Leviathan V5 Build Update 8/26/19:
RESURRECTION: Yet another update to this build. Primarily GPU swap from 1080ti to 2080ti with EK Vector block. This left the CPU EVO Supremacy block looking old, so I upgraded that as well to EK's Velocity block. Due to more LED's in the mix, added an XSPC LED splitter hub. Added a 970 EVO Plus 1TB M2 to replace the x2 M2s/PCIE M2 adapter. Coolant replacement, Mayhems X1 Clear. Final upgrade to this build???



 
Leviathan V4 Build Update 2/1/19:
This is now the 4th change I believe in this case? From a standard AIO setup on CPU/GPU to a custom hardline single 360 to adding another 120mm radiator to modding the case and adding fans on the top and now to replacing that back 120mm radiator with a 360mm radiator on the top after modding/cutting the top out while keeping the outside shroud aesthetic looking straight and clean. I used a radiator/fan shroud from Koolance that matched the colors almost perfectly, and fit perfectly for the project to keep it looking clean and only adds 1 1/2" to the height. Initial temperatures have dropped by 10-15C and quieter on the fans, but needs more testing. Added a larger reservoir to better fill the case, EK 250. Color of the coolant for now was changed to just clear by Mayhems X1. Also added a fan controller from Deepcool.





 
Metatron Build 10/8/16:
https://forums.evga.com/Metatron-m2561427.aspx
 
 
Parts:
Case: In Win 805 Infinity Black
Motherboard: Asus ROG Strix X99
Processor: Intel Core i7-6850K
RAM: Corsair Dominator Platinum CL15 32GB DDR4 3000
Power Supply: EVGA SuperNOVA T2 1000
Graphics Card: EVGA 2080ti Reference
SSD: Samsung 970 EVO Plus M.2 1TB & EK Heatsink
Custom Sleeving: CableMod E-Series CARBON
LED: Cablemod RGB Strip
LED HUB: XSPC PWM Splitter
Fans: Gentle Typhoon 120MM fan 2150 PWM x8
Fan Controller: Deepcool FH-10 PWM
Grills: Mayhems (inner fans) & MNPCTECH (outer fans)
Action Figure Display: Figma Berserker Armor Action Figure
Monitor: Acer Predator X34
Small Monitor: ASUS ZenScreen
Keyboard: Corsair K95 RGB Platinum
Mouse: Logitech G900 Chaos Spectrum
Mousepad: Razer Manticor
Speakers: Bose Companion 2 Series III
 
Liquid Cooled Parts:
Fittings: EK 12mm HDC Nickle
Tubes: EK 12mm PETG
Flow indicator: Bitspower
Drain Valve: XSPC
CPU Block: EK Velocity RGB Custom Metallic
GPU Block: EK Vector RTX 2080 Ti RGB
GPU Backplate: EK Nickel
Reservoir/Pump Combo: EK D5 & 250 Reservoir
Radiators: EK 360x40mm, EK 360x28mm
Coolant: Mayhems X1 Clear
 
Mods:
Inner PC case bracket cut to accommodate 360mm radiator, also cut further for clear airflow from fan to radiator.
Drilled holes for reservoir/pump mount.
Cut out large rectangle on the top/drilled new screw holes for Koolance radiator shroud & MNPCTECH outer grill/fan mounting.
Cut one MNPCTECH fan grill to fit for upper mounting.
Cut out small piece of motherboard plastic near the ports to accommodate radiator/fittings space.
Painted PCIE Brackets.
Bitspower Thumb Screws.
 
Temperatures/OC:
Heaven Benchmark Test:
 
CPU OC: 4.5ghz 1.4v
        Temp: 52C
GPU OC: 2100mhz
        Temp: 52C
RAM OC: 3000mhz

very very nice setup

 
Very pleasing on the eyes.       

amg secksy

Wow!! great work, very nice build you got there.  The bends on the tubing are also very nice and the way you set up the EVO block with the Angled fittings is great. 

In your first post you mentioned more photos with a video. Do you have the video link?

Eagerly waiting! ;)

Sleinous
Eagerly waiting! ;)

Added the newest photos I had to replace the old with the more complete mod.
I went back in and milled out more of the top part aluminum as previously I ran out of time and had to wrap it up.
This time I went all the way and cleaned up most of the opening/colored the aluminum cut part to match the black better, even though it's kind of hidden under that grill on the top.
 
note to anyone if you don't know: PETG tubing scratches very easily, any amount of work or moving things around or undoing fittings etc, those tubes scratch way too easily. Short of just re-doing new bends, I used a car headlight solution called PlastX by Meguiars, without sanding, it cleared up most of the scratches, works great on light scratches without having to sand it.
 

XrayMan
 "Leviathan".  Sounds like a name of a past movie.

Movies, video games, religion, beliefs, all over.

Hello I have same case and plan to cut the case fans on top. Can I ask how you cut it? We're you able to take the top of the case off?

Still looking forward to the video but despite that this beast is a masterpiece.

Video finally added at the top in the first post. (Not the greatest quality, but it's something.)
Coolant upgraded to PrimoChill's Vue liquid.
 
Video is done in 3 parts, one with color changing and no window, another with static color and lighting to see the fluid and no window, and the last one with the window on.

Nice work.

Another update added...final form? Probably.

V5 Updated.