EVGA

Hot!PC is finally finished, starting off as a built to order during the shortage.

Page: < 12345.. > >> Showing page 4 of 15
Author
Post
Essentials Only Full Version
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/12 21:01:26 (permalink)
ell all that’s left is 3x fans to show up, the figure for inside of case.  The custom made ARGB Acrylic GPU support Bracket to arrive. Applying my custom CPPC vinyl logos to new fans. Asking CPPC Support what LED Light strip they used in the front of the case to put it on the side. The Corsair ARGB Ram cooler to show up. Then my 3080 FTW3 Ultra Step-Up to happen. Cleaning the glass again... on a table.... May make a one or two EVGA Vinyl's for the case. Also will be doing some wire line art in yellow vinyl for the case to add a little more to it.





Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#91
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/13 21:09:26 (permalink)
I have Keanu Reeves in my case!
More fans added, has kept my boost clocks a little more at their higher boost. 
120mm magnetic dust filters
Still waiting on my custom GPU bracket to be made and shipped.
Corsair Dominator Platinum ARGB is coming so I do not have to have red all the time over the ram.
3080 FTW3 Ultra Step-up still in queue.
May flip my radiator back around.
All Vinyl so far has been cut and applied, I still need to design some yellow line wire work for the case and plan that out.
Oh and I finally found true yellow by accident for the ARGB's for the Dragon Control Center.
Still wish EVGA made Z490 FTW boards, guess that is not happening and they are EOL. =(


 







post edited by donta1979 - 2021/04/13 23:30:43

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#92
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/14 20:27:01 (permalink)
Custom Acrylic ARGB GPU Support bracket made and shipped.
May get two more RGB Light bars like in the front of my case for the side panel.
Need to do custom vendor line wire art for the case to add a little more to the large black areas. 
Step-Up to RTX 3080 FTW3 Ultra I hope happens this year but things are looking bleak after the tweak town article after what Nvidia posted.






Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#93
atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/15 17:02:45 (permalink)
😮. Not bad for a pre-build right?😸

That vinyl work gives me lots of ideas🤔. How much for a "No Hippies Allow "sticker?😁

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#94
MrQueez
Superclocked Member
  • Total Posts : 236
  • Reward points : 0
  • Joined: 2021/03/12 23:40:22
  • Status: offline
  • Ribbons : 0
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/15 19:35:48 (permalink)
Nice work here.
#95
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/16 00:23:39 (permalink)
atfrico
😮. Not bad for a pre-build right?😸

That vinyl work gives me lots of ideas🤔. How much for a "No Hippies Allow "sticker?😁


What’s funny is it’s nicer than a lot of the Maingear systems I have been lurking at on their discord lol.

I don’t do art for anyone else other than myself now, doing art for others ended on my retirement.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#96
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/16 00:29:14 (permalink)
MrQueez
Nice work here.


Ty much.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#97
atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/18 10:26:07 (permalink)
donta1979
atfrico
😮. Not bad for a pre-build right?😸

That vinyl work gives me lots of ideas🤔. How much for a "No Hippies Allow "sticker?😁


What’s funny is it’s nicer than a lot of the Maingear systems I have been lurking at on their discord lol.

I don’t do art for anyone else other than myself now, doing art for others ended on my retirement.



Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#98
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/21 22:01:05 (permalink)







Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#99
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/27 12:21:58 (permalink)
My custom ARGB GPU support bracket is still sitting in customs in NY.... smh, last bit of ram sitting in customs up in AK.... 

Still expecting 5-7 plus months honestly on my GPU step-up...

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#100
Armons account
Superclocked Member
  • Total Posts : 142
  • Reward points : 0
  • Joined: 2021/04/27 21:26:13
  • Status: offline
  • Ribbons : 0
Re: Do not even know what to name this... 2021/04/28 14:31:53 (permalink)
that's clean dude! 

Rig specs #1: Rtx 3070 FE (on air), 5900x, 64gb crucial ballistix 3600mhz CL16 RGB Ram,  addlink 2tb nvme ssd, WD SN750 1tb nvme ssd, bitspower water cooling parts for cpu (tubing, block, rad, distro plate), ASUS B550 XE, corsair RM850x, Lian Li o11 dynamic
 
Rig specs #2: EVGA GTX 970 SC (on air), 9700k, 32gb crucial ballistix 3200mhz CL16 RGB Ram, Seagate 2TB HDD, OCZ vertex 4 128gb SATA SSD, lian li Galahad 240mm AIO (For CPU), gigabyte Z390 M Gaming, corsair cx650M, Corsair "big boy case" Carbide Series Air 540
 
Rig specs #3: 2x XFX Radeon HD 7870 ghost (on air in cross fire mode), Some AMD FX 8 core CPU, 32gb Gskill 1600mhz CL9 RAM, Inland 128gb SATA SSD, some old corsair AM3+ 240mm AIO (for CPU), ASUS Crosshair V Formula-Z, An old Coolermaster 1200watt 80+ Gold rated PSU, Phanteks Eclipse (PH-EC300PTG_BK)
 
 
#101
ddog661
Superclocked Member
  • Total Posts : 112
  • Reward points : 0
  • Joined: 2021/04/14 23:11:33
  • Status: offline
  • Ribbons : 0
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/28 15:50:10 (permalink)
Some cool art forsure

EVGA Associate Code: S7J93UZF57CEOFM
Elite Program Referral Link: https://www.evga.com/member/elite/?referralid=NHS68RYWQ0PFNE7WHFBB
 
Use the associate code when purchasing an item or use the link when you meet the requirements to become an elite member (if you so desire)
#102
SterisTheGreen
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2021/04/28 16:54:55
  • Status: offline
  • Ribbons : 0
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/28 19:26:57 (permalink)
Honestly there's never been a better time to order a prebuilt. Almost always cheaper considering they're actually available without a scalper in between 

Buying EVGA? Use this code at checkout for up to 10% off your purchase: ZT4D9972JE14HZW

 
Already bought EVGA? Register your product here: 

 
#103
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: Do not even know what to name this... 2021/04/30 00:51:50 (permalink)
Wanted a better AIO for this i9 10900kf sooo.

Attached Image(s)


Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#104
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: Do not even know what to name this... 2021/05/01 12:06:19 (permalink)
My EK Elite 360 AIO will be here tomorrow, did a ton of reading. I think the Lian Li one is based off of the EK one looking at the pump it looks like EK's design. 3300RPM on the pump, over 2k RPM and 7X something CFM on the six 120mm fans, also found out the performance is very similar to the EK Classic Kit S360 starter liquid cooling kit. So here is to the first AIO with similar performance to base liquid cooling kits. Was supposed to be here today but that's ok. 

What did get here today that took about 3-3.5 weeks finally, RGB Custom Art GPU Support Bracket.

 
Also found out about OpenRGB if you download the 7zip file of its release it will let say MSI Dragon Center's Mystic Light Control Corsair Ram ARGB's it will treat it as a part on the board. So no Corsair 1.7gb control center bloatware download needed.
Adam Honse / OpenRGB · GitLab
post edited by donta1979 - 2021/05/01 12:09:31

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#105
Arztt
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2021/04/11 15:43:00
  • Status: offline
  • Ribbons : 0
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 08:52:37 (permalink)
BRUHHH, you've got 32 gigz of Memory but have a 3070? UPGRADE THE CARD!!!!
#106
Arztt
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2021/04/11 15:43:00
  • Status: offline
  • Ribbons : 0
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 08:53:45 (permalink)
Looks ****ing fantastic man
#107
atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 13:42:22 (permalink)
Arztt
BRUHHH, you've got 32 gigz of Memory but have a 3070? UPGRADE THE CARD!!!!

It is 64gb😲 not 32GB 😮
Beast mode has been activated😹😹
Let me go sip more of my haterade...😆
The acrylic bracket looks awesome.👍

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#108
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 18:23:18 (permalink)
Arztt
BRUHHH, you've got 32 gigz of Memory but have a 3070? UPGRADE THE CARD!!!!


BROOOOOO try 64gigs and tell EVGA to hurry up with step-up you slacker. What's wrong with you, holding stuff up. Ty though haha. I am trying to get that 3080... smh.
post edited by donta1979 - 2021/05/03 18:27:46

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#109
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 18:26:08 (permalink)
Well Got a real AIO dropped my temps by 40c so hello AIO with the cooling performance of a 250-270 dollar EK Classic Liquid cooling kit.
 
 




 
 

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#110
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 18:30:05 (permalink)
atfrico
Arztt
BRUHHH, you've got 32 gigz of Memory but have a 3070? UPGRADE THE CARD!!!!

It is 64gb😲 not 32GB 😮
Beast mode has been activated😹😹
Let me go sip more of my haterade...😆
The acrylic bracket looks awesome.👍

Oh you are going to have a whole cup of haterade when you find out how much the 3080 TI is going to be annnnd what my CPU temps are now at max load while benching.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#111
atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 20:37:18 (permalink)
donta1979
atfrico
Arztt
BRUHHH, you've got 32 gigz of Memory but have a 3070? UPGRADE THE CARD!!!!

It is 64gb😲 not 32GB 😮
Beast mode has been activated😹😹
Let me go sip more of my haterade...😆
The acrylic bracket looks awesome.👍

Oh you are going to have a whole cup of haterade when you find out how much the 3080 TI is going to be annnnd what my CPU temps are now at max load while benching.


is it below 60c? 👀
is the cost $1,200? just like the 2080Ti?
Should I get a keg of haterade so I won't stay thirsty?
 
1K Rig Contender 4 sure!
 
 

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#112
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/03 22:36:49 (permalink)
atfrico
donta1979
atfrico
Arztt
BRUHHH, you've got 32 gigz of Memory but have a 3070? UPGRADE THE CARD!!!!

It is 64gb😲 not 32GB 😮
Beast mode has been activated😹😹
Let me go sip more of my haterade...😆
The acrylic bracket looks awesome.👍

Oh you are going to have a whole cup of haterade when you find out how much the 3080 TI is going to be annnnd what my CPU temps are now at max load while benching.


is it below 60c? 👀
is the cost $1,200? just like the 2080Ti?
Should I get a keg of haterade so I won't stay thirsty?
 
1K Rig Contender 4 sure!
 
 


Cpu while gaming? Yup. Once I change out the Tim and crank up the fans it will drop from 61-67c per core down to the high 50’s per core.

Try 1200-1300 starting and up to to close to 2k for the modified cards. The 3080 TI’s floating on the market early now. 3-4K…
post edited by donta1979 - 2021/05/06 10:54:34

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#113
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/05 20:24:44 (permalink)








NVIDIA GeForce RTX 3070 video card benchmark result - Intel Core i9-10900KF Processor,Micro-Star International Co., Ltd. MPG Z490 GAMING CARBON WIFI (MS-7C73) (3dmark.com)
Almost ROFL. I can dream right?
post edited by donta1979 - 2021/05/05 22:22:17

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#114
jonnycard
Superclocked Member
  • Total Posts : 123
  • Reward points : 0
  • Joined: 2021/03/11 10:39:16
  • Location: U.K
  • Status: offline
  • Ribbons : 0
Re: Do not even know what to name this... 2021/05/06 01:48:03 (permalink)
Nice PC - seems the only way to get cards now it to buy prebuilts from retailers
#115
atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/06 22:40:05 (permalink)
donta1979


NVIDIA GeForce RTX 3070 video card benchmark result - Intel Core i9-10900KF Processor,Micro-Star International Co., Ltd. MPG Z490 GAMING CARBON WIFI (MS-7C73) (3dmark.com)
Almost ROFL. I can dream right?



Get a waterblock for that beastly 1750 mhz of memory clocks👀 3070 Ultra and you get to the Sith record 4 sure😁
post edited by atfrico - 2021/05/06 22:42:13

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#116
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/07 09:39:23 (permalink)
atfrico
donta1979


NVIDIA GeForce RTX 3070 video card benchmark result - Intel Core i9-10900KF Processor,Micro-Star International Co., Ltd. MPG Z490 GAMING CARBON WIFI (MS-7C73) (3dmark.com)
Almost ROFL. I can dream right?



Get a waterblock for that beastly 1750 mhz of memory clocks👀 3070 Ultra and you get to the Sith record 4 sure😁


Piss off and memory already went over that in the gpu:p Not messing up my stepup for your stupidity. Go screw up your own stuff.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#117
RyanKungl
New Member
  • Total Posts : 100
  • Reward points : 0
  • Joined: 2021/05/07 03:32:11
  • Status: offline
  • Ribbons : 0
Re: Do not even know what to name this... 2021/05/07 09:44:41 (permalink)
Nice computer! it's not the worst idea in the world to buy a full rig given the shortage of GPUs.
#118
atfrico
Omnipotent Enthusiast
  • Total Posts : 9738
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/07 14:39:24 (permalink)
The hippie force is strong within you🤔 🤣🤣🤣

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#119
donta1979
Primarch
  • Total Posts : 9028
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/05/08 13:44:25 (permalink)
atfrico
The hippie force is strong within you🤔 🤣🤣🤣

No far from it, just because I will not mess up my stuff to appease you does not make me a hippy. What your doing and your little scheme makes you one though. Just saying.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
#120
Page: < 12345.. > >> Showing page 4 of 15
Jump to:
  • Back to Mobile