frodoz737
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2022/09/27 22:17:11
- Location: Texas
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 07:52:22
(permalink)
My only concern with the current EVGA "3x8 to 12" and "2x8 to 12" adapters is duty cycle. Breakdown of the 41s looks more like a beefed up buss bar and less volatile to damage during management and maintenance. The quality of the cables from the PSU are a different qualifier.
post edited by frodoz737 - 2022/09/28 10:21:28
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2011/05/20 06:20:30
- Location: Florida
- Status: offline
- Ribbons : 14
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 09:54:49
(permalink)
frodoz737 My only concern with the current EVGA "3x8 to 12" and "2x8 to 12" adapters is duty cycle. Breakdown of the 41s looks more like a beefed up buss bar and less volatile to damage during management and maintenance. The quality of the cables from the PSU are a different qualifier.
I agree 100% with your assessment of the 41S. I also have my name in the auto-notify, just in case. But it is overkill for my needs. There doesn't seem to be any good info to tell us for sure if that plug cycle figure is truly real for all those connectors. The Corsair guy seemed to think it's "some connectors" but not widespread. He said there have been no failures at all in their lab. What makes me think it may be overblown is that that 30 cycle figure was in that special test situation and it happened to the connectors only when the cables were also abusively bent. So, is it some that were poorly made? Or is it widespread due to the design of the female pins used? It seems to me that they could be more robustly made and still fit in the connector housing. Until we get more data I will trust the psu brands and their oems that have a quality reputation like EVGA, Seasonic, Corsair and Super Flower (both brand and oem). I believe that in their testing they would have plugged and unplugged so often that the defect would have been discovered. Especially EVGA because they test their own cards and their own power supplies. It's irresponsible for JayzTwoCents to yesterday make a video telling people that the connector is rated for only 30 cycles. If the official rating was only 30 cycles then it wouldn't have been used until redesigned in my opinion.
post edited by frankd3 - 2022/09/28 09:56:16
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 10:03:34
(permalink)
frodoz737 I just prefer avoiding pigtails. Already covered "clean" power with the Corsair. 4x8 is nice though...so long as nothing gets cooked. This GPU was the single most expensive piece of my build in progress. pcpartpicker.com/list/zCn2Bj
ll the cables in the world, THE GPU won’t request any more power than the board itself will allow. PSU’s do not push power, the give power, so think of the PSU as the hose that provides water, and the GPU as the valve that allows more or less in. The GPU says “I want more” and the PSU says “sure, why not”. Have 4 connectors just means it can pull the power across more connections. The dual 6 pin PerFE cable still provides clean power across the 6 pins, because the 12 pin side only uses 6 negative and 6 positive. The main difference will be the temperature of the cable itself, which will be way way under the maximum rating of the 150c temperature maximum, and the maximum wattage rating.
|
dragomirc
SSC Member
- Total Posts : 761
- Reward points : 0
- Joined: 2006/08/14 20:40:01
- Location: Rochester, US
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 10:35:26
(permalink)
I love adapters in general. They make life easier but this one need a PC test bench or full tower roomy case. @Sajin You are going to have 4090 soon, very soon, and you know it.
|
frodoz737
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2022/09/27 22:17:11
- Location: Texas
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 10:43:29
(permalink)
Thanks. I've been chasing sparks most of my life, so you're kinda preaching to the choir. My gut's telling me if the Powerlink 41s are out of stock now, they might not be back...all things considered...so preference at this point may be academic.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49125
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 12:01:27
(permalink)
dragomirc @Sajin You are going to have 4090 soon, very soon, and you know it.
Nope, waiting for the fully enabled chip to drop before I make a purchase. 😊
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2011/05/20 06:20:30
- Location: Florida
- Status: offline
- Ribbons : 14
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 12:31:25
(permalink)
What I wrote above about the 30 cycles of the connector is wrong. I apologize because I thought the connectors should be designed for better service life and tried to justify my conclusion. My statement above: https://forums.evga.com/FindPost/3578119 rjohnson11's thread does an excellent job of diving into this issue. I'll stay out of it from now on. https://forums.evga.com/FindPost/3576968 The surprising part for me is the Molex spec referenced in the discusion section of the Teckpowerup article. I encourage everyone to check it out. Quote from the discussion: "This is an irresponsible article. 30 connection cycles is an industry standard and this rating does not make this any less safe than the PCIe connectors you've already been using. Proof: www.molex.com/webdocs/datasheets/pdf/en-us/0455860005_PCB_HEADERS.pdf "
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
lastsamurairick
FTW Member
- Total Posts : 1708
- Reward points : 0
- Joined: 2008/11/11 17:19:53
- Location: Orlando,FL
- Status: offline
- Ribbons : 6
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 12:47:31
(permalink)
Yea makes GPU longer. oh well here it goes
Intel 10900k @ 3.7 Stock EVGA Z490 Dark EVGA GEFORCE RTX 3070Ti FTW3 G SKILL TRIDENT Z ROYAL 32GB EVGA 1000G5
|
dragomirc
SSC Member
- Total Posts : 761
- Reward points : 0
- Joined: 2006/08/14 20:40:01
- Location: Rochester, US
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 13:47:28
(permalink)
Sajin Nope, waiting for the fully enabled chip to drop before I make a purchase. 😊
How could I forgot; you just love XXXX TI edition
|
frodoz737
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2022/09/27 22:17:11
- Location: Texas
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/09/28 14:33:22
(permalink)
With Torrent I have the room, so 41s search remains active. Side bar...my TG Contact Frame and Lapping Tool arrived Stateside yesterday.
post edited by frodoz737 - 2022/09/28 15:56:31
|
=FIB=Goldberg
New Member
- Total Posts : 43
- Reward points : 0
- Joined: 2008/10/13 04:25:55
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/10/25 06:42:36
(permalink)
If anyone has 2 for sale im your man here in UK these are as rare as rocking horse poo
ROG Maximus Z690 Extreme / Intel 13900KS / 2 x EVGA RTX3090 Ti FTW3 / 2 x EVGA SuperNOVA 1200w / Caselabs Magnum TH10 case (white) /G Skill 32 gig DDR5 6000mhz / EVGA NU Audio Pro /
|
sgayden
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/10/20 07:58:43
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/10/26 11:41:19
(permalink)
I'd really like to find one as well! I'm on the auto-notify list, but not hopeful that they'll be fulfilled. :(
|
=FIB=Goldberg
New Member
- Total Posts : 43
- Reward points : 0
- Joined: 2008/10/13 04:25:55
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/10/30 16:31:36
(permalink)
I asked Jacob on Friday and he said it is unlikely they will be making any more
ROG Maximus Z690 Extreme / Intel 13900KS / 2 x EVGA RTX3090 Ti FTW3 / 2 x EVGA SuperNOVA 1200w / Caselabs Magnum TH10 case (white) /G Skill 32 gig DDR5 6000mhz / EVGA NU Audio Pro /
|
sgayden
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/10/20 07:58:43
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/10/30 21:17:18
(permalink)
That stinks, but understandable.
|
ComputerMD82
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2008/08/28 22:48:13
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/11/03 13:33:23
(permalink)
Also on the Notify list, letting the powers that be know where's still a demand for this. If anyone in the US is parting with one due to 4090 upgrade/etc, let me know.
"There's an old saying: Fortune favors the bold. Well, I guess we're about to find out."
|
808sting
iCX Member
- Total Posts : 462
- Reward points : 0
- Joined: 2012/04/13 15:04:51
- Location: US
- Status: offline
- Ribbons : 6
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/11/03 15:14:46
(permalink)
i9 13900KS, Asus ROG Hero Z690 MB, 32GB G.Skill DDR5-6400Gigabyte 4090 Gaming OCExternal open-loop w/Velocity2 WBCorsair 900D CaseFirecuda SSD 1TB & 2TB, EVO 970P 1TB, Black 8TBAsus & LG BD-RECorsair AX1600i PSLG 38GL950B-G
|
AudiTuner
Superclocked Member
- Total Posts : 168
- Reward points : 0
- Joined: 2007/07/30 16:55:20
- Location: United States
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/11/05 10:31:49
(permalink)
808sting If you're looking for a cleaner 1>4 adapter, CableMod says their cable supports the 3090ti. For limited PS models. Support – CableMod 12VHPWR PCI-e Cable – CableMod Global Store I ordered some and will try it on my 3090ti FTW3.
Very helpful, I was looking for something like this. Appreciate the links too, thank you.
|
Nereus
Captain Goodvibes
- Total Posts : 18148
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: Introducing the EVGA PowerLink 41s for the EVGA GeForce RTX 3090 Ti FTW3 Series
2022/11/05 12:44:36
(permalink)
808sting If you're looking for a cleaner 1>4 adapter, CableMod says their cable supports the 3090ti. For limited PS models. Support – CableMod 12VHPWR PCI-e Cable – CableMod Global Store I ordered some and will try it on my 3090ti FTW3.
Thanks for the link, might do the same on my 3090Ti with the EVGA 1600T2. Do you know what the difference is between ModFlex and ModMesh? One looks like maybe a tighter weave, not really sure.Found it: ModFlex is our softer, more flexible sleeving option. ModMesh is our stiffer, more vibrant sleeving option, which is also UV reactive, as well as a more durable sleeving type.
post edited by Nereus - 2022/11/05 12:55:39
|