QueueCumber
Superclocked Member
- Total Posts : 239
- Reward points : 0
- Joined: 2007/04/19 09:55:46
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 07:46:57
(permalink)
Cadillac94pimpin
Are you hitting the power limit in GPUZ?
Yeah, vRel/vOP with both the KP and FTW3 Ultra. Not seeing any benefit to the KP over the FTW3 Ultra thus far for all the extra cooling they added.
|
redarman
Superclocked Member
- Total Posts : 230
- Reward points : 0
- Joined: 2020/01/30 05:45:42
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 07:50:36
(permalink)
What power numbers should i watch in hardware info to check if my KPE is reaching the 520W limit?
|
emmett
SSC Member
- Total Posts : 513
- Reward points : 0
- Joined: 2008/03/30 23:42:22
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 08:16:50
(permalink)
I got mine yesterday, My time was 6:00:35 .
Gonna put it in in a bit.
Currently using Gigabyte Z370 Aorus Gaming 7 EVGA 2080 TI KingPin Intel 9900K GSkill 3200 EVGA G2 1300
|
enewt
Omnipotent Enthusiast
- Total Posts : 11883
- Reward points : 0
- Joined: 2020/09/21 18:01:11
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 08:23:12
(permalink)
emmett
I got mine yesterday, My time was 6:00:35 .
Gonna put it in in a bit.
Congratulations! I've added you to the google sheet for completeness. Enjoy your gaming goodness!
|
hallowen
CLASSIFIED ULTRA Member
- Total Posts : 5644
- Reward points : 0
- Joined: 2008/06/18 15:38:00
- Location: In a Galaxy Far, Far Away...
- Status: offline
- Ribbons : 14
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 08:25:11
(permalink)
It is sad that no one knows before hand the actual ASIC Bin # of the new 3090 Kingpins before they buy them.  Anybody remember when the EVGA GTX 980 Kingpins came out that you could buy them depending on how high an ASIC Bin you wanted?  
post edited by hallowen - 2020/12/02 08:40:08
Attached Image(s)
ASUS: Rampage VI Extreme | i9-7940X | 2X RTX 2080 Ti Kingpin SLI | 32GB DDR4 3200MHz Memory - SAGER: NP9870-G | i7-6700K | GTX 980M 8GB | 64GB DDR4 | 950 PRO M.2 512GB | 17.3 QHD 120Hz Matte G-Sync | Prema bios - EVOC Premamod: P870TM1 | i9-9900K-LM | RTX 2080N 8GB | Modded Vapor Chamber | 32GB 3000MHz Ripjaws | 960 EVO M.2 1TB | 17.3 3K QHD 120Hz Matte G-Sync | Intel 8265 -
|
redarman
Superclocked Member
- Total Posts : 230
- Reward points : 0
- Joined: 2020/01/30 05:45:42
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 09:14:43
(permalink)
My FW version is 3.01.23 and BIOS is 94.02.42.00.0F from the information tab in PX1. Are these the latest?
|
QueueCumber
Superclocked Member
- Total Posts : 239
- Reward points : 0
- Joined: 2007/04/19 09:55:46
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 09:18:57
(permalink)
Lovely, now my KP seems to only want to work at 1920Mhz in all the modes, no matter what settings I supply via Precision X1...
|
redarman
Superclocked Member
- Total Posts : 230
- Reward points : 0
- Joined: 2020/01/30 05:45:42
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 09:20:48
(permalink)
QueueCumber
Lovely, now my KP seems to only want to work at 1920Mhz in all the modes, no matter what settings I supply via Precision X1...
guess we're beta testers now!
|
Cadillac94pimpin
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2019/03/26 23:51:35
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 09:43:07
(permalink)
hallowen
It is sad that no one knows before hand the actual ASIC Bin # of the new 3090 Kingpins before they buy them.
Anybody remember when the EVGA GTX 980 Kingpins came out that you could buy them depending on how high an ASIC Bin you wanted?
That's actually awesome. You know Vince did mention something about maybe bringing the classified back...
post edited by Cadillac94pimpin - 2020/12/02 09:48:12
i9-9900K EVGA 3090 KPE (PUSH PULL) MSI Z390 MEG ACE 32 GB 3200 MHZ CORSAIR H150i Pro WD BLACK SN750 SEASONIC 850W Focus Gold+ Lian Li O11D XL + 10x LL120s+3xML 120s
|
NetSiege
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2020/09/23 12:28:41
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 09:44:18
(permalink)
redarman
QueueCumber
Lovely, now my KP seems to only want to work at 1920Mhz in all the modes, no matter what settings I supply via Precision X1...
guess we're beta testers now!
As is going to be the case with any earlier adopter. EVGA has a good support history and I'm sure will release bios/firmware/drivers or RMA cards, but I think the general rule of thumb for most people is to keep their old cards or have a backup option if they have issues with their cards for the first couple weeks.
CPU: AMD Ryzen 3900XMotherboard: ASUS ROG Crosshair VIII FormulaGPU: 1x ASUS ROG Strix 1080TiRAM: 4x 16GB Corsair Vengeance RGB Pro @ 3200 MHzSSDs (NVME): Sabrent 1TB Rocket PCIe 4.0HDD: WD Gold 8TB 7200 RPMCase: Corsair Obsidian 500DPSU: Corsair HX1000 80+ PlatinumMonitor (Main): Acer Predator XB273K 4K @ 144hz w/ dual DPMonitor (2nd): Acer Predator XB271HU 1440p @60hzMonitor (3rd): Acer Predator XB271HU 1440p @60hzCooling Pump: Corsair Hydro X Series XD5Cooling CPU Block: Corsair Hydro X Series XC7Cooling GPU Block: Thermaltake Strix V-GTXRadiator 1: Corsair Hydro X Series XR7 360mmRadiator 2: Corsair Hydro
|
The-phantom
Superclocked Member
- Total Posts : 172
- Reward points : 0
- Joined: 2020/10/07 05:29:22
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 09:56:40
(permalink)
What is the average clock you guys are getting on games when you finished overclocking the kingpin in general?
|
Xero717
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2012/03/29 05:47:53
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 10:43:38
(permalink)
QueueCumber
Highest i was able to get on my KP on PR is 14,850 with the LN2 bios. My 3090 ftw3 ultra gets 14,600 on PR. That's a 1.7% difference in performance. 1.7% is a low enough number that I can say that it is likely due to chance or silicon lottery and not engineering differences.
I experienced this with last gen's Kingpin too, but mine was actually worse... my KP couldn't hit 2145 stable even with classified tool. My 2080 Ti XC Ultra (reference board) is able to hit 2160 with a power limited bios of 338w...And no I did not do LN2. Ended up returning it and eating a $300 restocking fee. I'm sure these are binned chips, but with how scarce the 3090 silicon is, the binning margin is probably top 50% of clockers rather than top 20%. Your story makes me really nervous to throw down 2k on another
post edited by Xero717 - 2020/12/02 11:04:42
|
jspataro99
iCX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2018/01/09 17:03:03
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 10:50:06
(permalink)
The-phantom
What is the average clock you guys are getting on games when you finished overclocking the kingpin in general?
+1 I’ve been hoping for gaming benchmarks on these, too, but I’m a noob to the KP and maybe no one actually plays games on the KP 🤨
CPU: Intel 19-12900K Cooling: NZXT Kraken x62 (Push/Pull) Motherboard: Gigabyte Z690 Aorus Master GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz RAM Cooling: Corsair Dominator Platinum Airflow RGB SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB SSDs (SATA): 1x Crucial MX300 1TB / 1x WD Blue 1TB / 1x WD Green 240GB HDD: 1x WD Blue 2TB 5400 RPM Case: Phanteks P600S PSU: EVGA G2 1300W 80+ Gold Fully Modular Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz) Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
|
redarman
Superclocked Member
- Total Posts : 230
- Reward points : 0
- Joined: 2020/01/30 05:45:42
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 10:52:47
(permalink)
jspataro99
The-phantom
What is the average clock you guys are getting on games when you finished overclocking the kingpin in general?
+1
I’ve been hoping for gaming benchmarks on these, too, but I’m a noob to the KP and maybe no one actually plays games on the KP 🤨
Since you're a noob you should know that so far (perhaps on a buggy original bios/firmware?) my aircooled 3090 FTW3 Ultra is performing better than my 3090 KPE.
|
Clovis559
SSC Member
- Total Posts : 563
- Reward points : 0
- Joined: 2020/09/18 13:53:08
- Status: offline
- Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:03:37
(permalink)
Just got my Kingpin :D
Walking home, they delivered it to my neighbors house and I live in the country. Also borderline had a heart attack...
|
jspataro99
iCX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2018/01/09 17:03:03
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:04:13
(permalink)
redarman
jspataro99
The-phantom
What is the average clock you guys are getting on games when you finished overclocking the kingpin in general?
+1
I’ve been hoping for gaming benchmarks on these, too, but I’m a noob to the KP and maybe no one actually plays games on the KP 🤨
Since you're a noob you should know that so far (perhaps on a buggy original bios/firmware?) my aircooled 3090 FTW3 Ultra is performing better than my 3090 KPE.
That’s what I’m reading with you and Queue, but unfortunately since I let my 3090 FTW3 Hybrid purchase email expire yesterday, I’m fully committed to buying the KP when my email shows up hopefully next week. I’ve been without a card since 11/11 when my 3090 FTW3 Ultra died and I wasn’t about to try another one given all the problems others have been having with that card and the Red Light of Death. So, even if the KP is not that much faster or at all than the FTW3, at least hopefully it won’t die after two days. I’m willing to pay extra for that peace of mind! Hope they release something soon to fix the issues you guys are having.
CPU: Intel 19-12900K Cooling: NZXT Kraken x62 (Push/Pull) Motherboard: Gigabyte Z690 Aorus Master GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz RAM Cooling: Corsair Dominator Platinum Airflow RGB SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB SSDs (SATA): 1x Crucial MX300 1TB / 1x WD Blue 1TB / 1x WD Green 240GB HDD: 1x WD Blue 2TB 5400 RPM Case: Phanteks P600S PSU: EVGA G2 1300W 80+ Gold Fully Modular Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz) Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
|
flyingtoaster85
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2016/12/10 22:24:59
- Location: Los Angeles
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:11:40
(permalink)
Kingpins are not only binned for clock speed. They are binned for performance. For example, my 2080ti KPE runs at 2115/2130/2145 summer/fall/winter. Yet it consistently benches 10500 in PR on the stock bios and voltage. It scales like crazy with ice water. It also runs below 300w. Look at the overall performance and cold scaling, not just the core speed.
post edited by flyingtoaster85 - 2020/12/02 11:18:00
Main: 10700k @ 5.4ghz, 3090 K|NGP|N Hydrocopper, 4x8 @4300 16-16-16-36, EVGA 1200 P2, MSI Z490 Unify, 5 radiators, 2 pumps. Heavily modified Evolv ATX Travel size: Zen3 5800H, RTX 3060 Laptop GPU w/unlocked bios, 2x16 Kingston HyperX 3200 C20
|
boxcarspawn
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2020/11/05 08:29:06
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:17:48
(permalink)
The-phantom
What is the average clock you guys are getting on games when you finished overclocking the kingpin in general?
I'm seeing about 2085 stable in game. I'm also having firmware issues so there's that.
|
testingtesting007
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2013/04/01 12:44:11
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:22:29
(permalink)
|
zyc321654
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/05/29 09:25:44
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:32:03
(permalink)
Got email at 11:20 am and purchased.
|
maxsul
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2006/08/05 11:37:27
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:42:31
(permalink)
zyc321654
Got email at 11:20 am and purchased.
A new batch went out i see. Good to know.
CPU: i9-10850k 5GHZ@1.35vcore MOBO: ASUS Prime z490-a VIDEO CARD: EVGA 3090 K|NGP|N CASE: Phanteks Enthoo 719 Cooler: Deepcool Castle 360EX RAM: Corsair Vengeance 64GB 3200 PSU: EVGA Super Nova G5 1000W SSD: Samsung 970 EVO Plus 500GB M.2 NVMe
|
chicagohawk
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2009/03/23 22:48:13
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:47:10
(permalink)
QueueCumber
Cadillac94pimpin
Are you hitting the power limit in GPUZ?
Yeah, vRel/vOP with both the KP and FTW3 Ultra. Not seeing any benefit to the KP over the FTW3 Ultra thus far for all the extra cooling they added.
Isn't vrel/vop voltage limit, not power? Hitting the max 1088mV or so that JC was hitting with just the software slider? Have you used the voltage dip switches yet? I would think JC used the dip switches to get his card up to ~2200MHz, which is what Jay and Vince were getting on the KP stream on stock cooler. Still, thats only ~50MHz or so more than what some air cooled 3090 owners are getting (~2145MHz I've seen a few times).
|
jspataro99
iCX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2018/01/09 17:03:03
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 11:47:16
(permalink)
maxsul
zyc321654
Got email at 11:20 am and purchased.
A new batch went out i see. Good to know.
Awesome!!! Let's see how many they get to today. We still have until 6 pm PST / 9 pm EST.
CPU: Intel 19-12900K Cooling: NZXT Kraken x62 (Push/Pull) Motherboard: Gigabyte Z690 Aorus Master GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz RAM Cooling: Corsair Dominator Platinum Airflow RGB SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB SSDs (SATA): 1x Crucial MX300 1TB / 1x WD Blue 1TB / 1x WD Green 240GB HDD: 1x WD Blue 2TB 5400 RPM Case: Phanteks P600S PSU: EVGA G2 1300W 80+ Gold Fully Modular Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz) Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
|
NICROD
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/01 12:19:58
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 12:11:22
(permalink)
|
Stickboy46
Superclocked Member
- Total Posts : 158
- Reward points : 0
- Joined: 2019/07/17 08:16:22
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 12:13:30
(permalink)
I'm midway on the list (:44) and nothing so far. So didn't make it down that far yet.
i7-10700kf @ 5.1 Corsair H150i Elite CapellixMSI Z490 ACE8gbx4 G.Skill TridentZ DDR 4000CL15EVGA 3090 KingpinCorsair AX1200iLian Li O11 XL Dynamic
|
Sajin
EVGA Forum Moderator
- Total Posts : 49176
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 12:15:50
(permalink)
Just got sent my e-mail link to purchase the card. 
|
NICROD
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/01 12:19:58
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 12:17:22
(permalink)
Sajin
Just got sent my e-mail link to purchase the card.
Congrats, very cool EVGA has more going out this week.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49176
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 12:17:49
(permalink)
|
Cjdowd80
Superclocked Member
- Total Posts : 130
- Reward points : 0
- Joined: 2019/11/10 15:52:17
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 12:22:47
(permalink)
Sajin
Just got sent my e-mail link to purchase the card.
congrats, look forward to seeing and hearing about your results! may the silicon gods be ever in your favor Sajin
Associate Code: HLZG20V1ZF4SZGW AMD Ryzen 9 5950x - Asus ROG Crosshair VIII Formula - 32gb (4x8gb) @3600 CL16 GSkill Trident Z NEO - EVGA RTX 3090 Kingpin - Corsair RMx 1000w 80+ Gold - Lian Li O11 Dynamic XL - EK 360mm AIO
|
Sajin
EVGA Forum Moderator
- Total Posts : 49176
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List
2020/12/02 12:23:26
(permalink)
Thanks. 
|