EVGA

Hot!PC is finally finished, starting off as a built to order during the shortage.

Page: << < ..678910.. > >> Showing page 10 of 15
Author
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: Do not even know what to name this... 2023/03/23 21:41:25 (permalink)
Well closer to the finish line, touchup painting to do plus the outlets. Case swap to the Lian Li Dynamic EVO really do not want to do the vinyl art again... Get my office fully put back together and I'm done. My wife helped a ton due to my back surgery the past couple days, jumped it to rabbit speed from my turtle speed.

Enjoy







Wish Lian Li made a 360 degree around spacer and an extended top panel so the glass and spacer is secure.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

rjohnson11
EVGA Forum Moderator
  • Total Posts : 84312
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Netherlands
  • Status: offline
  • Ribbons : 85
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/25 05:51:45 (permalink)
Outstanding work. 

AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

Flybye
FTW Member
  • Total Posts : 1195
  • Reward points : 0
  • Joined: 2006/11/17 23:55:10
  • Location: Miami (Cuba v2.1)
  • Status: offline
  • Ribbons : 4
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/26 15:46:23 (permalink)
You wouldn't happen to like Cyberpunk would you?
This looks awesome! I didn't realize there was such a huge collection of CP artifacts out there. Guess I haven't looked hard enough.

Gaming thing
i9-12900KF @ 5.20GHz
EVGA: Z690 Classified - RTX 3080 FTW3 Ultra - Supernova 1200w P3 - DG-75
32GBs Corsair Dominator DDR5 @ 6800 - Seagate: .5TB, 1TB M.2s, HD 4TB
Sony CRT 24" GDM-FW900 16:10 - DangerDen (RIP) Goodies: 2x120mm Rad & D5 + Primochill stuff
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/26 17:07:37 (permalink)
Flybye
You wouldn't happen to like Cyberpunk would you?
This looks awesome! I didn't realize there was such a huge collection of CP artifacts out there. Guess I haven't looked hard enough.

Just a little wee bit lol

Found the Samurai/Johnny Silverhand Xbox & PC headphones only one place still has them for sale in the US. Not sold out yet because they only have one picture up at a major office retailer.
post edited by donta1979 - 2023/03/26 17:13:58

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/26 17:10:06 (permalink)
rjohnson11
Outstanding work. 

Ty much, between Jeep events this weekend with the Jeep Club on Fri plus today and the D4 Beta all day Saturday it’s sort of been on hold. Today was a dog rescue & adoption charity.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/26 19:40:17 (permalink)
I will have to consider upgrading my board and to DDR5 at some point... My gpu goes to 3015mhz without touching the power. So it can probably go higher, also have not even bothered OCing the vram yet. I will say my DDR4 is holding me back on my bench scores. Most I can get on the CPU is just over 18.2-18.4k due to that fact. Also know the 14th gen i9's and boards are already in testers hands so that will probably be coming later this year as well. Just not sure if I want to make that jump. This pc has gone through a lot of changes since 2021.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/27 10:45:01 (permalink)
Awesome office set up Donta 😎👍.some nice led lightning around the room would be nice also..like a tron lights set up😎.

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/27 12:17:56 (permalink)
atfrico
Awesome office set up Donta 😎👍.some nice led lightning around the room would be nice also..like a tron lights set up😎.

Na thought about it, the last thing I want is wires all over the place that I have to route/try to hide. This has already mutated out of control enough... 
post edited by donta1979 - 2023/03/27 12:20:47

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/27 12:52:27 (permalink)
👀 what the hippie? 🤣🤣
You definitely need an autograph figure of keanu Reeves character😺😼

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
aka_STEVE_b
EGC Admin
  • Total Posts : 13833
  • Reward points : 0
  • Joined: 2006/02/26 06:45:46
  • Location: OH
  • Status: offline
  • Ribbons : 69
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/28 05:27:22 (permalink)
WOw, that room is insane....
 
The only thing left to do now is to actually augment/ mod your arms to pop out razor knives & hardwire up the brain directly into the system....


AMD RYZEN 9 5900X  12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/28 13:05:23 (permalink)
aka_STEVE_b
WOw, that room is insane....
 
The only thing left to do now is to actually augment/ mod your arms to pop out razor knives & hardwire up the brain directly into the system....



I would augment parts of my body that suffer from the human condition first... Getting old sucks especially my actions in service are meeting the consequences of those actions as Father Time hits me with the bat now...

Also let the fun begin so I have a side panel that goes on and is secure with the 4090... Not looking forward to any of this, yet I do not want tempered glass to maybe be all over my floors if I move the case.

post edited by donta1979 - 2023/03/28 14:13:15

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/03/30 20:52:35 (permalink)
Vinyl work will be doing over the weekend... ugh
Will peel the plastic off the glass, also hit up lian li about the one of the screws put in wrong during manufacturing on the top panel making it uneven plus pushing the glass to the side.

The Evo is a nice case, I love how easy it is to do the fans and rads. Things I hate the bend of the metal on the motherboard tray being at 90 degrees instead of at a 45 degree like my old 011, the extra fat in the cable area a bunch of useless metal I took out that made things harder than they needed to be, the glass not lighting up like my old 011, the wires/cable management cover in the case being in an odd shape making it harder to do cable management if you have fan+ARGB hubs as well. 
 




Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/01 13:40:54 (permalink)
Could use some input, sucks the traffic here has slowed down so much.
I am trying to make it not as busy as last time, Crap was right as well as some others I did go a bit overboard.
My question should I put the Cyberpunk 2077 logo on the right so text goes top to bottom, or bottom to top? Or should I put the smaller one on the bottom of the glass? Or stop with logo with minimalist?



Yes my face shows up that is my tired face was up for twenty hours yesterday, got less than three hours of sleep last night.


post edited by donta1979 - 2023/04/01 18:05:11

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/03 11:04:44 (permalink)
Will also have to come up with a new name. It’s no longer a CPPC.

May put the larger Cyberpunk 2077 on the top, the smaller one on the right, a small Relic on the front, a slightly bigger Relic on the side panel, with Kiroshi Opticals on the side not too large.




post edited by donta1979 - 2023/04/03 20:22:31

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/04 19:02:11 (permalink)
Almost there, waiting on some more displate Cyberpunk 2077 concept art to come for walls. The small touchups and putting my office back together. Getting black blinds and yeah I will be done.

Not doing any art on the side panel glass this time. 


post edited by donta1979 - 2023/04/04 22:18:03

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/05 10:35:22 (permalink)
Great choice Donta you are missing the cyberpunk figure

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/05 13:03:37 (permalink)
atfrico
Great choice Donta you are missing the cyberpunk figure

Look again they are on my desk. There is no room in the case for one.
 

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/07 14:48:09 (permalink)
Eyeballing an ASUS Rog Strix Z790 with good memory leads on how they are laid out, a 13900K or KS"KS runs cooler when not at 6ghz or close to it on turbo", some DDR5 7200-8000mhz and a new AIO.

Just waiting on Net Runner headsetup, Johnny Silverhands 1/4th scale arm, a couple key caps for the keyboard, and my final Displate order showed up of CP 2077 Concept art along with my CP 2077 xbox controller. Really wish I could have found the Johnny Silverhand headset....

Shows up tomorrow


So late last night I got an email from Displate on new Cyberpunk art... one was an OLED poster, the other things that came out were the tarriot cards... Needless to say they got my money again. Luckily I that is all I can put on my wall...

Arm Arrived!

post edited by donta1979 - 2023/04/08 13:32:21

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

Delirious
EVGA Forum Moderator
  • Total Posts : 11188
  • Reward points : 0
  • Joined: 2007/11/15 13:34:04
  • Location: at my computer
  • Status: offline
  • Ribbons : 61
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/07 15:13:37 (permalink)


"Be quick to listen, slow to speak and slow to anger" 
Affiliate Code XZUMV9TJW5
Associate Code: 7PM43CU71IB2IAP
education may be expensive but wait until you get the bill for ignorance
A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
rjohnson11
EVGA Forum Moderator
  • Total Posts : 84312
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Netherlands
  • Status: offline
  • Ribbons : 85
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/08 01:22:25 (permalink)
The Ryzen 7 7800X3D CPU is the best gaming CPU out right now, if you're looking for an alternative mod for a gaming PC. 

AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/08 10:42:30 (permalink)
rjohnson11
The Ryzen 7 7800X3D CPU is the best gaming CPU out right now, if you're looking for an alternative mod for a gaming PC. 


With the fun side issues that can happen with AMD getting the right hardware configuration and there is some rare bug like in the past that would be my luck, to Microsoft doing an update and messing with them. I would rather not. 

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

cotter32
iCX Member
  • Total Posts : 265
  • Reward points : 0
  • Joined: 2018/07/19 01:36:14
  • Status: offline
  • Ribbons : 7
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/08 18:38:13 (permalink)
Awsome arm .
 
Too The Moon !
 
 
atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/09 09:21:35 (permalink)
Wow yeah you went all out. Nice souvenirs you have there Donta

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
B0baganoosh
CLASSIFIED Member
  • Total Posts : 2419
  • Reward points : 0
  • Joined: 2009/08/04 04:27:18
  • Status: online
  • Ribbons : 41
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/12 09:05:02 (permalink)
That is...a lot of work. It looks like a fun place to be. Probably brings a smile to your face everywhere you look. Well done.

6Q6CPFHPBPCU691 is a discount code anyone can use.
 
i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30  - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/13 18:09:13 (permalink)
So far Office Depo and now Amazon sent me the plain black Steelseries Headsets when I orderd the cyberpunk 2077 ones... So last shot is ebay if I get sent standard ones again I am giving up on that and hoping new ones come out for Phantom Liberty...
Guts upgrade is coming.
Got the AIO... it actually outperforms the EK Elite 360. UPS hub Jacksonville FL someone was so kind to put my package on the wrong truck... Then UPS tried to blame the weather, I was like hey have the common curtesy to tell me the truth please its not the weather because I got the other part of my order and for whatever reason they parted ways in Jacksonville FL. Yup low and behold it was put on the wrong truck. Thanked the UPS customer service agent, the funny part no updated tracking to wrong location with the redirect, it showed up in my city tonight magically.

My wifes CLC control board keeps going out, so will give her my current pc's 12900kf, z690 edge ddr4, ram & EK Elite, should push the 3090 TI more than well enough now over the 10900kf. I went with DDR5 7200 because I know that should work unless my 13900k is just horrible, most top out around 7400mhz, so avoided the 7600 kit to avoid dialing it down, didn't want to rely on chance/luck with the memory controller. 
post edited by donta1979 - 2023/04/13 18:17:01

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2023/04/15 19:58:45 (permalink)
Well guess I need to fully learn how to OC this 13900k and my DDR5. Got the gpu up high but then my cpu started to take performance hits. AIO is actually better than my EK Elite with six Vardar S fans... As it stands right now its the best one on the market it can actually cool a 13900k, friend is cooling his 13900KS with one.
https://www.3dmark.com/spy/37677239

CPU took a nasty hit once I really OCed the card.
https://www.3dmark.com/spy/37678018

Build I think is done, office is not have not touched it in days, have some more art to hang up, still tweaking my LED's to make them pop, waiting on my OLED Cyberpunk 2077 displate metal poster, need to hang up 2x of my Tarot CP 2077 Displate posters, waiting on custom key caps still, last attempt on a headset if I get a normal one instead of the Cyberpunk 2077 on this third attempt am giving up. Only upgrade I may do if I can find a Display arm that works on my Metal Magnus desk probably in fit and can handle the weight then will be going after a 45" LG OLED 3440x1440 Freesync+GSync Ultrawide display.


Checked my mailbox and finally! Just waiting on the dongle to show up to pair with it.




post edited by donta1979 - 2023/04/15 23:12:35

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

Flybye
FTW Member
  • Total Posts : 1195
  • Reward points : 0
  • Joined: 2006/11/17 23:55:10
  • Location: Miami (Cuba v2.1)
  • Status: offline
  • Ribbons : 4
Re: Do not even know what to name this... 2023/04/15 20:43:53 (permalink)
So I went through a bunch of pages, and I just realized I had forgotten to ask something. Did the contact frame actually keep lowering the temps after a few weeks of install as in it was slowly bending the CPU to the shape that it should be at?

Gaming thing
i9-12900KF @ 5.20GHz
EVGA: Z690 Classified - RTX 3080 FTW3 Ultra - Supernova 1200w P3 - DG-75
32GBs Corsair Dominator DDR5 @ 6800 - Seagate: .5TB, 1TB M.2s, HD 4TB
Sony CRT 24" GDM-FW900 16:10 - DangerDen (RIP) Goodies: 2x120mm Rad & D5 + Primochill stuff
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: Do not even know what to name this... 2023/04/15 23:05:24 (permalink)
Flybye
So I went through a bunch of pages, and I just realized I had forgotten to ask something. Did the contact frame actually keep lowering the temps after a few weeks of install as in it was slowly bending the CPU to the shape that it should be at?


it first started to lower temps, voltages reducing the bend in the first three days, about week 2 or 3 since my bow was so bad it was fully fine again better than when I first put the cpu into the board prior to the mass bowing. On the CPU lid bow you pretty much can get away with first putting an aio/cooler/block on and be fine, it will still happen eventually over time though... seen a few of those. The second an aio/cooler/block has to come off, the bowing of the lid fun really happens at an accelerated rate. At least that was my case.
post edited by donta1979 - 2023/04/15 23:10:52

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

B0baganoosh
CLASSIFIED Member
  • Total Posts : 2419
  • Reward points : 0
  • Joined: 2009/08/04 04:27:18
  • Status: online
  • Ribbons : 41
Re: Do not even know what to name this... 2023/04/17 12:06:20 (permalink)
I've found Time Spy to be completely crap on 13900k. I watched HWiNFO64 a few times and it was only using 2 cores, one P core and one e-core to run the test...and not even fully loading them (~38% and ~12% respectively). I asked UL about it and they responded back with an answer along the lines of that benchmark doesn't really know what cores are P/e and can't load more cores. They suggested Time Spy Extreme as it loads more cores. Basically they think it's a microcode/OS problem and don't care to make it work right. I actually got better scores on 12900k, but I'm wondering if it was just because it had fewer cores to choose from, so by chance it would pick more P-cores.

6Q6CPFHPBPCU691 is a discount code anyone can use.
 
i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30  - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
donta1979
Primarch
  • Total Posts : 9023
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: Do not even know what to name this... 2023/04/18 08:58:19 (permalink)
B0baganoosh
I've found Time Spy to be completely crap on 13900k. I watched HWiNFO64 a few times and it was only using 2 cores, one P core and one e-core to run the test...and not even fully loading them (~38% and ~12% respectively). I asked UL about it and they responded back with an answer along the lines of that benchmark doesn't really know what cores are P/e and can't load more cores. They suggested Time Spy Extreme as it loads more cores. Basically they think it's a microcode/OS problem and don't care to make it work right. I actually got better scores on 12900k, but I'm wondering if it was just because it had fewer cores to choose from, so by chance it would pick more P-cores.


Its more or less the same issue we had with DDR4 3200mhz performing about good as 3600mhz, then 36XX-3900mhz there was that wall of diminishing returns, that you had to bust though with DDR4 4000mhz+ CL14-16. DDR5 the first big gain was 6000-6600mhz, Then pretty much anything above 6600mhz to 7600mhz is nearly the same diminishing turn wall. Once you go to 7800-8000mhz you breach that performance diminishing return wall. I will say in CP 2077 I saw really no performance difference going from my 12900kf on DDR4 4000mhz CL16 b-die going to a 13900K on 7200mhz CL34 DDR5, I did see a huge jump in 3dmark went from 17.5k ish due to my 4090 reducing my CPU score or at least that's what I think it was only thing I changed out on that system, to an almost 22k cpu score in timespy. Friend gets an even higher CPU score than me on his 7800 and 8000mhz DDR5 kit.

I do agree they should upgrade it, but we know they probably won’t… :/
post edited by donta1979 - 2023/04/18 17:41:06

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

Page: << < ..678910.. > >> Showing page 10 of 15
Jump to:
  • Back to Mobile