Thanks @Jspataro99 - at least we know, I just hope I get the card before my birthday :) 

Hopefully "late" next week is Wednesday, so I can order, pay for overnight, then have it in my PC for Cyberpunk lol.

gridironcpj
I wonder if the Hydro Copper will get an Auto Notify option whenever it shows up on the store page.  I would love to get my hands on a Kingpin.

Same, i was going for hydro ftw3 but after seeing there will be a hydro copper for the kingpin im waiting for that one now

The-phantom

jspataro99
Update on remaining KPE notify emails
https://twitter.com/evga_...34597424631803904?s=21

Does that mean all members in the queue will get an email late next week? Or is it just the next 15-20 people in the queue?

It sounds like it's a possibility that they will complete the list. 

Cadillac94pimpin

The-phantom

jspataro99
Update on remaining KPE notify emails
https://twitter.com/evga_...34597424631803904?s=21

Does that mean all members in the queue will get an email late next week? Or is it just the next 15-20 people in the queue?

It sounds like it's a possibility that they will complete the list. 

That is how I interpreted it as well (and what I expected from the initial tweets two weeks or so ago...the full queue by approximately December 15).  And around that time (plus or minus a few days), relighting the auto-notify button.

doorules
got the email 4 hours ago and already have shipping info 

You had to wait a week longer than the "first batch" members...I think you're entitled to a humblebrag.  
 
Just try not to accost the UPS driver before he turns off the truck's engine.  
 
Congratulations!

DarkClownX1X
Guess who has two thumbs and a Kingpin card installed.... This guy: https://1drv.ms/u/s!Am3UH_kcAxmjjfA4iWsUkvK-vyp6kQ?e=T6NZ6Q.  I can't believe I was able to fit a 3rd rad into my system.  I guess it is a good thing that the radiator is pretty thin.  I think a lot better cooling could be done with my PE rads.  I have a water block on my south bridge chip this forces me to use a PCIE riser board.  I'm using a linkup - ultra pcie 4.0 x16 riser 15cm cable.    
13,527 Port Royal out of the box no change on the default bios switch.  I'll start tweaking here soon.
 
Need to figure out what to tweak first and if I need a new BIOS or not.

Congratulations 🔥🔥🔥 waiting to see your overclocking results 😶

The-phantom

DarkClownX1X
Guess who has two thumbs and a Kingpin card installed.... This guy: https://1drv.ms/u/s!Am3UH_kcAxmjjfA4iWsUkvK-vyp6kQ?e=T6NZ6Q.  I can't believe I was able to fit a 3rd rad into my system.  I guess it is a good thing that the radiator is pretty thin.  I think a lot better cooling could be done with my PE rads.  I have a water block on my south bridge chip this forces me to use a PCIE riser board.  I'm using a linkup - ultra pcie 4.0 x16 riser 15cm cable.    
13,527 Port Royal out of the box no change on the default bios switch.  I'll start tweaking here soon.
 
Need to figure out what to tweak first and if I need a new BIOS or not.

Congratulations 🔥🔥🔥 waiting to see your overclocking results 😶

I switch to the OC BIOS.  Not the most impressive but 14,590.  1,100 memory offset and 150 GPU. I few note worthy items:
1. I'm on a PCIe Riser. Seems to be working on Gen 4 setting but probably impacts score.
2. Even on the OC bios I only pulled ~450w. 
3. My case setup isn't ideal
4. I didn't do any other special voltage settings (Classified).
5. I'm running an EVGA 1,000W power supply I'm not sure that is enough.
6. I'm running a beta MB BIOS and haven't dialed in the setting on it yet.
 
For gaming and normal usage I've set mem: +900 and GPU: +125.  The lower than expected power draw is strange.  Is there a BIOs I need to flash the card with?

DarkClownX1X

The-phantom

DarkClownX1X
Guess who has two thumbs and a Kingpin card installed.... This guy: https://1drv.ms/u/s!Am3UH_kcAxmjjfA4iWsUkvK-vyp6kQ?e=T6NZ6Q.  I can't believe I was able to fit a 3rd rad into my system.  I guess it is a good thing that the radiator is pretty thin.  I think a lot better cooling could be done with my PE rads.  I have a water block on my south bridge chip this forces me to use a PCIE riser board.  I'm using a linkup - ultra pcie 4.0 x16 riser 15cm cable.    
13,527 Port Royal out of the box no change on the default bios switch.  I'll start tweaking here soon.

Need to figure out what to tweak first and if I need a new BIOS or not.

Congratulations 🔥🔥🔥 waiting to see your overclocking results 😶

I switch to the OC BIOS.  Not the most impressive but 14,590.  1,100 memory offset and 150 GPU. I few note worthy items:
1. I'm on a PCIe Riser. Seems to be working on Gen 4 setting but probably impacts score.
2. Even on the OC bios I only pulled ~450w. 
3. My case setup isn't ideal
4. I didn't do any other special voltage settings (Classified).
5. I'm running an EVGA 1,000W power supply I'm not sure that is enough.
6. I'm running a beta MB BIOS and haven't dialed in the setting on it yet.
 
For gaming and normal usage I've set mem: +900 and GPU: +125.  The lower than expected power draw is strange.  Is there a BIOs I need to flash the card with?

Did you try the LN2 BIOS? That is supposed to be a 520W PL. It's not really an LN2 BIOS. Still waiting on one. 

Cadillac94pimpin
No where near this many people bought the 2080 Ti Kingpin right? I know it came out much later than the initial 2080 Ti product stack. I got my 2080 Ti Black in April 2019. I can't recall if the Kingpin was out then but I think It may have been. 

I bought my 2080ti FTW3 Ultra Hybrid in February 2019 and I don’t remember seeing the Kingpin on the EVGA site at that time. But that was still pretty early on for that product release.

Noooooooo. I was at work for 12 hours driving a delivery truck and missed my notify. What do I do?
 
I tweeted at jacob and replied to the email. They've been resending for notifies for other cards no questions asked.

its around closing time for them you might not get email to tomorrow 

xBigWillyStylex
Noooooooo. I was at work for 12 hours driving a delivery truck and missed my notify. What do I do?
 
I tweeted at jacob and replied to the email. They've been resending for notifies for other cards no questions asked.

I am confident you will get this resolved tomorrow.  You've done all the right things: reply to the email with your intent to purchase, tweet at JacobF.  I would now call at 9:01 am PT tomorrow (Toll Free: +1.888.881.EVGA (3842)) and they should be able to get this sorted immediately.  
 
Best of luck!  Go get your card!!!

@xBigWillyStylex
 
Boom! 
 

 
  Sleep well tonight!

boxcarspawn

DarkClownX1X
Guess who has two thumbs and a Kingpin card installed.... This guy: https://1drv.ms/u/s!Am3UH_kcAxmjjfA4iWsUkvK-vyp6kQ?e=T6NZ6Q.  I can't believe I was able to fit a 3rd rad into my system.  I guess it is a good thing that the radiator is pretty thin.  I think a lot better cooling could be done with my PE rads.  I have a water block on my south bridge chip this forces me to use a PCIE riser board.  I'm using a linkup - ultra pcie 4.0 x16 riser 15cm cable.    
13,527 Port Royal out of the box no change on the default bios switch.  I'll start tweaking here soon.
 
Need to figure out what to tweak first and if I need a new BIOS or not.

Is that an 80mm fan art the back of the case? I'm guessing that's the lian li dynamic right. I'm about to build in it and was just looking for a fan for the rear

All 120mm fans in the case.
switched to LN2 bios and messed around with Classified a little.  Couldn't break 15,000 ended up with a 14,976.  I'm thinking of starting an owners thread maybe get all the config info etc in one place.  The GPU temp rises to quickly I can't keep in below 40c where it needs to be to get higher scores.  I was able to pull a lot more watts though over 550 at one point.
 
p.s. the case is on O11 XL.