nullack
Superclocked Member
- Total Posts : 201
- Reward points : 0
- Joined: 2010/05/05 18:55:05
- Status: offline
- Ribbons : 0
|
timaster
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2006/12/10 17:14:07
- Status: offline
- Ribbons : 1
Re:Marvell 91xx SATA 6Gb/s Controller Update
2010/08/15 07:12:57
(permalink)
|
DrNip
Superclocked Member
- Total Posts : 142
- Reward points : 0
- Joined: 2007/07/21 17:04:57
- Status: offline
- Ribbons : 11
Re:Marvell 91xx SATA 6Gb/s Controller Update
2010/08/15 18:24:47
(permalink)
Nice find. I hope the 9128 controller is better on the FTW3 because the 9123 on the Asus P6x58D Premium blows balls. Still a no go with Marvell drivers. Random BSOD's.
|
nullack
Superclocked Member
- Total Posts : 201
- Reward points : 0
- Joined: 2010/05/05 18:55:05
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/02/26 18:37:58
(permalink)
|
RetiredProfessor
Superclocked Member
- Total Posts : 165
- Reward points : 0
- Joined: 2010/09/25 05:07:08
- Location: USA
- Status: offline
- Ribbons : 5
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/02/27 07:37:21
(permalink)
Thanks. The latest revision is great! Here's the performance of my Western Digital HDD (Black 1 TB) before (left) and after (right) the new driver installation. On my system, I find substantial improvements particularly in the READ rates for small files.  Readers should note that the download is from a French website. So carefully scroll down the list of different drivers until you find the one for the Marvell 91xx devices. The revision number is 1.0.0.1051. All installation instructions and labels for the drivers are in English. I experienced no problems whatsoever in the download and installation.
post edited by RetiredProfessor - 2011/02/27 10:11:09
Switchable single-dual CPU rig Mobo: EVGA SR-2 w/ BIOS A46 or A49 & Windows 7 (64-bit edition). CPU: Xeon 5620 @2.40-2.66 GHz (single mode) & @3.3-3.5 GHz (dual mode), air cooled by Intel BXSTS100C heat sink. Memory: 12x1 GB Kingston Triple Channel 1.5-V DDR3 @ 1066 MHz with 7-7-7-20 timing. Video card: MSI GTX 460. PSU: 950-Watt ABS Majesty 80 Plus Certified Gold. Disks: OCZ Vertex2 & WD Black 1 TB. Case: Home-made from wood & aluminum mesh with mobo mounted on MountainMod tray. Comment: Every watt saved reduces the electricity bill & need for additional cooling solutions
|
Mac_vista64
SSC Member
- Total Posts : 986
- Reward points : 0
- Joined: 2008/10/03 14:25:43
- Status: offline
- Ribbons : 9
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/02/27 08:42:27
(permalink)
Another source: http://www.downloadatoz.c...ontroller-drivers.html Marvell 88SE9128, 88SE9120, 88SE9125, 88SE9123, 88SE9111 and 88SE9110. In addition, it also support Gigabyte X58A and P67A series, Asrock, Asus motherboards. I have been having trouble getting both ports to work on StarTech PEXSAT32 Marvel 91xx Amazon I hoped to put two SSDs on it.
Processor: Core i5 3570 @ 3.78GHz OS: Windows 8 HDD: WD 1TB Samsung 840 Memory: Corsair DDR3 2526GB 1600MHz Graphic: eVGA GTX 460 1GB Monitor: HP ZR24w
|
nullack
Superclocked Member
- Total Posts : 201
- Reward points : 0
- Joined: 2010/05/05 18:55:05
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/06/10 23:40:14
(permalink)
|
casperb
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2010/11/15 06:17:03
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/07/27 01:44:03
(permalink)
Thanks for posting the firmware updates and speed tests folks. Has anyone experienced troubles with disks disappearing in the O/S or anything like that after a few months of use with the new firmware or has your experience been error-free since you upgraded the firmware?
|
nullack
Superclocked Member
- Total Posts : 201
- Reward points : 0
- Joined: 2010/05/05 18:55:05
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/08/19 16:12:37
(permalink)
|
sr2boy
New Member
- Total Posts : 90
- Reward points : 0
- Joined: 2011/02/05 20:46:25
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/08/20 03:24:40
(permalink)
nice..... will be installing these
|
INFRNL
Superclocked Member
- Total Posts : 110
- Reward points : 0
- Joined: 2009/04/02 22:10:56
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/08/20 08:28:07
(permalink)
nice; thanks for finding these and keeping them updated; very much appreciated!
|
ladynsniffer
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2009/08/02 13:25:41
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/08/21 07:45:50
(permalink)
Hi, thanks for the link! I only see Ver 1.2.0.1006 (dated 08/11/11 on the download page). But, I was able to download and it is working fine. Also got the utility. Brings up a nice report on the controller: Thanks again! Marcus nullack
New revision:
Version 1.89.0.1006 WHQL (Xp/Vista/7) New
|
casperb
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2010/11/15 06:17:03
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/10/11 10:28:40
(permalink)
After you update these drivers and are booting your machine, at the point where you get a message stating the Marvell 9128 controller version, does it update to the latest version for you?
I installed v.1.2.0.1006
but when I reboot, the message says the Marvell driver is version 1.0.0.1012
|
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/10/11 10:29:55
(permalink)
Thank you sir, I am going RAID in a few hours, and this should deff help!
|
Halfdead14
SSC Member
- Total Posts : 973
- Reward points : 0
- Joined: 2009/07/17 21:31:10
- Status: offline
- Ribbons : 2
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/10/11 11:00:37
(permalink)
marvell controller is garbage, won't even take my sata 3 ssd past 240 read or 412 write
|
casperb
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2010/11/15 06:17:03
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/10/16 09:24:13
(permalink)
Halfdead - I hear you on the slow controller speed. When you boot, what version does the bios tell you it is running? Mine stays at the old version after bios update, I want to see if others' does too or if I'm doing something wrong.
|
ctgilles
Superclocked Member
- Total Posts : 120
- Reward points : 0
- Joined: 2008/06/07 01:25:29
- Location: Confused
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/10/17 04:28:32
(permalink)
Halfdead14
marvell controller is garbage, won't even take my sata 3 ssd past 240 read or 412 write
So true, I put mine back on the Intel. Stability is more important than speed for me atm  I hope one of the next versions improves Marvell stability because my ICH10 is almost full 
|
terminou
Superclocked Member
- Total Posts : 203
- Reward points : 0
- Joined: 2009/12/12 07:02:45
- Location: FR
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/10/20 03:59:19
(permalink)
what do you recommend then for SATAIII on SR2 ?
WARMACHINE
EVGA SR2, Bi Xeon 5680, 6 * 2 GO Corsair XMS3 Cas 9 2000MHz
MM Extended Ascension, Be Quiet 1200W P8 + 850W P9
2 EVGA GTX 580 Hydroccoper2 1,5G0 + 1 GTX 260 GS 896Mo WC (for PhysX)
1 SSD Crucial C300 128Go SATA III / 1 Velociraptor 600Go SATA III / OCZ Revodrive 3 120Go
2 WB CPU EK Supreme HF NICKEL-ACETAL, EK-FB SR2 - NICKEL-ACETAL
3 EK-Waterblocks radiateur CoolStream RAD-XT 360+1 phobya 360 G-Changer + 26 be quiet 120mm silentwings pure (PUSH/PULL)
2 DDC-1 Plus 12 Volts 18W, 2 Kaze Serveur 5,25" noir SCYTHE, 1 Réservoir Baie EK-BAY SPIN Acetal
Feser One Cooling Fluid (BLUE)
|
jabloomf1230
Superclocked Member
- Total Posts : 132
- Reward points : 0
- Joined: 2009/03/04 15:40:47
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/10/21 15:23:30
(permalink)
|
Cypherdude
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2008/04/20 12:30:29
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/11/25 17:04:11
(permalink)
casperb
After you update these drivers and are booting your machine, at the point where you get a message stating the Marvell 9128 controller version, does it update to the latest version for you?
I installed v.1.5.0.1006 but when I reboot, the message says the Marvell driver is version 1.0.0.1012
Your driver version number will show up in your Windows Device Manager > Controllers > Driver Tab > Driver Details button. Click on the different files and below you will see the version numbers. When you first boot up and see the Marvell Controller screen, you will see what hard drives the controller senses and what the BIOS version number is. This is for firmware, not your drivers. You need both and they are different. Be aware, using the station-drivers firmware to update your Marvell controller firmware can be risky. The station-drivers firmware are not officially sanctioned by your motherboard maker. If you attempt to update your Marvell firmware and the process fails, you may permanently disable this controller possibly your entire motherboard. If you do update your Marvell firmware and you encounter problems either immediately after updating or later, you will probably not be able to return to the original Marvell BIOS firmware version your motherboard had when you bought it. Even if you find the original BIOS firmware version, which I doubt, many firmware updater programs do not allow downgrades. Unless you are an experienced system builder, I do not recommend you attempt to upgrade your Marvell BIOS firmware.
post edited by Cypherdude - 2011/11/25 17:17:58
|
Cypherdude
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2008/04/20 12:30:29
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/11/25 17:14:25
(permalink)
Has anyone who has an Asus P7P55D-E mobo downloaded and installed the latest drivers and firmware listed for the Marvell SE9123 controller on the station-drivers page? Because this is not an official page, I hesitate to use their files.
|
doorules
CLASSIFIED Member
- Total Posts : 4148
- Reward points : 0
- Joined: 2007/12/18 02:08:14
- Location: Newfoundland
- Status: offline
- Ribbons : 21
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/11/26 00:08:11
(permalink)
I have never had any issue with any driver from Station Drivers.
|
Cypherdude
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2008/04/20 12:30:29
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2011/11/26 02:15:38
(permalink)
doorules
I have never had any issue with any driver from Station Drivers.
What about the firmware, have you tried that? Which mobo do you have? Thanks in advance.
|
RyanMM
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2012/05/28 07:38:06
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2012/05/28 07:44:16
(permalink)
Trying to set up a X58 FTW3 with two Corsair SSDs in RAID1 on the Marvell 91xx.
Absolutely unworkable. I've tried basically every method I can possibly think of, but inevitably, after one or two successful boots into Windows, I get that 0xc0000225 error, OR, I boot and it tells me CHKDSK needs to run and it proceeds to mark just about every file on the hard drive corrupt.
I've updated to the latest (non-beta) drivers from Station-drivers and have the same problems no matter what. Going to take the 20% performance hit and put these in RAID on the Intel chipset and save myself the headache.
Marvell put out a utterly beta piece of hardware, everyone implemented it, and then they never actually got the thing working as it should've. Completely unacceptable, and yet just another nonsense system builders have to put up with because we've basically got no recourse.
|
sr2boy
New Member
- Total Posts : 90
- Reward points : 0
- Joined: 2011/02/05 20:46:25
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2012/05/28 22:51:52
(permalink)
did you try any new firmware for the ssd's? did you do the firmware update on the marvel side? its in the forum here to download 1701.
|
Cypherdude
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2008/04/20 12:30:29
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2012/05/29 01:12:48
(permalink)
RyanMM
Trying to set up a X58 FTW3 with two Corsair SSDs in RAID1 on the Marvell 91xx.
Absolutely unworkable. I've tried basically every method I can possibly think of, but inevitably, after one or two successful boots into Windows, I get that 0xc0000225 error, OR, I boot and it tells me CHKDSK needs to run and it proceeds to mark just about every file on the hard drive corrupt.
I've updated to the latest (non-beta) drivers from Station-drivers and have the same problems no matter what. Going to take the 20% performance hit and put these in RAID on the Intel chipset and save myself the headache.
Marvell put out a utterly beta piece of hardware, everyone implemented it, and then they never actually got the thing working as it should've. Completely unacceptable, and yet just another nonsense system builders have to put up with because we've basically got no recourse. Even if you manage to get your RAID'd SSD's working stable, which I doubt, your Marvell controller is probably connected to your mobo via PCIe x1. This means you will max out below the SATA3 threshold. The only choices you have is to either buy another mobo with native SATA3 RAID connectors or buy a PCIe x8 add-in card with SATA3 RAID. You have 1 PCIe x16 and 2 PCIe x8 so you should be able to do this. With all the problems I am reading from other owners with your mobo, it might be better to simply buy a new Z77-based mobo. The newest Z77-based mobo's have both native SATA3 RAID and USB 3.0 capabilities. The matching Intel Core i7 3770 Ivy Bridge also has many new features. It's tempting for me to upgrade because I also must deal with upgrading the Marvell, JMicron, and "Renesas" USB 3.0 controllers on my mobo. I do not have an eVGA mobo. I have an Asus mobo. After Asus moves on to the next generation of mobo's, as with probably most other mobo makers, they do not post any new drivers or firmware for the third party controllers on their mobo's. I am left with deciding if I want to take the risk of using the Station-drivers files. I have downloaded all 6. I have been updating my anti-virus software and performing scans on these files. Furthermore, the Station-drivers files are not really meant for any particular mobo. Sometimes they are meant for a separate plug-in card so you never know if you're going to have problems. Furthermore, Asus's included VIA sound drivers for their built-in "VIA VT1828S CODEC" aren't exactly great either.
|
RyanMM
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2012/05/28 07:38:06
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2012/05/30 15:59:29
(permalink)
Cypherdude
Even if you manage to get your RAID'd SSD's working stable, which I doubt, your Marvell controller is probably connected to your mobo via PCIe x1. This means you will max out below the SATA3 threshold. The only choices you have is to either buy another mobo with native SATA3 RAID connectors or buy a PCIe x8 add-in card with SATA3 RAID. You have 1 PCIe x16 and 2 PCIe x8 so you should be able to do this. With all the problems I am reading from other owners with your mobo, it might be better to simply buy a new Z77-based mobo. The newest Z77-based mobo's have both native SATA3 RAID and USB 3.0 capabilities. The matching Intel Core i7 3770 Ivy Bridge also has many new features.
It's tempting for me to upgrade because I also must deal with upgrading the Marvell, JMicron, and "Renesas" USB 3.0 controllers on my mobo. I do not have an eVGA mobo. I have an Asus mobo. After Asus moves on to the next generation of mobo's, as with probably most other mobo makers, they do not post any new drivers or firmware for the third party controllers on their mobo's. I am left with deciding if I want to take the risk of using the Station-drivers files. I have downloaded all 6. I have been updating my anti-virus software and performing scans on these files. Furthermore, the Station-drivers files are not really meant for any particular mobo. Sometimes they are meant for a separate plug-in card so you never know if you're going to have problems. Furthermore, Asus's included VIA sound drivers for their built-in "VIA VT1828S CODEC" aren't exactly great either.
It wasn't an option; Z77 meant new CPU too (X58 is the last of the 1366 boards), so that wasn't doable with the budget. I did update the Marvell firmware too, I think I went to 1.2.0.1020 which is newer than 1701. It just chafes me that they never got the damn chip to work. I'd take the PCIe x1 limitation; it was a RAID1 setup anyway.
|
sr2boy
New Member
- Total Posts : 90
- Reward points : 0
- Joined: 2011/02/05 20:46:25
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2012/05/30 17:09:30
(permalink)
1.2.0.1020 are just the drivers for marvel, im talking about firmware which you need to put on a usb or burn to cd so you couldnt of done that its on here to download 1701 which i think turns into 1.0.0.1028 when you bootup also on station drivers
|
RyanMM
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2012/05/28 07:38:06
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2012/05/30 17:12:03
(permalink)
I mis-c/p'd.
It was firmware 2.2.0.1125, and yes, I did have to burn them to a disc and execute from there.
|
sr2boy
New Member
- Total Posts : 90
- Reward points : 0
- Joined: 2011/02/05 20:46:25
- Status: offline
- Ribbons : 0
Re:Marvell 91xx SATA 6Gb/s Controller Update
2012/05/30 17:53:11
(permalink)
i remember i had firmware issuies with a corsair ssd in which i had bsods no matter what it was up until i secure erased the ssd i no longer had problems, i dont know if you tried it yet or not but its definitly reconmended also try new firmware of your ssd go to corsair forums
|