Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/11 07:34:54
(permalink)
jdmwrxpower Sure does. I had the 9900k as well and just upgraded the mb and cpu. The mono block works extremely but the caviat is if you need to change thermal paste etc. It is quite a bit as it's screwed in at multiple points
Yeah I wouldn't go monoblock personally, already have a base kit from EK that's the Quantum P360, just upgraded the radiator to a 480mm XE/60mm thickness version. Right now I'm looking in to what motherboard to go with for the potential 10900K/10850K upgrade path I think I've settled on since the 11700K early review is so underwhelming, I'm expecting the 11900K to be "meh" too, and I'd rather have 10 cores than 8 if I can get'em. Right now Newegg has the 10850K at $396 after a $15 promo code, with Crysis Remastered included free, so I'm doing my research in to what motherboard to get, I may get things ordered as early as tonight - I'd love to wait & get an eVGA Z590 Dark, but with the VRM heatsink being rotated, it would be in the way of my GPU's backplate cooling setup, so I don't think that's an option, and that also rules out the Z490 Dark too :( I could always get the Z590 Dark & run the 3090 in the 2nd slot (4.0 x8 = 3.0 x16 in bandwidth, right? Right.) But that would look kinda silly. Decisions decisions.
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
jdmwrxpower
Superclocked Member
- Total Posts : 116
- Reward points : 0
- Joined: 2020/09/20 03:53:12
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/11 07:39:56
(permalink)
Dabadger84
jdmwrxpower Sure does. I had the 9900k as well and just upgraded the mb and cpu. The mono block works extremely but the caviat is if you need to change thermal paste etc. It is quite a bit as it's screwed in at multiple points
Yeah I wouldn't go monoblock personally, already have a base kit from EK that's the Quantum P360, just upgraded the radiator to a 480mm XE/60mm thickness version. Right now I'm looking in to what motherboard to go with for the potential 10900K/10850K upgrade path I think I've settled on since the 11700K early review is so underwhelming, I'm expecting the 11900K to be "meh" too, and I'd rather have 10 cores than 8 if I can get'em. Right now Newegg has the 10850K at $396 after a $15 promo code, with Crysis Remastered included free, so I'm doing my research in to what motherboard to get, I may get things ordered as early as tonight - I'd love to wait & get an eVGA Z590 Dark, but with the VRM heatsink being rotated, it would be in the way of my GPU's backplate cooling setup, so I don't think that's an option, and that also rules out the Z490 Dark too :( I could always get the Z590 Dark & run the 3090 in the 2nd slot (4.0 x8 = 3.0 x16 in bandwidth, right? Right.) But that would look kinda silly. Decisions decisions.
I'm using the Gigabyte Aorus MB. No issues. The rabbit hole continues lol.
|
rlb9682
FTW Member
- Total Posts : 1049
- Reward points : 0
- Joined: 2009/02/26 08:23:20
- Status: offline
- Ribbons : 11
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/11 08:04:25
(permalink)
This is my 3080FE. I'm liking the 12 pin cable now that companies like EVGA and Corsair are offering a single 12 cable (single on the gpu side anyway).
post edited by rlb9682 - 2021/03/11 09:40:47
Attached Image(s)![](https://forums.evga.com/thumb.axd/250_632380/B25550FF47C7497DA3BD5AD14AC518D3.jpg)
Affiliate Code: PD1HHD50JK
|
Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/11 08:18:17
(permalink)
rlb9682 his is my 3080FE. I'm liking the 12 pin cable now that companies like EVGA and Corsair are offering a single 12 cable (single on the gpu side anyway).
![](https://forums.evga.com/download.axd?file=0;3238812&where=message&f=51025344388_17f2e42d3a_c.jpg)
That's a sick setup, that distro plate on the back area looks awesome & very unique, at least it's the first time I've seen it.
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
rlb9682
FTW Member
- Total Posts : 1049
- Reward points : 0
- Joined: 2009/02/26 08:23:20
- Status: offline
- Ribbons : 11
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/11 09:07:37
(permalink)
Thanks! That's the Phanteks D120 distro plate. EK makes one for about the same price and you can't go wrong with either one. Edit: here's a better? pic of the distro plate
post edited by rlb9682 - 2021/03/11 09:12:49
Attached Image(s)![](https://forums.evga.com/thumb.axd/250_632380/BDE03A09803D4D63ABC6945B66A5579C.jpg) ![](https://forums.evga.com/thumb.axd/250_632380/58F329DB92E147D5B79791DF63C9E6CC.jpg)
Affiliate Code: PD1HHD50JK
|
Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/11 09:09:49
(permalink)
Yeah I can't do hard tubing, I have PTSD from a leak that happened many moons ago now lol It looks awesome but I just couldn't do it myself.
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
Lord Winchester
Superclocked Member
- Total Posts : 222
- Reward points : 0
- Joined: 2017/12/25 16:49:25
- Status: offline
- Ribbons : 3
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/11 09:59:27
(permalink)
![](https://i.imgur.com/WMu6RQm.jpg) If you´re wondering, the protective peel is still on, because i have (want) to make some Changes. I´m going to get a Temp Display on the GPU and will swap the RGB Controller to something that addresses every Fan on its own instead of changing the Colour on all of them at once
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10332
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/12 10:14:48
(permalink)
mricypaw1 These all look amazing.
They sure are!
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
ozdeadmeat
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2021/03/13 07:15:26
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/13 08:14:49
(permalink)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10332
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/15 05:48:09
(permalink)
ozdeadmeat Some awesome setups <3
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Cellenia
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2021/02/10 07:08:28
- Location: Germany
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/15 08:58:26
(permalink)
2x RTX 3070 but the 2. one should not be from evga ....^^ As you can see, no rgb build..... (My little one was delivered today and I thought hey time to post a pic )
AMD Ryzen 9 3900x , Noctua NH-D15, Aorus x570 Pro 1.2 , 64gb 3600 cl18 Patriot , EVGA 3070 xc3 ultra, samsung odyssey g7 32, bequiet dark power pro 750w, samsung 980pro, fractal design define 7 bw , 4x bequiet PureW2 pwm 140 / 3x Dynamic X2 GP-14, Brennenstuhl Premium-Protect-Line 120k A Lenovo Legion 5 Pro: Amd Ryzen 7 5800H, RTX 3070 mobile (140w), 32gb 3200, 1tb M.2 SSD , 16" WQXGA (2560x1600) IPS 165Hz display
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/15 12:06:13
(permalink)
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10332
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/16 23:30:23
(permalink)
Cellenia 2x RTX 3070 but the 2. one should not be from evga ....^^ As you can see, no rgb build..... (My little one was delivered today and I thought hey time to post a pic )
Your image isn't showing up. What you'll need to do is use imgur to host your image. Than right click copy the image and than paste it on your post.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
213NSX
Superclocked Member
- Total Posts : 137
- Reward points : 0
- Joined: 2018/02/22 01:51:47
- Location: mt hood
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/17 01:34:04
(permalink)
Some seriously sick rigs in here bros keep it up!
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10332
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/18 08:13:32
(permalink)
213NSX Some seriously sick rigs in here bros keep it up!
They sure are and it's always nice to see each others creativity.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
fps_noob
New Member
- Total Posts : 82
- Reward points : 0
- Joined: 2015/02/07 07:28:29
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/18 13:34:36
(permalink)
Finally got my new loop together. Still sticking with soft tubing for ease of maintenance. Maybe next build I'll finally dedicate the time to hard tubing. Also one of my fans decided that it doesn't like to light up when the corsair commander pro is running, was lighting up perfectly fine on its own when I was leak testing. Oh well, going to troubleshoot that one some other time.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84164
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 85
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/18 13:39:08
(permalink)
Some really great mods here!
|
joelfuzat
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2015/06/06 12:08:11
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/21 13:37:19
(permalink)
View 71 Tempered Glass RGB Plus Edition | various Samsung Pro SSD's | 9900k delidded | BeQuiet Dark Power Pro 11 Platinum 1000w | Case fans -> silent wings 3's | FTW 3090 Ultra Hybrid w/Noctua replacement fans | Corsair h150i w/BeQuiet replacement fans
|
fps_noob
New Member
- Total Posts : 82
- Reward points : 0
- Joined: 2015/02/07 07:28:29
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/22 20:45:58
(permalink)
Fixed the RGB
|
mag9700
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2019/10/10 06:04:58
- Status: offline
- Ribbons : 0
Re: ***Show us your 3000 Series GPU***
2021/03/23 05:17:37
(permalink)
Purchased the 3080 as an open box 11/2020 and it’s been rock solid for me.
post edited by mag9700 - 2021/03/23 06:31:06
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84164
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 85
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/03/23 05:51:56
(permalink)
fps_noob Fixed the RGB
![](https://i.imgur.com/WSiZqZS.jpg)
That looks great by the way.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10332
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/04/01 14:08:09
(permalink)
rjohnson11 Some really great mods here!
They sure are RJ. Where's your beauty?
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
olaf_r
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2020/11/21 02:10:21
- Status: offline
- Ribbons : 0
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/04/03 06:33:48
(permalink)
|
kswildman
Superclocked Member
- Total Posts : 178
- Reward points : 0
- Joined: 2020/08/12 12:19:26
- Status: offline
- Ribbons : 2
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/04/03 11:29:58
(permalink)
AMD Ryzen 7 5800X3d ASUS Strix X570-E Gaming 32GB G.SKILL Trident Z Neo CL16 3600 Corsair iCUE H170i Elite Capellix 420mm AIO SAMSUNG 980 PRO SSD 2TB - PCIe 4.0 NVMe SSD Corsair RM1200x Shift ASUS TUF RTX 4090 Lian Li Lancool Mesh III RGB
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: ***Show us your 3000 Series GPU***
2021/04/03 12:16:11
(permalink)
Really nice setup Olaf. You made use of every bit of space you could to pack in performance and looks. Awesome rig bro. Love the additional info panel and the frame around it. I think you custom 3d printed that as well right?
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
olaf_r
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2020/11/21 02:10:21
- Status: offline
- Ribbons : 0
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/04/03 13:21:09
(permalink)
tks ![](https://forums.evga.com/upfiles/smiley/s1.gif) glad u like and yes its a custom prited housing for a 5" Matrix Orbital Panel it only needs a USB Connection for use with AIDA64 @kswildman to bad cant send any PM´s yet and i think its not allowed here post such files here and btw i have finshed the little KingPin Borther build to yesterday ![](https://i.imgur.com/22gLCHh.jpg)
post edited by olaf_r - 2021/04/03 13:26:33
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: ***Show us your 3000 Series GPU***
2021/04/03 14:13:18
(permalink)
Olaf, That's nice way to spend 10-15k for both custom pcs. The little brother doesn't look so little, looks to be a monster as well, just in a little smaller case. Very nice builds bro.
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10332
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/04/05 10:26:44
(permalink)
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
EthanBurke
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2021/02/09 17:18:55
- Status: offline
- Ribbons : 0
|
Nereus
Captain Goodvibes
- Total Posts : 18113
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: ***Show us your 3000 Series GPU***
2021/04/05 10:40:25
(permalink)
|