to be troublesome. 

Are you running on AMD platform?
If so, you need to contact support for a different file.
 

EVGA_JacobF

LLOYD1985
The BIOS update isn't working, I click on the update the screen flashes and the BIOS window closes. I don't get the chance to press Y. I check the GPU BIOS in GPU-z and it still shows 86.04.17.00.80.

Are you using an AMD motherboard by any chance? If so please contact support@evga.com, you will need a different update.