EVGA

Helpful ReplyHot!Supported memory list?

Page: < 12345 > Showing page 2 of 5
Author
kalsim
New Member
  • Total Posts : 84
  • Reward points : 0
  • Joined: 2015/06/19 22:40:11
  • Status: offline
  • Ribbons : 1
Re: Supported memory list? 2021/08/10 13:00:11 (permalink)
Hoggle
Luckily the board is new so bios updates could come out fairly often. I would contact support if you run into any RAM issues since they could be fixed.


Support wouldn't assist me with anything over 3200MHz.

11700K 5.0 2C / 4.9 8C | EVGA Z590 FTW 1.05 | EVGA RTX 3080Ti FTW3 Ultra | EVGA 750 G2 | 2x16GB DR G.Skill TridentZ 3600 CL16 @ 3466 CL14 Gear 1 | Samsung 980 Pro NVMe 1TB | Phanteks Evolv ATX | Alienware 34" AW3418DW
#31
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/10 13:09:00 (permalink)
my guess is that so much of this is actually based on the CPU IMC and silicone lottery the motherboard makers really can't control it.


#32
B0baganoosh
FTW Member
  • Total Posts : 1091
  • Reward points : 0
  • Joined: 2009/08/04 04:27:18
  • Status: offline
  • Ribbons : 11
Re: Supported memory list? 2021/08/10 13:35:25 (permalink)
G.Skill TridentZ RGB 4000MHz 2x16GB, 16-19-19-39, 1.40V
P/N: F4-4000C16D-32GTZR
Modules: Samsung B-Die
Tested in Z590 FTW. Runs XMP profile 1 at above specs (gear 2). I clicked XMP 1, then changed it to 3733MHz, gear 1, 1.45V, 16-16-39 and it has been running with zero issues since the first bios (I am on the latest now (1.06?)). It booted if I left it at 1.4V (I think BIOS shows 1.43 for the reading when set at 1.4), but I'd have some issues with stability tests after tightening the timings above. I did not adjust any other settings for it.
 
post edited by B0baganoosh - 2021/08/26 14:16:29

Formerly Nike_7688 (please refer to post#77 here for info)

i9 11900k - EVGA Z590 FTW - EVGA RTX 3080 ti FTW3 Ultra (+Hybrid Kit) - 32GB 3733MHz CAS16 G.Skill, gear1 - WD SN850 2TB NVMe Gen4 - BeQuiet! Dark Base 900 Pro. Project Dark Water MODS RIGS post for build notes.
#33
BadgerPelt
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2009/03/31 15:04:42
  • Status: offline
  • Ribbons : 0
Re: Supported memory list? 2021/08/11 15:44:27 (permalink)
G.SKILL Trident Z Royal Series 32GB (2 x 16GB) F4-4800C20D-32GTRG
I can confirm these boot up in XMP 4800 and run without issues on the Z590 Dark
#34
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/12 06:34:07 (permalink)
F4-4800C20D-32GTEG 2x16 @ 4800mhz XMP1 boots and runs great on the Z590 Dark.


#35
wmmills
CLASSIFIED ULTRA Member
  • Total Posts : 5408
  • Reward points : 0
  • Joined: 2006/01/04 20:47:29
  • Location: New Jersey
  • Status: offline
  • Ribbons : 33
Re: Supported memory list? 2021/08/12 08:01:12 (permalink)
rblaes_99
my guess is that so much of this is actually based on the CPU IMC and silicone lottery the motherboard makers really can't control it.


Exactly! The best the mobo's can do is to make sure the power getting to them is clean, the rest is up to the cpu imc and sticks. With speeds that high, imo, i wouldnt touch xmp at all and make sure its fully disabled cause its just terrible. Id look up a list of sticks with different timings at the same speeds that others, manufacturers, are using commercially too and then input a tick higher timings with the speed you want to run. Your def going to have to run the voltage a tick or two higher with 16gb sticks and running 4 or more of them. Def run them with a 2 command rate cause a 1 will def crash them if thats part of the issue. Ram are finicky creatures and even one timing being off will crash them right out. XMP is so hit or miss and it over volts your sticks etc... Just not good for what you guys are trying to do, but i really hope you guys work it out and get what you want.

MOBO: EVGA x299 Dark, CPU: I9 10900X, RAM: Patriot Viper RGB 3600 32gb, SSD: Samsung 860 EVO 1TB, M2: Samsung 970 EVO+ 1TB, PSU: CoolerMaster M2 1500, CPU HSF: EVGA 240 CLC HSF~ P/P 88CFM Yate Loons, G-CARD:EVGA RTX3090 FTW3 Ultra Gaming, CASE: LIAN-LI PC-V2010B w/ Window mod, OS: Windows 10 Pro 64bit, MON: Alienware AW3821DW, HdSet: steelseries Siberia 

Help Our Vets From K-2! https://strongholdfreedomfoundation.org
[p
#36
RogueMaster
Superclocked Member
  • Total Posts : 230
  • Reward points : 0
  • Joined: 2007/03/19 20:15:42
  • Status: offline
  • Ribbons : 1
Re: Supported memory list? 2021/08/12 12:09:32 (permalink)
How do we determine what modules are on the sticks? Curious about whether I have the B dies or not.

I think I have the F4-4000C18D-64GTZR sticks (I'm not at home to look, so the model number may be wrong) for the new build.


#37
DEJ915
iCX Member
  • Total Posts : 424
  • Reward points : 0
  • Joined: 2013/11/03 21:58:26
  • Status: online
  • Ribbons : 8
Re: Supported memory list? 2021/08/12 13:04:05 (permalink)
RogueMaster
How do we determine what modules are on the sticks? Curious about whether I have the B dies or not.

I think I have the F4-4000C18D-64GTZR sticks (I'm not at home to look, so the model number may be wrong) for the new build.

bdie is only 8Gb (1GB) size chip so maximum of 16GB per module, if your modules are 32GB they can't be bdie.
#38
frankd3
Superclocked Member
  • Total Posts : 205
  • Reward points : 0
  • Joined: 2011/05/20 06:20:30
  • Location: FL --> OH
  • Status: offline
  • Ribbons : 2
Re: Supported memory list? 2021/08/12 13:15:23 (permalink)
DEJ915
RogueMaster
How do we determine what modules are on the sticks? Curious about whether I have the B dies or not.

I think I have the F4-4000C18D-64GTZR sticks (I'm not at home to look, so the model number may be wrong) for the new build.

bdie is only 8Gb (1GB) size chip so maximum of 16GB per module, if your modules are 32GB they can't be bdie.


Thank you. That's helps me too.
#39
Nereus
Captain Goodvibes
  • Total Posts : 16513
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 52
Re: Supported memory list? 2021/08/12 14:20:08 (permalink)
 
Thaiphoon Burner app will tell you.
http://www.softnology.biz/files.html
 
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (3-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)

  BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

#40
Nereus
Captain Goodvibes
  • Total Posts : 16513
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 52
Re: Supported memory list? 2021/08/12 17:00:58 (permalink)
 
Updated my earlier post here. The G.Skill 4800MHz was just delivered. Posted on XMP without a hitch.
 
G.Skill Trident Z Royal Elite 4800MHz 2x16GB
P/N: F4-4800C20D-32GTES
Modules: Hynix
Tested with 2 sticks on Z590 Dark. Loaded XMP defaults and Gear 2, saved and rebooted, posted no problem at all.
 
Thanks rblaes_99 for the help.
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (3-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)

  BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

#41
RogueMaster
Superclocked Member
  • Total Posts : 230
  • Reward points : 0
  • Joined: 2007/03/19 20:15:42
  • Status: offline
  • Ribbons : 1
Re: Supported memory list? 2021/08/12 21:40:21 (permalink)
DEJ915
bdie is only 8Gb (1GB) size chip so maximum of 16GB per module, if your modules are 32GB they can't be bdie.


Ah!  I didn't know that. Thanks for the info!


#42
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/13 03:30:27 (permalink)
https://benzhaomin.github.io/bdiefinder/


#43
kalsim
New Member
  • Total Posts : 84
  • Reward points : 0
  • Joined: 2015/06/19 22:40:11
  • Status: offline
  • Ribbons : 1
Re: Supported memory list? 2021/08/13 15:22:45 (permalink)
Just to add to this list:
 
G.Skill TridentZ 3600MHz 16-16-16-36 1.35v
P/N: F4-3600C16D-16GTZR
Modules: Samsung B-Die Dual Rank
 
2x16GB. XMP or manually, 3600MHz will not run in gear 1. Highest gear 1 speed is 3466MHz. Currently have settings at 3466MHz 14-14-14-32 1T 1.4v Gear 1.

11700K 5.0 2C / 4.9 8C | EVGA Z590 FTW 1.05 | EVGA RTX 3080Ti FTW3 Ultra | EVGA 750 G2 | 2x16GB DR G.Skill TridentZ 3600 CL16 @ 3466 CL14 Gear 1 | Samsung 980 Pro NVMe 1TB | Phanteks Evolv ATX | Alienware 34" AW3418DW
#44
BIGGZxoxo
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 2016/09/04 17:58:27
  • Status: offline
  • Ribbons : 0
Re: Supported memory list? 2021/08/19 22:46:10 (permalink)
going to test these memory sticks out next week once I receive them...
 
G.Skill Ripjaws V series 4000hz 
F4-4000C14D-32GVK
  • Timing 14-15-15-35 
  • CAS Latency 14 
  • Voltage 1.55V

i9-11900k, EVGA Z590 Dark, G.Skill Ripjaws V 32GB DDR4-4000 14-15-15-35-1.55V Gear Mode Auto, WD Black SN850 500GB M.2 Gen 4x4 NVMe(OS Drive), Intel 660p 2TB NVMe (Program Drive), EVGA 3090 K|NGP|N Hybrid, EVGA Nu Audio Pro 7.1 Surround Card, EVGA SuperNOVA 1600 T2, LIAN Li O11D XL, LIAN Li UNI Fan AL120, LIAN Li Galahad AIO, EVGA Z20 RGB Optical Mechanical Gaming Keyboard, EVGA X20 Gaming Mouse, Audio-Technica ATH-MSR7b Headphones, LG 27GN950 Monitor, LG CX48 TV
#45
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/24 04:29:11 (permalink)
i just got the 5333mhz kits back from gskill RMA..... still wont run at xmp on the dark.   not as of today at least.  


#46
Memorex636
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2010/10/20 03:27:38
  • Status: offline
  • Ribbons : 0
Re: Supported memory list? 2021/08/24 05:30:33 (permalink)
so let me get this straight even tho the Dark advertises that it supports DDR4 5333MHz+, we have no idea what Memory they used and have not found any memory that works???    Sounds like false advertisement if you ask me.
 

 

#47
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/24 06:32:46 (permalink)
yea frustrating....  i have spent a ton of money on premium ram kits too......  this has been quite the beta experiment.  


#48
DEJ915
iCX Member
  • Total Posts : 424
  • Reward points : 0
  • Joined: 2013/11/03 21:58:26
  • Status: online
  • Ribbons : 8
Re: Supported memory list? 2021/08/24 07:02:07 (permalink)
At that speed it may require manual tuning or the CPU memory controller is just not able to run at that speed.
#49
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/24 07:08:13 (permalink)
DEJ915
At that speed it may require manual tuning or the CPU memory controller is just not able to run at that speed.


correct....  i think this is exactly why there isn't a QVL for tested ram.   it would be pointless for EVGA to publish this as they have no control over the CPU you ended up with.  


#50
Nereus
Captain Goodvibes
  • Total Posts : 16513
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 52
Re: Supported memory list? 2021/08/24 09:21:12 (permalink)
rblaes_99
i just got the 5333mhz kits back from gskill RMA..... still wont run at xmp on the dark.   not as of today at least.  

Damn. :/
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (3-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)

  BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

#51
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/24 09:28:22 (permalink)
I'm shipping this 5333 kit to you Nereus so you can test.  I did update the dark BIOS today and should probably retest before i send.  


#52
BIGGZxoxo
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 2016/09/04 17:58:27
  • Status: offline
  • Ribbons : 0
Re: Supported memory list? 2021/08/26 14:06:38 (permalink)
just received my memory today and can confirm that G.Skill Ripjaws V series 4000hz F4-4000C14D-32GVK works when XMP is enabled, but Gear 1 won't post. It has to be set at Auto for it to work

i9-11900k, EVGA Z590 Dark, G.Skill Ripjaws V 32GB DDR4-4000 14-15-15-35-1.55V Gear Mode Auto, WD Black SN850 500GB M.2 Gen 4x4 NVMe(OS Drive), Intel 660p 2TB NVMe (Program Drive), EVGA 3090 K|NGP|N Hybrid, EVGA Nu Audio Pro 7.1 Surround Card, EVGA SuperNOVA 1600 T2, LIAN Li O11D XL, LIAN Li UNI Fan AL120, LIAN Li Galahad AIO, EVGA Z20 RGB Optical Mechanical Gaming Keyboard, EVGA X20 Gaming Mouse, Audio-Technica ATH-MSR7b Headphones, LG 27GN950 Monitor, LG CX48 TV
#53
B0baganoosh
FTW Member
  • Total Posts : 1091
  • Reward points : 0
  • Joined: 2009/08/04 04:27:18
  • Status: offline
  • Ribbons : 11
Re: Supported memory list? 2021/08/26 14:15:28 (permalink)
BIGGZxoxo
just received my memory today and can confirm that G.Skill Ripjaws V series 4000hz F4-4000C14D-32GVK works when XMP is enabled, but Gear 1 won't post. It has to be set at Auto for it to work



I don't think I've seen any board/memory work with 11900k's at 4000MHz gear 1.

Formerly Nike_7688 (please refer to post#77 here for info)

i9 11900k - EVGA Z590 FTW - EVGA RTX 3080 ti FTW3 Ultra (+Hybrid Kit) - 32GB 3733MHz CAS16 G.Skill, gear1 - WD SN850 2TB NVMe Gen4 - BeQuiet! Dark Base 900 Pro. Project Dark Water MODS RIGS post for build notes.
#54
Nereus
Captain Goodvibes
  • Total Posts : 16513
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 52
Re: Supported memory list? 2021/08/26 15:13:05 (permalink)
B0baganoosh
BIGGZxoxo
just received my memory today and can confirm that G.Skill Ripjaws V series 4000hz F4-4000C14D-32GVK works when XMP is enabled, but Gear 1 won't post. It has to be set at Auto for it to work

I don't think I've seen any board/memory work with 11900k's at 4000MHz gear 1.

Yup. 3600 / 3733MHz seems to be about the max for Gear 1. Some people are getting good results by down-clocking 4000MHz ram to 3600 / 3733MHz Gear 1 and then tightening up the timings.
 
post edited by Nereus - 2021/08/28 22:17:09

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (3-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)

  BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

#55
BIGGZxoxo
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 2016/09/04 17:58:27
  • Status: offline
  • Ribbons : 0
Re: Supported memory list? 2021/08/27 00:01:11 (permalink)
Nereus
B0baganoosh
BIGGZxoxo
just received my memory today and can confirm that G.Skill Ripjaws V series 4000hz F4-4000C14D-32GVK works when XMP is enabled, but Gear 1 won't post. It has to be set at Auto for it to work

I don't think I've seen any board/memory work with 11900k's at 4000MHz gear 1.

Yup. 3600MHz seems to be about the max for Gear 1. Some people are getting good results by down-clocking 4000MHz ram to 3600MHz Gear 1 and then tightening up the timings.
 




hmmm so am I better off keeping my 3600 or stick with the 4000?

i9-11900k, EVGA Z590 Dark, G.Skill Ripjaws V 32GB DDR4-4000 14-15-15-35-1.55V Gear Mode Auto, WD Black SN850 500GB M.2 Gen 4x4 NVMe(OS Drive), Intel 660p 2TB NVMe (Program Drive), EVGA 3090 K|NGP|N Hybrid, EVGA Nu Audio Pro 7.1 Surround Card, EVGA SuperNOVA 1600 T2, LIAN Li O11D XL, LIAN Li UNI Fan AL120, LIAN Li Galahad AIO, EVGA Z20 RGB Optical Mechanical Gaming Keyboard, EVGA X20 Gaming Mouse, Audio-Technica ATH-MSR7b Headphones, LG 27GN950 Monitor, LG CX48 TV
#56
B0baganoosh
FTW Member
  • Total Posts : 1091
  • Reward points : 0
  • Joined: 2009/08/04 04:27:18
  • Status: offline
  • Ribbons : 11
Re: Supported memory list? 2021/08/27 04:02:43 (permalink)
Some of us (including myself) bought 4000MHz memory and downclocked it to 3733MHz for Gear 1 operation and just tightened the timings as much as possible. 3733 cas14 gear 1 would be pretty awesome if your setup will allow it. Not all combos are ok with 3733 gear 1, so ymmv

Formerly Nike_7688 (please refer to post#77 here for info)

i9 11900k - EVGA Z590 FTW - EVGA RTX 3080 ti FTW3 Ultra (+Hybrid Kit) - 32GB 3733MHz CAS16 G.Skill, gear1 - WD SN850 2TB NVMe Gen4 - BeQuiet! Dark Base 900 Pro. Project Dark Water MODS RIGS post for build notes.
#57
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/27 12:30:51 (permalink)
I put the 5333mhz elite kit in the mail heading for Nereus today to test/benchmark on his dark.  It would not run on XMP for me.  


#58
B0baganoosh
FTW Member
  • Total Posts : 1091
  • Reward points : 0
  • Joined: 2009/08/04 04:27:18
  • Status: offline
  • Ribbons : 11
Re: Supported memory list? 2021/08/27 12:35:31 (permalink)
rblaes_99
I put the 5333mhz elite kit in the mail heading for Nereus today to test/benchmark on his dark.  It would not run on XMP for me.  



I'd have been happy to test them at 5100 in my FTW if you wanted 

Formerly Nike_7688 (please refer to post#77 here for info)

i9 11900k - EVGA Z590 FTW - EVGA RTX 3080 ti FTW3 Ultra (+Hybrid Kit) - 32GB 3733MHz CAS16 G.Skill, gear1 - WD SN850 2TB NVMe Gen4 - BeQuiet! Dark Base 900 Pro. Project Dark Water MODS RIGS post for build notes.
#59
rblaes_99
FTW Member
  • Total Posts : 1575
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 8
Re: Supported memory list? 2021/08/27 14:42:05 (permalink)
B0baganoosh
rblaes_99
I put the 5333mhz elite kit in the mail heading for Nereus today to test/benchmark on his dark.  It would not run on XMP for me.  



I'd have been happy to test them at 5100 in my FTW if you wanted 




DM me your mailing address and I will send Nereus a shipping label from his house to yours when he is done playing with my Flava-Flav kit.  


#60
Page: < 12345 > Showing page 2 of 5
Jump to:
  • Back to Mobile